The catalytic hydrogenation of a metal nitride to produce free ammonia using a rhodium hydride catalyst that promotes H2 activation and hydrogen atom transfer is described. The phenylimine-substituted rhodium complex, (η5-C5Me5)Rh(MePhI)H (MePhI = N-methyl-1-phenylethan-1-imine) exhibited higher thermal stability compared to the previously reported (η5-C5Me5)Rh(ppy)H (ppy = 2-phenylpyridine). DFT calculations established that the two rhodium complexes have comparable Rh-H bond dissociation free energies of 51.8 kcal mol-1 for (η5-C5Me5)Rh(MePhI)H and 51.1 kcal mol-1 for (η5-C5Me5)Rh(ppy)H. In the presence of 10 mol% of the phenylimine rhodium precatalyst and 4 atm of H2 in THF, the manganese nitride, (tBuSalen)Mn≡N underwent hydrogenation to liberate free ammonia with up to 6 total turnovers of NH3 or 18 turnovers of H·. The phenylpyridine analogue proved inactive for ammonia synthesis under identical conditions owing to competing deleterious hydride transfer chemistry. Subsequent studies showed that the use of a non-polar solvent such as benzene suppressed formation of the cationic rhodium product resulting from the hydride transfer and enabled catalytic ammonia synthesis by proton coupled electron transfer.

2-Phenylpyridine- and 2-(benzo[b]thiophen-2-yl)pyridine-based (ppy- and btp-based) o-carboranyl (Car1 and Car2) and their B(CH3)2-C∧N-chelated (Car1B and Car2B) compounds were prepared and fully characterised by multinuclear NMR spectroscopy and elemental analysis. The solid-state structure of Car2B was determined by single-crystal X-ray diffraction, which revealed a four-coordinated dimethylboryl centre. All compounds displayed major absorption bands that were assigned to π-π* transitions involving the ppy and btp moieties, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their aryl groups. Furthermore, the chelated compounds exhibited dominant low-energy absorption bands (λabs = 333 nm for Car1B and 383 nm for Car2B) resulting from the reinforcement of ICT transitions that correspond to the o-carborane moieties through the restriction of aromatic-ring free rotation. While Car1 and Car2 did not exhibit photoluminescence emissions in toluene at 298 K, Car1B and Car2B showed intense emissions, which are assignable to π-π* transitions associated with each chelated aryl group. However, Car1 and Car2 evidently emitted at around 450 nm in solution at 77 K, invoked by radiative ICT transitions between the carborane and the ppy or btp moiety, indicating that ICT-based radiative decay is only invigorated in the rigid state in the absence of structural variations, such as C-C bond fluctuations in the carborane cage and aromatic-ring free rotation. Interestingly, while Car1 in the film state exhibited a weak ICT-based emission spectrum, and Car1B and Car2B showed intense emissions originating from π-π* transitions associated with each chelated aryl group, Car2 showed significantly enhanced emissions in the same energy region as that exhibited in solution at 77 K, resulting in a much larger quantum efficiency over that in solution. DFT-optimised structures of Car1 and Car2 in their ground and the first-excited states clearly reveal that the enhanced emissive features of Car2 in the film state are strongly associated with the retained planarity of the btp moiety in both the ground and excited states. The photophysical results for these o-carboranyl compounds definitively reveal that the planarities of the aryl groups appended to the o-carborane decisively affect the efficiency of radiative decay based on ICT involving the o-carborane.

The effective capture and storage of radioactive iodine is of importance for nuclear waste storage during nuclear power station accidents. Here we report Fe3O4@PPy powder containing ∼12nm magnetite (Fe3O4) nanoparticles encapsulated in the polypyrrole (PPy) matrix. It shows 1627mg/g uptake of iodine dissolved in water, within 2h at room temperature. Fe3O4@PPy is ferromagnetic in nature and can be separated from water using external magnetic field. The nitrogen gas sweeping test at 30°C shows release of 2% iodine from iodine adsorbed Fe3O4@PPy, revealing stable storage of iodine for a moderate period. The iodine-adsorbed magnetic powder can be regenerated by washing with ethanol. The XPS spectrum of iodine adsorbed Fe3O4@PPy confirmed the presence of polyiodides (I3- and I5-) bound to the PPy surface. This excellent iodine capture and storage from iodine contaminated water is an environment friendly, inexpensive and large scale method.

