Tsetse flies transmit trypanosomes that cause nagana in cattle, and sleeping sickness in humans. Therefore, optimising visual baits to control tsetse is an important priority. Tsetse are intercepted at visual baits due to their initial attraction to the bait, and their subsequent contact with it due to landing or accidental collision. Attraction is proposed to be driven in part by a chromatic mechanism to which a UV-blue photoreceptor contributes positively, and a UV and a green photoreceptor contribute negatively. Landing responses are elicited by stimuli with low luminance, but many studies also find apparently strong landing responses when stimuli have high UV reflectivity, which would imply that UV wavelengths contribute negatively to attraction at a distance, but positively to landing responses at close range. The strength of landing responses is often judged using the number of tsetse sampled at a cloth panel expressed as a proportion of the combined catch of the cloth panel and a flanking net that samples circling flies. I modelled these data from two previously published field studies, using calculated fly photoreceptor excitations as predictors. I found that the proportion of tsetse caught on the cloth panel increased with an index representing the chromatic mechanism driving attraction, as would be expected if the same mechanism underlay both long- and close-range attraction. However, the proportion of tsetse caught on the cloth panel also increased with excitation of the UV-sensitive R7p photoreceptor, in an apparently separate but interacting behavioural mechanism. This R7p-driven effect resembles the fly open-space response which is believed to underlie their dispersal towards areas of open sky. As such, the proportion of tsetse that contact a cloth panel likely reflects a combination of deliberate landings by potentially host-seeking tsetse, and accidental collisions by those seeking to disperse, with a separate visual mechanism underlying each behaviour.

BACKGROUND

Toys in pediatric office waiting rooms may be fomites for transmission of viruses.

METHODS

Eighteen samples were taken from office objects on 3 occasions. Samples were tested for presence of picornavirus (either rhinovirus or enterovirus) on all 3 sample days; in addition, January samples were tested for respiratory syncytial virus and March samples were tested for influenza A and B. In addition, 15 samples were obtained from the sick waiting room before and after cleaning. Polymerase chain reaction was used to detect picornavirus, respiratory syncytial virus, and influenza A or B virus. Finally, 20 samples were obtained from the fingers of a researcher after handling different toys in the sick waiting room, and samples were then obtained from all the same toys; all samples were tested for picornavirus by polymerase chain reaction.

RESULTS

Viral RNA was detected on 11 of 52 (21%) of toys sampled. Ten of the positives were picornavirus; 1 was influenza B virus. Three (30%) of 10 toys from the new toy bag, 6 of 30 (20%) in the sick child waiting room, and 2 of 12 (17%) in the well child waiting room were positive. Six (40%) of 15 toys in the sick waiting room were positive for picornaviral RNA before cleaning; after cleaning, 4 (27%) of 15 were positive in spite of the fact that RNA was removed from 4 of 6 of the original positives. Three (15%) of 20 toys in the sick waiting room were positive for picornaviral RNA, but RNA was not transferred to the fingers of the investigator who handled these toys.

CONCLUSIONS

About 20% of the objects in a pediatric office may be contaminated with respiratory viral RNA, most commonly picornavirus RNA. Cleaning with a disinfectant cloth was only modestly effective in removing the viral RNA from the surfaces of toys, but transfer of picornaviral RNA from toys to fingers was inefficient.

We investigated the survival of a pandemic strain of influenza A H1N1 on a variety of common household surfaces where multiple samples were taken from 4 types of common household fomite at 7 time points. Results showed that influenza A H1N1sw virus particles remained infectious for 48 hours on a wooden surface, for 24 hours on stainless steel and plastic surfaces, and for 8 hours on a cloth surface, although virus recovery from the cloth may have been suboptimal. Our results suggest that pandemic influenza A H1N1 can survive on common household fomites for extended periods of time, and that good hand hygiene and regular disinfection of commonly touched surfaces should be practiced during the influenza season to help reduce transmission.

