Mesenchymal stem cells derived extracellular vesicles (MSC-EV), containing proteins or miRNAs，possessing various biological activity and low immunogenicity, are considered promising for surface modification of bone grafts. However, the modification efficiency is not satisfied yet, resulting in compromised therapy effects. Here, we report a novel immobilized method by self-assembling biotinylated MSC-EVs to the surface of biotin doped polypyrrole titanium (Bio-Ppy-Ti) to improve its biofunctions in vitro and in vivo. Using this method, the amount of human adipose derived stem cells-EVs (hASC- EVs) anchored onto the Bio-Ppy-Ti surface was 185-fold higher than that of pure Ti after ultrasonic concussion for 30s and remained stable on the Bio-Ppy-Ti surface for 14 days at 4 ℃. Comparing to pristine Ti, EV-Bio-Ppy-Ti exhibited enhanced cell compatibility and osteo-inductivity for osteoblasts in vitro, and anti-apoptosis ability in ectopic bone formation mode. Gene chip analysis further demonstrated that several osteo-inductive miRNAs were encapsulated in hASC-EVs, which may explain the high bone regeneration ability of EV-Bio-Ppy-Ti. Thus, this MSC-EV biotin-immobilized method appears to be highly efficient and long-term stable for bone graft`s bioactive modification, demonstrating its potential for clinical metal implants.

Polypyrrole (Ppy) has been shown to be a superior matrix for fluorescence detection based immunosensors: (i) the fluorescence of polypyrrole and polypyrrole modified by entrapped proteins was almost not detectable when this polymer was excited by near UV 325 nm light; (ii) polypyrrole quenched the fluorescence of such fluorescence agents as fluoresceine 5(6)-isothiocyanate, rhodamine B and enzyme-horseradish peroxidase (HRP) by almost 100% if they were deposited in the solution as a drop at the Ppy surface followed by evaporation of the solvent. According to our knowledge, this work is first application of Ppy in the design of a fluorescence-based immunosensor, where low Ppy fluorescence background and Ppy induced fluorescence quenching were exploited. These sensors were devoted to the detection of antibodies against bovine leukemia virus (BLV) protein gp51 (anti-gp51-Ab). A biological recognition system of this fluorescence immunosensor model was based on polypyrrole with entrapped BLV proteins gp51 (gp51/Ppy). This gp51/Ppy layer was applied for the detection of anti-gp51-Ab. Secondary antibodies against anti-gp51-Ab labeled with HRP (Ab*) were applied as fluorescence-detectable labels that are able to recognize specifically and interact with the complex of gp51 proteins and anti-gp51-Ab antibodies (gp51/anti-gp51-Ab). It was demonstrated that fluorescence of non-specifically adsorbed Ab* was almost completely quenched by the Ppy substrate. In addition, enzymatic activity of HRP was exploited as a traditional reference method for verification of the formation of the immune complex gp51/anti-gp51-Ab/Ab*.

An interdigitated immunosensor for Cystatin C detection based on polypyrrole/carbon nanotube electrochemical capacitor is described. Cystatin C (CysC) is powerful biomarker for early acute renal failure and one predictive for cardiovascular risk, sepsis, cancer and death. Recently, electrochemical immunosensors based on interdigitated electrodes (IDE) have been successfully focused on development of point-of-care testing, due to their miniaturization facilities and higher sensitivity as compared with the screen-printed electrochemical sensing. Herein, a polypyrrole/carbon nanotube nanoyhibrid film was grafted on two gold fingers by electropolymerization obtaining a supercapacitor. Anti-CysC antibodies were immobilized on the IDE by covalent entrapment via ethylenediamine bifunctional agent, followed by glycine blocking in acid and alkaline medium. Under low frequency, capacitive effect of antigen-antibody interaction were observed by double layer capacitance, and analytical responses of this IDE immunosensor to CysC serum were obtained by changes on phase angle a linear range up to 300 ng/mL. The cutoff was calculated for serum samples showing a total reducing of non-specific binding at approximately 28 ng/mL CysC. This immunosensor based on interdigitated electrode (IDE) is a potential tools as portable device,with possibility to use as a practical and rapid test for CysC diagnostic in samples of serum.

Visible light-driven reduction of imines to enantioenriched amines in aqueous solution is demonstrated for the first time. Excitation of a new water-soluble variant of the widely used [Ir(ppy)3] (ppy = 2-phenylpyridine) photosensitizer in the presence of a cyclic imine affords a highly reactive α-amino alkyl radical that is intercepted by hydrogen atom transfer (HAT) from ascorbate or thiol donors to afford the corresponding amine. The enzyme monoamine oxidase (MAO-N-9) selectively catalyzes the oxidation of one of the enantiomers to the corresponding imine. Upon combining the photoredox and biocatalytic processes under continuous photo-irradiation, enantioenriched amines are obtained in excellent yields. To the best of our knowledge, this is the first demonstration of a concurrent photoredox- and enzymatic catalysis leading to a light-driven asymmetric synthesis of amines.