Background: Limited information exists on the relation between fat emulsion structure and its effect on the release of gastrointestinal hormones and feelings of satiation.Objective: We investigated the impact of fat emulsion droplet size, gravitational and acid stability, and redispersibility on gastrointestinal responses and sought to deduce the relative importance of the hormones ghrelin, cholecystokinin, glucagon-like peptide-1, and peptide YY (PYY) in controlling fat emptying and related satiation.Methods: Within a randomized, double-blind, 4-armed crossover study, an extensive data set was generated by MRI of gastric function, analysis of hormone profiles, and ratings of satiation in healthy participants [10 women and 7 men with a mean ± SD age of 25 ± 7 y and body mass index (in kg/m2) of 22 ± 1] after intake of 4 different fat emulsions. Iterative Bayesian model averaging variable selection was used to investigate the influence of hormone profiles in controlling fat emulsion emptying and satiation.Results: The emulsion structure had a distinct effect on the gastric emptying (primary outcome), gastrointestinal hormone profiles, and ratings of satiation (secondary outcomes). Gravitational and acid stability were stronger modulators of fat emptying and hormone profiles than were emulsion droplet size or redispersibility. Cholecystokinin and PYY were most strongly affected by fat emulsion instability and droplet size. Although both hormones were relevant predictors of gastric emptying, only PYY was identified as a relevant predictor of satiation.Conclusions: This work indicates that evenly dispersed, stable, small-emulsion droplets within the stomach lead to prolonged gastric distension, longer ghrelin suppression, and accelerated fat sensing (cholecystokinin and PPY), triggering prolonged feelings of satiation. It suggests that the effects of emulsion instability and droplet size on energy consumption are best studied by assessing changes in gastric emptying and ratings of satiation rather than changes in venous hormone profiles. This trial was registered at clinicaltrials.gov as NCT01253005.

With the urgent requirement for high-performance rechargeable Li-S batteries, besides various carbon materials and metal compounds, lots of conducting polymers have been developed and used as components in Li-S batteries. In this review, the synthesis of polyaniline (PANI), polypyrrole (PPy) and polythiophene (PTh) is introduced briefly. Then, the application progress of the three conducting polymers is summarized according to the function in Li-S batteries, including coating layers, conductive hosts, sulfur-containing compounds, separator modifier/functional interlayer, binder and current collector. Finally, according to the current problems of conducting polymers, some practical strategies and potential research directions are put forward. We expect that this review will provide novel design ideas to develop conducting polymer-containing high-performance Li-S batteries.

Ultrafast luminescence spectroscopy has been undertaken on three iridium cored phosphorescent complexes, with the Ir(ppy)3 molecule being compared with two Ir(ppy)3 cored dendrimers. Energy dissipation by intramolecular vibrational redistribution (IVR) and cooling shows as a luminescence decay because it decreases the admixture of singlet character to the emitting triplet state. A larger amount of vibrational energy dissipates by IVR in dendrimer complexes. We have therefore found a methodology of obtaining unambiguous information on the IVR process and show its potential to study IVR rates as a function of vibrational energy.