Study of the effect of atmospheric relative humity (RH) on the adsorption of paraformaldehyde-generated formaldehyde gas on various surfaces and the effect of the adsorbed formaldehyde on the death rate of bacterial spores showed that increasing the RH caused a corresponding increase of formaldehyde levels on all surfaces. The amount peaked at 83% RH. The levels obtained at 100% RH were slightly below those at 83% RH. Cotton cloth had a much greater affinity for the gas at all RH than either glass or stainless steel. The death rate of bacterial spores on surfaces containing adsorbed formaldehyde was high for the first hour after removal from the formaldehyde atmosphere but decreased rapidly thereafter. This held true for both cotton and glass surfaces. Also, formaldehyde levels of 15 to 27 mug/ml of nutrient broth caused inhibition of bacterial growth, but levels above 27 mug/ml rendered broth sterile.

Chlorothalonil (tetrachloro-1,3-benzenedicarbonitrile, CAS 1897-45-6) is a pesticide that has been on the market for many years. It is used as a fungicide in agriculture, horticulture, and floriculture; as a wood preservative; and in paint. We report an epidemic of airborne irritant contact dermatitis, conjunctivitis, and upper airway complaints among seamstresses in a Portuguese trailer tent factory, which we attribute to chlorothalonil. All exposed workers had work-related skin symptoms. After patch testing, we showed that none of these were of allergic origin. Instead of allergic reactions, we noticed a delayed type of irritation after 72 hr to chlorothalonil and to the textile extracts containing high concentrations of chlorothalonil. Although allergic and irritant contact dermatitis from chlorothalonil has been described before, this is, as far as we know, the first time that a delayed type of dermatitis, conjunctivitis, and upper airway irritation after exposure to chlorothalonil in tent-cloth is described.

Polycyclic aromatic hydrocarbons (PAH) are organic pollutants that require remediation due to their detrimental impact on human and environmental health. In this study, we used a novel approach of sequestering a model PAH, phenanthrene, onto a solid carbon matrix bioanode in a microbial fuel cell (MFC) to assess its biodegradation coupled with power generation. Here, the bioanode serves as a site for enrichment of electroactive and hydrocarbon-degrading microorganisms, which can simultaneously act to biodegrade a pollutant and generate power. Carbon cloth electrodes loaded with two rates of phenanthrene (2 and 20 mg cm^-2) were compared using dual chamber MFCs that were operated for 50 days. The lower loading rate of 2 mg cm^-2 was most efficient in the degradation of phenanthrene and had higher power production capacities (37 mW m^-2) as compared to the higher loading rate of 20 mg cm^-2 (power production of 19.2 mW m^-2). FTIR (Fourier-Transform Infrared Spectroscopy) analyses showed a depletion in absorbance peak signals associated with phenanthrene. Microbes known to have electroactive properties or phenanthrene biodegradation abilities like Pseudomonas, Rhodococcus, Thauera and Ralstonia were enriched over time in the MFCs, substantiating the electrochemical and FTIR analyses. The MFC approach taken here thus offers great promise towards PAH bioelectroremediation.

Death rate studies were conducted to determine the effect of varying the concentration, humidity, and type of surface on the sporicidal activity of formaldehyde gas. Washed and unwashed spores were similarly exposed to detect the influence of residual nutrient growth medium upon the rate of kill. The results indicated that the sporicidal activity of formaldehyde gas varies directly with its concentration. Relative humidities (RH) over 50% proved essential for sterility. Spores on a porous surface (cotton cloth) were more readily killed at lower RH than those on a nonporous surface (glass). The reverse occurred at very high RH. At 75% RH, the unwashed spores on glass were killed faster than the washed spores.

OBJECTIVE

Environmental conditions often serve as critical enabling factors for health promotion. This article describes the effect of a preschool hygiene intervention program on classroom environmental conditions.

METHODS

Cluster randomized trial, with randomization at the level of the preschool.

METHODS

State-run preschools in Jerusalem.

METHODS

Forty secular and religious Jerusalem preschools (including 1029 children).

METHODS

A multidisciplinary hygiene intervention that included changes to the preschool environment.

METHODS

Presence of soap, soap dispenser, paper towel, paper towel dispenser, cloth towels, communal cup, or personal cups.

METHODS

Generalized estimating equations and Fisher's exact test were used to estimate the effect of the intervention program on environmental conditions.