Cisplatin and its analogs have been used for the treatment of various cancers, but their serious side effect has limited clinical application. Presently, scientists are developing other metal drugs as an alternative of cisplatin. In this paper, three new iridium(III) complexes [Ir(ppy)₂(adppz)](PF₆) (adppz = 7-aminodipyrido[3,2-a:2',3'-c]phenazine; ppy = 2-phenylpyridine 1), [Ir(bzq)₂(adppz)](PF₆) (bzq = benzo[h]quinolone 2) and [Ir(piq)₂(adppz)](PF₆) (piq = 1-phenylisoquinoline 3) were synthesized and characterized. The complexes can effectively inhibit the cell colonies. The cytotoxicity in vitro of the complexes against A549, HepG2, SGC-7901, BEL-7402 and normal NIH3T3 cells was evaluated by 3-(4,5-dimethylthiazole)-2,5-diphenyltetraazolium bromide (MTT) methods. The intracellular reactive oxygen species (ROS) levels and Ca²⁺ concentrations were assayed. The mitochondrial membrane potential, a release of cytochrome c and the expression of B-cell lymphoma/leukemia-2 (Bcl-2) family protein have been investigated. The data reveal that the complexes 1-3 can effectively inhibit the cell proliferation in A549 cells with low IC₅₀ value of 3.2 ± 0.4 μM, 4.8 ± 0.5 μM and 1.2 ± 0.2 μM, respectively. The antitumor in vivo shows that complex 3 can inhibit tumor growth with an inhibitory rate of 76.34%. The studies on the mechanism indicate that these complexes cause apoptosis in A549 cell via a ROS-mediated lysosomal-mitochondrial dysfunction pathway. In addition, the interaction of the complexes with BSA was explored.

Three iridium(III) complexes [Ir(ppy)₂(CPIP)](PF₆) (Ir-1, ppy = 2-phenylpyridine, CPIP = 2-(4-chlorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline), [Ir(ppy)₂(DCPIP)](PF₆) (Ir-2, DCPIP = 2-(3,4-dichlorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline) and [Ir(ppy)₂(TCPIP)](PF₆) (Ir-3, TCPIP = 2,3,5-trichlorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline) were synthesized and characterized. The complexes Ir-1, Ir-2 and Ir-3 were encapsulated in liposomes to form Ir-1-Lipo, Ir-2-Lipo and Ir-3-Lipo. Morphology, size distribution, and zeta potential of liposomes were examined by transmission electron microscopy (TEM) and Zetasizer. The cytotoxic activity in vitro of Ir-1, Ir-2 and Ir-3 against cancer A549, HTC-116, HepG2, BEL-7402, Eca-109, B16, HeLa SGC-7901 and normal NIH3T3 cells was evaluated by 3-(4,5-dimethylthiazole-2-yl)-2,5-biphenyl tetrazolium bromide (MTT) method. Ir-2 and Ir-3 show no cytotoxic activity against the selected cancer cells, and Ir-1 displays moderate cytotoxic effect on the cell growth in A549 cells. However, Ir-1, Ir-2 and Ir-3 were encapsulated in liposomes, the cytotoxic activity was greatly enhanced. In particular, Ir-1-Lipo and Ir-2-Lipo can effectively inhibit the cell growth in A549 cells with a low IC₅₀ value of 3.1 ± 0.3 and 1.2 ± 0.4 μM. The apoptosis was assayed by flow cytometry. Ir-1, Ir-2 and Ir-3 reveal weak apoptotic effect, whereas Ir-1-Lipo, Ir-2-Lipo and Ir-3-Lipo induce an apoptotic percentage of 55.6%, 69.3% and 16.7% in A549 cells, respectively. Specially, in the assay of antitumor activity in vivo, the inhibiting percentage of tumor growth induced by Ir-2 is 27.65%, while inhibiting percentage of tumor growth caused by Ir-2-Lipo is 57.45%. Obviously, the liposomes can enhance anticancer activity in vitro and in vivo compared with the complexes. The results show that the iridium(III) complexes encapsulated liposomes induce apoptosis in A549 cells through ROS-mediated lysosome-mitochondria dysfunction pathway and target the microtubules.