RESULTS

Information was obtained from most (97.9%) visits. Baseline environmental hygienic conditions were poor. Relative to the control group, the following environmental conditions were better in the intervention group after program implementation: soap (odds ratio [OR] = 14.7; p < .01), paper towels (OR = 13.5; p < .01), communal cups (OR = .05; p < .01), soap dispensers (secular preschools only, p < .01), individual cups (secular, p < .01; religious, OR = 18.7; p < .02).

CONCLUSIONS

Environmental hygiene in the Israeli preschools studied was deficient at baseline but amenable to change. Improvement in environmental conditions was a necessary enabling factor for the changes in hand-washing behavior that were observed among the children. Sustained environmental change is possible in the preschool environment.

BACKGROUND

To ensure sustainable routine surveillance of mosquito vectors, simple, effective and ethically acceptable tools are required. As a part of that, we evaluated the efficiency of resting boxes baited with fresh and aging cattle urine for indoor and outdoor sampling of An. arabiensis in the lower Moshi rice irrigation schemes.

METHODS

A cattle urine treatment and re-treatment schedule was used, including a box with a piece of cloth re-treated with urine daily, and once after 3 and 7 day. Resting box with piece of black cloth not treated with urine was used as a control. Each treatment was made in pair for indoor and outdoor sampling. A 4 by 4 Latin square design was used to achieve equal rotation of each of the four treatments across the experimental houses. Sampling was done over a period of 6 months, once per week.

RESULTS

A total of 7871 mosquitoes were collected throughout the study period. 49.8% of the mosquitoes were collected from resting box treated with urine daily; 21.6% and 20.0% were from boxes treated 3 and 7 days respectively. Only 8.6% were from untreated resting box (control). The proportion collected indoors was approximately 2 folds greater than the outdoor. Of all mosquitoes, 12.3% were unfed, 4.1% full fed, 34.2% semi-gravid and 49.4% gravid.

CONCLUSIONS

Fresh and decaying cattle urine odour baited resting boxes offer an alternative tool for sampling particularly semi-gravid and gravid An. arabiensis. Evaluation in low density seasons of An. arabiensis in different ecological settings remains necessary. This sampling method may be standardized for replacing human landing catch.

The Starr-Edwards ball valve prosthesis is generally the standard by which other cardiac valve substitutes are compared. This report reviews information pertaining to several prostheses--the Beall mitral valve and the Bjork-Shiley, Braunwald-Cutter, Lillehei-Kaster and Smeloff-Cutter aortic and mitral valves--considered by some to have specific advantages over the Starr-Edwards valves. Hospital and late mortality rates after valve replacement are comparable for the four aortic valve prostheses reviewed and depend more on patient selection than on the specific prosthesis utilized. Extensive clinical experience with the Bjork-Shiley aortic valve indicates that this prosthesis offers hemodynamic advantages over ball valve prostheses, especially in patients with a small aortic root. Clinical experience with the Lillehei-Kaster pivoting disc prosthesis has been less extensive, but this model provides theoretical hemodynamic advantages similar to those of the Bjork-Shiley aortic valve prosthesis. Problems associated with cloth wear and the unexpectedly slow rate, in man, of tissue ingrowth into the fabric of the Braunwald-Cutter aortic valve prosthesis have been discouraging, although this prosthesis has been associated with a very low thromboembolic rate in patients receiving anticoagulant therapy. The Smeloff-Cutter aortic prosthesis is hemodynamically similar to the Starr-Edwards prosthesis and has been proved to be a reliable and durable aortic valve substitute over the past several years. Mortality after mitral valve replacement is also largely influenced by factors other than prosthetic valve design. On the basis of postoperative data, the five mitral valve prostheses reviewed do not appear to have substantial hemodynamic differences. For patients with a small left ventricular cavity the low profile prostheses, such as the Beall, Bjork-Shiley and Lillehei-Kaster, may be advantageous. Most available evidence indicates that patients receiving aortic or mitral valve prostheses should be given anticoagulant therapy postoperatively.