Hypoxia evokes a regulated decrease in the body core temperature (Tc) in a variety of animals. The neuronal mechanisms of this response include, at least in part, glutamatergic activation in the lateral preoptic area (LPO) of the hypothalamus. As the sympathetic premotor neurons in the medulla oblongata constitute a cardinal relay station in the descending neuronal pathway from the hypothalamus for thermoregulation, their inhibition can also be critically involved in the mechanisms of the hypoxia-induced hypothermia. Here, I examined the hypothesis that hypoxia-induced hypothermia is mediated by glutamate-responsive neurons in the LPO that activate GABAergic transmission in the rostral raphe pallidus (rRPa) and neighboring parapyramidal region (PPy) of the medulla oblongata in urethane-chloralose-anesthetized, neuromuscularly blocked, artificially ventilated rats. Unilateral microinjection of GABA (15nmol) into the rRPa and PPy regions elicited a prompt increase in tail skin temperature (Ts) and decreases in Tc, oxygen consumption rate (VO2), and heart rate. Next, when the GABAA receptor blocker bicuculline methiodide (bicuculline methiodide (BMI), 10pmol) alone was microinjected into the rRPa, it elicited unexpected contradictory responses: simultaneous increases in Ts, VO2 and heart rate and a decrease in Tc. Then, when BMI was microinjected bilaterally into the PPy, no direct effect on Ts was seen; and thermogenic and tachycardic responses were slight. However, pretreatment of the PPy with BMI, but not vehicle saline, greatly attenuated the hypothermic responses evoked by hypoxic (10%O2-90%N2, 5min) ventilation or bilateral microinjections of glutamate (5nmol, each side) into the LPO. The results suggest that hypoxia-induced hypothermia was mediated, at least in part, by the activation of GABAA receptors in the PPy.

Two iridium(III) polypyridyl complexes [Ir(ppy)₂(HPIP)](PF₆) (Ir-1), [Ir(ppy)₂(BHPIP)](PF₆) (Ir-2) and their liposomes Ir-1-Lipo and Ir-2-Lipo were synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR. The anticancer activity in vitro and in vivo was evaluated. The cytotoxic activity in vitro of the complexes and their liposomes Ir-1-Lipo and Ir-2-Lipo against cancer cells was investigated by MTT methods. Ir-1 and Ir-2 show no cytotoxic activity, while Ir-1-Lipo and Ir-2-Lipo exhibit high cytotoxic effect. The IC₅₀ values range from 5.2 ± 0.8 to 22.3 ± 1.8 μM. The apoptosis, reactive oxygen species, the change of mitochondrial membrane potential, intracellular Ca²⁺ levels and a release of cytochrome c were investigated. The effect of Ir-1-Lipo and Ir-2-Lipo on microtubules was also explored. In the C57BL/6 mice model, Ir-1 only displays a tumor inhibitory rate of 23.21%, while lr-1-Lipo exhibits satisfactory in vivo antitumor efficacy with tumor inhibitory rate of 72.55%. This study demonstrates that complexes encapsulated in liposomes induce apoptosis in B16 through ROS-mediated lysosomal-mitochondria dysfunction, inhibition of polymerization of microtubules and induce cell cycle arrest at S phase.

Converting solar energy into concentrated heat is very appealing for various applications. Polypyrrole (PPy) is known to possess excellent photothermal property with low thermal conductivity, and thus is an ideal candidate for solar-thermal energy conversion. However, solar-thermal materials based on PPy or other conducting polymers still exhibit limited energy conversion efficiency due to the lack of effective light-trapping schemes. Here, it is demonstrated that multilayer PPy nanosheets with spontaneously formed surface structures such as wrinkles and ridges via sequential polymerization on paper substrates can dramatically enhance broadband and wide-angle light absorption across the full solar spectrum, leading to an impressive solar-thermal conversion efficiency of 95.33%. The intriguing solar-thermal properties and structural features of multilayer PPy nanosheets can be used for solar heating and photoactuators. Meanwhile, when used for solar steam generation, the measured efficiency could achieve ≈92% under one sun irradiation. The hierarchically multilayer structure is mechanically flexible and robust, holding great potential for practical solar energy utilization. This study provides a simple and straightforward approach toward engineering light-weight and thermally insulating polymers into efficient solar-thermal materials for emerging solar energy-related applications.