The orientation of adults of the myiasis species Wohlfahrtia magnifica and Lucilia sericata to artificial visual stimuli (cloth targets) and olfactory stimuli ('swormlure-4', a potent screwworm attractant), was studied in sheep pastures near to Sárbogard in Hungary. Experiments with odour-baited cloth targets, enclosed in electrocuting grids, demonstrated that colour was an important factor influencing catches on targets: a black target caught most flies of both species, with other colours in the following order of effectiveness, blue>> white>> yellow. Wohlfahrtia magnifica did not respond to swormlure-4 in the strong manner that L.sericata did. The sex ratios of W.magnifica caught on targets (67.2% males) and hand-netted from fence posts (68.8% males) were similar and biased towards males, whereas that of L.sericata on targets was strongly biased towards females (15.6% males), indicating a fundamental difference in the response of these two myiasis species towards the swormlure-baited targets. The orientation of these two species towards hosts was also recorded together with that of a third species, Phormia regina. Electric nets placed beside infested sheep caught significantly more flies of all three species than those placed beside uninfested sheep or in the absence of sheep. The sex ratio of W.magnifica caught around infested sheep was the reverse of that on targets, with 68.5% females. Wohlfahrtia magnifica responded more strongly to healthy, uninfested sheep than did L. sericata and P.regina. The potential for use of targets both for population monitoring and control is discussed.

The present study had the aim to test the repellent potential of the compound icaridin = Saltidin® against the tick species Ixodes ricinus and Ixodes persulcatus using different formulations of the compound. Tests were done on backs of impregnated human hands, on impregnated linen cloth and versus impregnated dog hair. It was found that 1. Ixodes persulcatus-the common Eastern European, Russian Ixodes species is significantly sensitive to icaridin = Saltidin® as I. ricinus protecting for the test period of 5 h. This is an important finding, since I. persulcatus is the vector of agents of the severe Eastern meningoencephalitis; 2. that this repellent compound acts similarly on both I. ricinus and I. persulcatus, when sprayed either on naked skin or on cloths; 3. that there are only slight differences in duration of the repellency when using different formulations containing icaridin = Saltidin®; 4. that icaridin = Saltidin® sprayed on dog hair has identical repellent effects like those seen on human skin and cloths; thus, this compound can also be used to protect animals such as dogs, cats, horses; and 5. that the icaridin = Saltidin® did not induce a bad sensation on skin, nor bad smells; furthermore, it was not sticky and did not leave residuals neither on clothes nor on dog's hair.

OBJECTIVE

The primary objective of this study was to identify the source and work practices that affect dermal exposure to polycyclic aromatic compounds (PACs) among hot-mix asphalt (HMA) paving workers.

METHODS

Four workers were recruited from each of three asphalt paving crews (12 workers) and were monitored for three consecutive days over 4 weeks for a total of 12 sampling days per worker (144 worker days). Two sampling weeks were conducted under standard conditions for dermal exposures. The third week included the substitution of biodiesel for diesel oil used to clean tools and equipment and the fourth week included dermal protection through the use of gloves, hat and neck cloth, clean pants, and long-sleeved shirts. Dermal exposure to PACs was quantified using two methods: a passive organic dermal (POD) sampler specifically developed for this study and a sunflower oil hand wash technique. Linear mixed-effects models were used to evaluate predictors of PAC exposures.

RESULTS

Dermal exposures measured under all conditions via POD and hand wash were low with most samples for each analyte being below the limit of the detection with the exception of phenanthrene and pyrene. The geometric mean (GM) concentrations of phenanthrene were 0.69 ng cm(-2) on the polypropylene layer of the POD sampler and 1.37 ng cm(-2) in the hand wash sample. The GM concentrations of pyrene were 0.30 ng cm(-2) on the polypropylene layer of the POD sampler and 0.29 ng cm(-2) in the hand wash sample. Both the biodiesel substitution and dermal protection scenarios were effective in reducing dermal exposures. Based on the results of multivariate linear mixed-effects models, increasing frequency of glove use was associated with significant (P < 0.0001) reductions for hand wash and POD phenanthrene and pyrene concentrations; percent reductions ranged from 40 to 90%. Similar reductions in hand wash concentrations of phenanthrene (P = 0.01) and pyrene (P = 0.003) were observed when biodiesel was substituted for diesel oil as a cleaning agent, although reductions were not significant for the POD sampler data. Although task was not a predictor of dermal exposure, job site characteristics such as HMA application temperature, asphalt grade, and asphalt application rate (tons per hour) were found to significantly affect exposure. Predictive models suggest that the combined effect of substituting biodiesel for diesel oil as a cleaning agent, frequent glove use, and reducing the HMA application temperature from 149°C (300°F) to 127°C (260°F) may reduce dermal exposures by 76-86%, varying by analyte and assessment method.

CONCLUSIONS

Promising strategies for reducing dermal exposure to PACs among asphalt paving workers include requiring the use of dermal coverage (e.g. wearing gloves and/or long sleeves), substituting biodiesel for diesel oil as a cleaning agent, and decreasing the HMA application temperature.

The microbial fuel cell (MFC) is a novel and innovative technology that could allow direct harvesting of energy from wastewater through microbial activity with simultaneous oxidation of organic matter in wastewater. Among all MFC parts, electrode materials play a crucial role in electricity generation. A variety of electrode materials have been used, including plain graphite, carbon paper and carbon cloth. However, these electrode materials generated only limited electricity or power. Recently, many research studies have been conducted on carbon nanotubes (CNTs) because of their unique physical and chemical properties that include high conductivity, high surface area, corrosion resistance, and electrochemical stability. These properties make them extremely attractive for fabricating electrodes and catalyst supports. In this study, CNT-based electrodes had been developed to improve MFC performance in terms of electricity generation and treatment efficiency. Multi-walled carbon nanotubes (MWCNTs) with carboxyl groups have been employed to fabricate electrodes for single-chamber air-cathode MFCs. The quality of the prepared MWCNTs-based electrodes was evaluated by morphology, electrical conductivity and specific surface area using a field emission scanning electron microscope, four-probe method and Brunauer-Emmerr-Teller method, respectively. The performance of MFCs equipped with MWCNT-based electrodes was evaluated by chemical analysis and electrical monitoring and calculation. In addition, the performance of these MFCs, using MWCNTs as electrodes, was compared against that using commercial carbon cloth.

Quantitative proteomics from low biomass, biofilm samples is not well documented. In this study we show successful use of SWATH-MS for quantitative proteomic analysis of a microbial electrochemically active biofilm. Shewanella oneidensis MR-1 was grown on carbon cloth electrodes under continuous anodic electrochemical polarizations in a bioelectrochemical system (BES). Using lactate as the electron donor, anodes serving as terminal microbial electron acceptors were operated at three different electrode potentials (+0.71 V, +0.21 V & -0.19 V vs. SHE) and the development of catalytic activity was monitored by measuring the current traces over time. Once maximum current was reached (usually within 21-29 h) the electrochemical systems were shut off and biofilm proteins were extracted from the electrodes for proteomic assessment. SWATH-MS analysis identified 704 proteins, and quantitative comparison was made of those associated with tricarboxcylic acid (TCA) cycle. Metabolic differences detected between the biofilms suggested a branching of the S. oneidensis TCA cycle when grown at the different electrode potentials. In addition, the higher abundance of enzymes involved in the TCA cycle at higher potential indicates an increase in metabolic activity, which is expected given the assumed higher energy gains. This study demonstrates high numbers of identifications on BES biofilm samples can be achieved in comparison to what is currently reported. This is most likely due to the minimal preparation steps required for SWATH-MS.

Progress has been made in a 12 year's systemic study on the rice transgene flow including (i) with experiments conducted at multiple locations and years using up to 21 pollen recipients, we have elucidated the patterns of transgene flow to different types of rice. The frequency to male sterile lines is 10(1) and 10(3) higher than that to O. rufipogon and rice cultivars. Wind speed and direction are the key meteorological factors affecting rice transgene flow. (ii) A regional applicable rice gene flow model is established and used to predict the maximum threshold distances (MTDs) of gene flow during 30 years in 993 major rice producing counties of southern China. The MTD0.1% for rice cultivars is basically ≤5 m in the whole region, despite climate differs significantly at diverse locations and years. This figure is particularly valuable for the commercialization and regulation of transgenic rice. (iii) The long-term fate of transgene integrated into common wild rice was investigated. Results demonstrated that the F1 hybrids of transgenic rice/O. rufipogon gradually disappeared within 3-5 years, and the Bt or bar gene was not detectable in the mixed population, suggesting the O. rufipogon may possess a strong mechanism of exclusiveness for self-protection. (iv) The flowering time isolation and a 2-m-high cloth-screen protection were proved to be effective in reducing transgene flow. We have proposed to use a principle of classification and threshold management for different types of rice.