Theranostic materials are of great significance to a personalized precise medicine. However, conventional theranostic agents are mainly fabricated by combining presynthesized independent imaging probes and therapeutic agents, suffering from multiple synthesis procedures, poor morphological control, and time/reagent-consuming process. Herein, iodinated polypyrrole (I-PPy) nanoparticles are fabricated via a one-step synthesis strategy combining chemical oxidation and iodination for computed tomography (CT) imaging-guided photothermal therapy. Iodic acid with a high standard electrode potential enables the chemical oxidation polymerization of pyrrole monomers. Meanwhile, the iodination of PPy induced by the corresponding reduction product I2 takes place during the polymerization process to generate I-PPy nanoparticles. The prepared I-PPy nanoparticles possess a uniform size, excellent colloidal stability, intense near-infrared absorption, strong X-ray attenuation ability, and favorable biocompatibility. The as-synthesized I-PPy nanoparticles not only guarantee remarkable contrast-enhanced CT imaging of blood pool and tumors, but also realize effective tumor suppression in vitro and in vivo by I-PPy nanoparticles-mediated CT imaging-guided photothermal therapy. To the best of the authors' knowledge, it is the first time that multifunctional PPy nanoparticles are fabricated through a one-step synthesis process. The proposed strategy opens up a new way for the fabrication of high-performance theranostic agents via a one-step strategy under mild conditions.

The geometries, electronic structures, and spectroscopic properties of a series of novel cationic iridium(III) complexes [trans-(C/N)(2)Ir(PH(3))(2)]+ (C/N = 2-phenylpyridine, 1; benzoquinoline, 2; 1-phenylpytazolato, 3; 2-(4,6-difluorophenyl)pyridimato, 4) were investigated theoretically. The ground- and excited-state geometries were optimized at the B3LYP/LANL2DZ and CIS/LANL2DZ levels, respectively. The optimized geometry structural parameters agree well with the corresponding experimental results. The unoccupied molecular orbitals are dominantly localized on the C/N ligand, while the occupied molecular orbitals are composed of Ir atom and C/N ligand. Under the time-dependent density functional theory (TDDFT) level with the polarized continuum model (PCM) model, the absorption and phosphorescence in acetonitrile (MeCN) media were calculated based on the optimized ground- and excited-state geometries, respectively. The calculated results showed that the lowest-lying absorptions at 364 nm (1), 389 nm (2), 317 nm (3), and 344 nm (4) are all attributed to a {[d(yz)(Ir) + pi(C/N)] ->> [pi*(C/N)]} transition with metal-to-ligand and intraligand charge transfer (MLCT/ILCT) characters; moreover, the phosphorescence at 460 (1) and 442 nm (4) originates from the 3{[d(yz)(Ir) + pi(C/N)] [pi*(C/N)]} (3)MLCT/(3)ILCT excited state, while that at 505 (2) and 399 nm (3) can be described as originating from different types of (3)MLCT/(3)ILCT excited state (3){[d(xy)(Ir) + pi(C/N)] [pi*(C/N)]}. The calculated results also revealed that the absorption and emission transition character can be altered by adjusting the pi electron-withdrawing groups and, furthermore, suggested that the phosphorescent color can be tuned by changing the pi-conjugation effect of the C/N ligand.

A tetra-nickel-containing polyoxotungstate, Na6K4[Ni4(H2O)2(PW9O34)2]·32H2O (Na6K4-Ni4P2), has been synthesized in high yield and systematically characterized. The X-ray crystal structure confirms that a tetra-nickel cluster core [Ni4O14] is sandwiched by two trivacant, heptadentate [PW9O34](9-) POM ligands. When coupled with (4,4'-di-tert-butyl-2,2'-dipyridyl)-bis(2-phenylpyridine(1H))-iridium(III) hexafluorophosphate [Ir(ppy)2(dtbbpy)][PF6] as photosensitizer and triethanolamine (TEOA) as sacrificial electron donor, the noble-metal-free complex Ni4P2 works as an efficient and robust molecular catalyst for H2 production upon visible light irradiation. Under minimally optimized conditions, Ni4P2 catalyzes H2 production over 1 week and achieves a turnover number (TON) of as high as 6500 with almost no loss in activity. Mechanistic studies (emission quenching, time-resolved fluorescence decay, and transient absorption spectroscopy) confirm that, under visible light irradiation, the excited state [Ir(ppy)2(dtbbpy)](+)* can be both oxidatively and reductively quenched by Ni4P2 and TEOA, respectively. Extensive stability studies (e.g., UV-vis absorption, FT-IR, mercury-poison test, dynamic light scattering (DLS) and transmission electron microscopy (TEM)) provide very strong evidence that Ni4P2 catalyst remains homogeneous and intact under turnover conditions.

Either as salts or room temperature ionic liquids, fluorinated anion-based electrolytes have been a common choice for ionic electroactive polymer actuators, both linear and bending. In the present work, propylene carbonate solutions of four electrolytes of the three hugely popular anions-triflouromethanesulfonate, bis(trifluoromethane)sulfonimide, and hexafluorophosphate were compared and evaluated in polypyrrole linear actuators. The actuation direction, the characteristics-performance relations influence the behavior of the actuators. Isotonic Electro-chemo-mechanical deformation (ECMD) measurements were performed to study the response of the PPy/DBS samples. The highest strain for pristine PPy/DBS linear actuators was found in range of 21% for LiTFSI, while TBAPF₆ had the least cation involvement, suggesting the potential for application in durable and controllable actuators. Interesting cation effects on the actuation of the same anions (CF₃SO₃^-) were also observed.

The synthesis of novel, monocationic iridium(III) photosensitisers (Ir-PSs) with the general formula [Ir(III)(C^N)(2)(N^N)](+) (C^N: cyclometallating phenylpyridine ligand, N^N: neutral bidentate ligand) is described. The structures obtained were examined by cyclic voltammetry, UV/Vis and photoluminescence spectroscopy and X-ray analysis. All iridium complexes were tested for their ability as photosensitisers to promote homogeneously catalysed hydrogen generation from water. In the presence of [HNEt(3)][HFe(3)(CO)(11)] as a water-reduction catalyst (WRC) and triethylamine as a sacrificial reductant (SR), seven of the new iridium complexes showed activity. [Ir(6-iPr-bpy)(ppy)(2)]PF(6) (bpy: 2,2'-bipyridine, ppy: 2-phenylpyridine) turned out to be the most efficient photosensitiser. This complex was also tested in combination with other WRCs based on rhodium, platinum, cobalt and manganese. In all cases, significant hydrogen evolution took place. Maximum turnover numbers of 4550 for this Ir-PS and 2770 for the Fe WRC generated in situ from [HNEt(3)][HFe(3)(CO)(11)] and tris[3,5-bis(trifluoromethyl)phenyl]phosphine was obtained. These are the highest overall efficiencies for any Ir/Fe water-reduction system reported to date. The incident photon to hydrogen yield reaches 16.4% with the best system.

Manganese cobaltite nanorods (MnCo2O4 NRs) were prepared and tested as potential air-cathode catalyst for the single-chambered microbial fuel cells (sMFC). The power generation of sMFC increases with MnCo2O4 NRs loading to the cathode. The Polypyrrole (PPy) and Vulcan XC were used as conducting support to the MnCo2O4 NRs to form composites either by in situ or by mechanical mixing in the cathode fabrication. The cyclic voltammetry, linear sweep voltammetry and electrochemical impedance studies reveal that the in situ-MnCo2O4 NRs/PPy composite has higher catalytic activity than that of mechanically mixed-MnCo2O4NRs/PPy composite because of higher interfacial contact between MnCo2O4 NRs and PPy. The maximum volumetric power density with in situ-MnCo2O4 NRs/PPy, mechanically mixed-MnCo2O4 NRs/PPy, MnCo2O4 NRs/Vulcan XC and catalyst-free (only Vulcan XC) cathode was measured to be 6.11, 5.05, 4.22, and 1.77 W/m(3), respectively, in the sMFC. This suggests that PPy is not only a better conducting support than that of conventionally used Vulcan XC but also the cathode composite fabrication process is important for enhanced performance. The synergetic effect of MnCo2O4 NRs and PPy was found to play an important role for the improved energy recovery and it could be applied as an efficient and inexpensive cathode catalyst for the sMFC.