Limited data are available on the long-term effect an encounter with a predator has on its potential prey. Anecdotal reports from field research indicate that even unsuccessful attacks by predators on callitrichids have long-lasting effects. The subjects for this study were two groups of Geoffroy's marmosets (Callithrix geoffroyi) housed outside, off exhibit, at the Center for Reproduction of Endangered Species at the San Diego Wild Animal Park. Before they retired in the evening, the marmosets were observed under one of three conditions: snake model, cloth control, and no-stimulus control. Data were collected the following morning for 1 hr after the animals emerged from the sleeping box. Compared to control conditions, exposure to the snake model before retirement the previous evening was associated with significantly more vigilance checks (i.e., inspecting the area where the stimulus was last seen), and a delay in beginning to forage on the ground. These results suggest that callitrichids use recent threatening experiences to guide their vigilance behavior 12 hr after the threat is detected, and that they adjust their early morning behavior in response to potential predatory threats.

The rapid development of wearable electronics in recent years has brought increasing energy consumption, making it an urgent need to focus on personal energy harvesting, storage and management. Herein, a textile-based personal energy management device with multilayer-coating structure was fabricated by encapsulating commercial nylon cloth coated with silver nanowires into polydimethylsiloxane using continuous and facile dip-coating method. This multilayer-coating structure can not only harvest mechanical energy from human body motion to power wearable electronics but also save energy by keeping people warm without losing heat to surroundings and wasting energy to heat empty space and inanimate objects. Fluoroalkylsilanes (FAS) were grafted onto the surface of the film through one single dip-coating process to improve its energy harvesting performance, which has hardly adverse effect to heat insulation and Joule heating property. In the presence of FAS modification, the prepared film harvested mechanical energy to reach a maximum output power density of 2.8 W/m(2), charged commercial capacitors and lighted LEDs, showing its potential in powering wearable electronics. Furthermore, the film provided 8% more thermal insulation than normal cloth at 37 °C and efficiently heated to 40 °C within 4 min when applied the voltage of only 1.5 V due to Joule heating effect. The high flexibility and stability of the film ensures its wide and promising application in the wearable field.

The development of a sustainable route to ammonia production is one of the most attractive targets in chemistry. The primary method of ammonia production, Haber-Bosch process, can bring about excessive consumption of fossil fuels and large CO2 emission. In this communication, we develop a VN nanowire array on carbon cloth (VN/CC) as a high-performance catalyst for the nitrogen reduction reaction (NRR) under ambient conditions. Such an electrocatalyst achieves high ammonia yield (2.48 × 10-10 mol-1 s-1 cm-2) and faradaic efficiency (3.58%) at -0.3 V versus RHE in 0.1 M HCl, outperforming most reported results for N2 fixation under ambient conditions, and even comparing favorably with those obtained under high temperatures and/or pressures. This work not only provides us an attractive catalyst material for the NRR in acidic media, but would also open up an exciting new avenue to the rational design and fabrication of transition metal nitrides for the NRR.

1-(2-Pyridylazo)-2-naphthol impregnated activated carbon cloth (PAN-imp-ACC) was prepared as a solid phase sorbent and, for the first time, was used for the simultaneous separation and preconcentration of trace amounts of lead, cadmium and nickel in water, soil and sewage sludge samples prior to determination by flame atomic absorption spectrometry (FAAS). The parameters governing the efficiency of the method were optimized, including the pH, the eluent type and volume, the sample and eluent flow rates, diverse ions effects and the sample volume. A preconcentration factor of 100 was achieved for all the metal ions, with detection limits of 0.1-2.8 µg L(-1) and relative standard deviations below 6.3%. The adsorption capacity of the PAN-imp-ACC for Pb(II), Cd(II) and Ni(II) ions was found to be 45.0 mg g(-1), 45.0 mg g(-1) and 43.2 mg g(-1), respectively. The method was validated by the analysis of the certified reference materials TMDA-64.2 fortified Lake Ontario water and BCR-146R Sewage Sludge Amended Soil (Industrial Origin). The procedure was applied to determine the analytes content in real samples.