We constructed a highly responsive ascorbic acid (AA) sensor utilizing over-oxidized polypyrrole (OPPy) and Palladium nanoparticles (PdNPs) composites (OPPy-PdNPs). In the presence of PdNPs, polypyrrole (PPy) was coated on a gold (Au) electrode through cyclic voltammetry (CV) and over-oxidized at a fixed potential in NaOH solution. The PdNPs were characterized using ultraviolet-visible (UV-vis) spectrum and transmission electron microscopy (TEM). The surface of OPPy-PdNPs on the Au electrode was investigated using field-emission scanning electron microscopy (FE-SEM). Results revealed that the OPPy-PdNPs-modified Au electrode (OPPy-PdNPs/Au) has the capacity to catalyze the oxidation of AA by lowering its oxidation potential to 0 V. The OPPy-PdNPs/Au electrode exhibited 2 different linear concentration ranges. In the low concentration range (1-520 μM), OPPy-PdNPs/Au exhibited a direct linear relation with current responses and had high sensitivity (570 μA mM(-1)cm(-2)) and a high correlation coefficient (0.995). In contrast, in the higher concentration range (120-1600 μM), the relationship between current responses and concentration of AA can be represented by a two-parameter sigmoidal equation. In addition, the sensor exhibited a short response time (less than 2s) and a very low limit of detection of 1 μM. The electrochemical AA sensor constructed in this study was simple, inexpensive, reproducible, sensitive, and resistant to interference. Thus, the proposed sensor has great potential for detecting AA in complex biosystems and can be applied in various fields, particularly neuroscience.

Conducting polymers-based gas sensors have attracted increasing research attention these years. The introduction of inorganic sensitizers (noble metals or inorganic semiconductors) within the conducting polymers-based gas sensors has been regarded as the generally effective route for further enhanced sensors. Here we demonstrate a novel route for highly-efficient conducting polymers-based gas sensors by introduction of polymeric sensitizers (polymeric adsorbent) within the conducting polymeric nanostructures to form one-dimensional polymeric adsorbent/conducting polymer core-shell nanocomposites, via electrospinning and solution-phase polymerization. The adsorption effect of the SPEEK toward NH₃ can facilitate the mass diffusion of NH₃ through the PPy layers, resulting in the enhanced sensing signals. On the basis of the SPEEK/PPy nanofibers, the sensors exhibit large gas responses, even when exposed to very low concentration of NH₃ (20 ppb) at room temperature.

Highly orientated polypyrrole (PPy)-coated polyacrylonitrile (PAN) (PPy-PAN) nanofiber yarn was prepared with an electrospinning technique and in-situ chemical polymerization. The morphology and chemical structure of PPy-PAN nanofiber yarn was characterized by scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and fourier transform infrared spectroscopy (FTIR), which indicated that the PPy as the shell layer was homogeneously and uniformly polymerized on the surface of PAN nanofiber. The effects of different concentration of doping acid on the responses of PPy-PAN nanofiber yarn sensor were investigated. The electrical responses of the gas sensor based on the PPy-PAN nanofiber yarn to ammonia were investigated at room temperature. The nanoyarn sensor composed of uniaxially aligned PPy-PAN nanofibers with a one-dimensional structure exhibited a transient response, and the response time was less than 1 s. The excellent sensing properties mentioned above give rise to good potential application prospects in the field of ammonia sensor.