We demonstrate wafer-scale, non-contact mapping of essential carrier transport parameters, carrier mobility (µdrift), carrier density (Ns), DC sheet conductance (σdc), and carrier scattering time (τsc) in CVD graphene, using spatially resolved terahertz time-domain conductance spectroscopy. σdc and τsc are directly extracted from Drude model fits to terahertz conductance spectra obtained in each pixel of 10 × 10 cm² maps with a 400 µm step size. σdc- and τsc-maps are translated into µdrift and Ns maps through Boltzmann transport theory for graphene charge carriers and these parameters are directly compared to van der Pauw device measurements on the same wafer. The technique is compatible with all substrate materials that exhibit a reasonably low absorption coefficient for terahertz radiation. This includes many materials used for transferring CVD graphene in production facilities as well as in envisioned products, such as polymer films, glass substrates, cloth, or paper substrates.

OBJECTIVE

To assess the prevalence of presbyopia, spectacles use and spectacle correction coverage for near vision among weaving communities in Prakasam district in the South Indian state of Andhra Pradesh.

METHODS

A population based cross sectional study was conducted among a population aged ≥40 years. Distance visual acuity was assessed at 6 m. Near vision was assessed using N notation charts at a fixed distance of 40 cm. Presbyopia was defined as binocular unaided near vision <N8 and improving to ≥N8 with near addition lenses. Functional presbyopia was defined as presenting near vision <N8 and improving to ≥N8 with near addition lenses. A questionnaire was used to collect information on spectacles use. In order to calculate spectacle correction coverage for presbyopia, met presbyopia need was defined as the percentage of people who presented with presbyopia correction and achieved binocular N8 using it. Unmet presbyopia need was defined as the percentage of people who had either under corrected or uncorrected binocular near vision worse than N8 that would improve with correction to at least N8.

RESULTS

Of 2848/3000 enumerated subjects (94.0%) participated. Four hundred individuals with distance visual impairment were excluded from the analysis. Among the remaining 2448 individuals, 46% were male and 49.1% had no formal education. The mean age among males was higher compared to females (p < 0.01). Based on unaided near vision, the prevalence of presbyopia was 61.8% (95% CI: 59.9-63.7) and the prevalence of functional presbyopia was 35.1% (95% CI: 33.2-37.0). Using multivariable analysis, it was found that functional presbyopia was significantly associated with female gender, no education and lack of spectacle use. Spectacle correction coverage was 43.2%. Among the 781 individuals who had no correction at the time of examination, 122 (15.6%) subjects reported having used spectacles previously. The reasons for discontinuation of spectacles were discomfort with spectacles (n = 57; 46.7%), damaged or lost spectacles (n = 45; 36.9%), ability to see clearly even without spectacles (n = 12; 9.8%) and other reasons (n = 8; 6.6%).

CONCLUSIONS

Although the prevalence of presbyopia (61.8%) was comparable with other studies, the prevalence of functional presbyopia (35.1%) was lower and linked with higher spectacle correction coverage (43.2%) in this weaving community. However, it still highlights a large unmet need and spectacle correction coverage that could be improved by the provision of good quality, affordable spectacles, which may also improve spectacles use.

We successfully developed a simple electrophoretic deposition (EPD) method to decorate the MoSe2 nanosheets on the carbon fiber surface of carbon cloth (MoSe2/CC). With this process, MoSe2 nanosheets can be uniformly and tightly deposited on this flexible conductor to form a 3D binder-free electrode for hydrogen evolution reaction (HER). The film thickness can also be controlled by the EPD time. Directly used as binder-free electrodes for hydrogen evolution reaction, the as-prepared 3D MoSe2/CC samples exhibit excellent catalytic activity in an acidic electrolyte (21 mA/cm(2) at an over-potential of 250 mV). Variation of MoSe2 nanosheets film thickness in the electrodes could affect the catalytic activity, and it was found that the MoSe2/CC sample prepared with 60 min EPD time shows the highest HER activity amongst these different thickness samples. Moreover, stability tests though long-term potential cycles (no degradation after 1000 continuous potential cycles) and extended electrolysis confirm the exceptional durability of the catalyst. This development offers us an attractive and active 3D electrode for electrochemical water splitting.