In order to improve the gas sensing properties, hydroxyapatite (HAp)-based composites were prepared by mixing with different contents of conductive polymers: polypyrrole (PPy) and polyaniline (PAni). The compositions, microstructures and phase constitutions of polymer/HAp composites were characterized, and the sensing properties were studied using a chemical gas sensing (CGS-8) system. The results showed that, compared to pure HAp, the sensitivities of the composites to ammonia were improved significantly. 5%PPy/HAp and 20%PAni/HAp composites exhibited the best sensitivities to ammonia, and the sensitivities at 500ppm were 86.72% and 86.18%, respectively. Besides, the sensitivity of 5%PPy/HAp at 1000ppm was up to 90.7%. Compared to pure PPy and PAni, the response and the recovery time of 5%PPy/HAp and 20%PAni/HAp at 200ppm were shortened several times, and they were 24s/245s and 15s/54s, respectively. In addition, the composites showed a very high selectivity to ammonia. The mechanism for the enhancement of the sensitivity to ammonia was also discussed. The polymer/HAp composites are very promising in applications of ammonia sensors.

We measure the surface stress induced by electrochemical transformations of a thin conducting polymer film. One side of a micromechanical cantilever-based sensor is covered with an electropolymerized dodecyl benzenesulfonate-doped polypyrrole (PPyDBS) film. The microcantilever serves as both the working electrode (in a conventional three-electrode cell configuration) and as the mechanical transducer for simultaneous, in situ, and real-time measurements of the current and interfacial stress changes. A compressive change in surface stress of about -2 N/m is observed when the conducting polymer is electrochemically switched between its oxidized (PPy+) and neutral (PPyPPy(DBS) films in both surfactant and halide-based electrolytes is also discussed. We have identified two main competing origins of surface stress acting on the PPy(DBS)/ gold-coated microcantilever: one purely mechanical due to the volume change of the conducting polymer, and a second charge-induced, owing to the interaction of anions of the supporting electrolyte with the gold surface.

Conducting polymers (CPs) have attracted a great deal of attention due to their unique properties; these properties are useful in implementing various functional devices, such as memory, and chemical and biological sensors. In particular, the nanopatterning of CPs is a key technology that will accelerate the adoption of CPs in fabricating nanoscaled multifunctional devices. This paper presents an innovative technique for forming polypyrrole nanowire (PPy-NW) patterns, without any additional pretreatment on the gold surface, using atomic force microscopy (AFM) and ultra-short pulse voltage. Applying the ultra-short pulse voltage to the AFM tip has the following advantage: since the electrochemical current is extremely localized around the tip, the successful formation of CP nanowires results. This is because the pulse width is much shorter than the resistor-capacitor (RC) time constant of the equivalent electrochemical circuit of our experimental set-up. This paper provides systematic results regarding the dimensional variation of the PPy-NW patterns produced by varying the electrical conditions of the ultra-short pulse, such as the pulse amplitude, width, and frequency. The results show that use of an ultra-short pulse is essential in fabricating PPy-NW patterns. Additionally, an ultra-short pulse offers excellent pattern controllability for both width (353 nm ∼ 3.37 µm) and height (2.0 ∼ 88.3 nm).

An enzymeless glucose biosensor based on polypyrrole nanofibers-supporting Au nanoparticles (Au/PPyNFs) was investigated in this study. The Au/PPyNFs heterogeneous composite materials were synthesized in-situ via hydrogen bonding interactions for the assembly of polyethyleneimine (PEI) on the surface of polypyrrole nanofibers (PPyNFs). By changing the molar ratio of PPy to HAuCl(4), Au/PPyNFs with different Au loadings were obtained. The morphology and composition of Au/PPyNFs were characterized using SEM, TEM, FTIR, XRD and XPS, respectively. The hybrids exhibited a high electrocatalytic activity toward glucose oxidation, which is prerequisite for the catalysts to be applied in amperometric glucose sensors. By using the nonenzymatic glucose sensor based on Au/PPyNFs, 0.2-13 mM glucose can be detected with a sensitivity of 1.003 μA cm(-2)mM(-1) and a good linearity (R(2)=0.9993) between current density and glucose concentration. The proposed glucose sensor provides a promising strategy to construct fast, sensitive, and anti-interfering amperometric sensors for early diagnosis and prevention of diabetes.