A selective excitation of [Ir(df-ppy)2(pic)] and [Ru(bpy)3]2+ through tuning the electrode potential is reported in this work. Bidirectional color change from blue-green to red could be observed along with increase and decrease of the potential, which was ascribed to the dual-potential excitation property of [Ir(df-ppy)2(pic)]. Similar to the three-electrode system, selective excitation of ECL could be achieved at the anode of the bipolar electrode (BPE). Both increase and decrease of the faradic reactions at the cathode of the BPE could induce ECL reporting color at the other pole switched from blue-green to red. We applied a closed BPE device for the bioanalysis of multicolor ECL since the organic solvent containing electrochemiluminophores could be separated from the bioanalytes. On the basis of BPE arrays coupled with the ECL switch, the detection of three biomarkers of prostate cancer, PSA, microRNA-141, and sarcosine were integrated in a same device. The cutoff values of the biomarkers could be recognized directly by the naked eye. Such a device holds great potential in the early diagnosis of prostate cancer.

Titanium and titanium alloys have been widely used in orthopedics and related fields. However, their clinical applications are limited due to the lack of anti-infection, osteoinductivity and angiogenic ability. In the present study, we utilized pulse electrochemical deposition method to prepare polypyrrole (PPy) by the in-situ oxidative polymerization of pyrrole (Py), and through the coordination and doping of ions, the function of PPy as a dual regulator of hydroxyapatite nanoparticles (HA-NPs) and zinc oxide nanoparticles (ZnO-NPs) was achieved. Bioactivity test showed that the composite coating could induce the formation of apatite, and the apatite was in a neat arrangement preferentially grew along the (002) crystal plane, indicating good bioactivity. The release test showed that the dual regulation effect of PPy coordination and doping reduced the release rate of Ca²⁺ and Zn²⁺ from the composite coating. Antibacterial tests showed that the composite coating against Escherichia coli and Staphylococcus aureus. Besides, bone marrow-derived mesenchymal stem cells (BMSCs) exhibited good adhesion, proliferation and differentiation on the composite coating, and fluorescence staining experiments demonstrated good osteoinductivity of the composite coating. In this study, a multifunctional composite coating with anti-infection, angiogenic and osteoinductivity was successfully constructed on the titanium surface via pulse electrochemical deposition method.

Specific targeted drug delivery and controllable release of drugs at tumor regions are two of the main challenges for hepatocellular carcinoma (HCC) therapy, particularly post metastasis. Herein, we present a platelet membrane-facilitated local chemo-photothermal therapy strategy, in which polypyrrole (PPy) nanoparticles act as photothermal agents and along with antitumor drug doxorubicin (DOX) are encapsulated into platelet membranes (PLT-PPy-DOX). The particles are endowed with immune evasiveness and tumor targeting abilities from platelet membranes, and are then intravenously injected into an orthotopic mouse model of HCC. As expected, the PLT-PPy-DOX nanoplatforms were abundant in the tumor tissues. Hyperthermia was generated under laser irradiation (808 nm) not only to ablate tumor cells directly but also to increase the triggered release of DOX. This combination of local chemotherapy and photothermal therapy demonstrated excellent antitumor efficiency in suppressing primary tumor growth and inhibiting tumor metastases. This localized therapy which adopts biocompatible natural cell membranes and good biodegradable organic photothermal agents may provide new insights into designing biomimetic nano-vehicles for personalized therapy of HCC.

A new fluorescence micromotors-based immunoassay (FMIm) has been developed for procalcitonin (PCT) determination as an early sepsis diagnostic analytical tool. The micromotors combine the high binding capacity of the specific antibod-ies onto their polymeric polypyrrol (PPy) outer layer, with their magnetic guidance (Ni layer) and self-propulsion by catalytic generation of oxygen bubbles (PtNPs inner layer), to actively recognize the PCT antigen. This FMIm allowed a sensitive (LOD = 0.07 ng mL-1) and direct PCT determination in clinical samples from very low birth weight infants (VLBWI) with sepsis suspicion, using small volumes of sample (25 µL) in a clinically relevant range of concentrations (0.5 - 150 ng mL-1). The good agreement between PCT levels obtained by our micromotor-based method and routine im-munofluorescence Hospital determination, demonstrates the feasibility for the analysis in VLBWI samples and its poten-tial as point-of-care diagnostic tool for sepsis.

Dermatology supplements, often marketed as “skin, hair, and nail” supplements, are becoming increasingly popular. However, many consumers lack an understanding of the science of dietary supplements or the specifics of the supplement industry. While certain supplements at the right dose in the right population may prove beneficial, the evidence is sparse for many supplements. In addition, the use of some supplements has resulted in serious adverse effects. From a regulatory standpoint, the US FDA recognizes dietary supplements as foods. This distinction has multiple ramifications, including the fact that manufacturers do not need to prove efficacy, safety, or quality prior to sale. Therefore, physicians and consumers must evaluate each supplement ingredient and formulation individually. This article outlines an evidence-based approach to assess dermatology supplements. As a starting point, all supplements should be evaluated for PPIES: purity, potency, interactions, efficacy, and safety.

A bioinspired active anode with a suction effect is demonstrated for microbial fuel cells by constructing polypyrrole (PPy) nanotubular arrays on carbon textiles. The oxygen in the inner space of the nanosucker can be depleted by micro-organisms with the capability of facul-tative respiration, forming a vacuum, which then activates the electrode to draw the microorganism by suction and thus improve the bioelectricity generation.

Improvement of the stability of blue phosphorescent dopant material is one of the key factors for real application of organic light-emitting diodes (OLEDs). In this study, we found that the intramolecular hydrogen bonding in an ancillary ligand from a heteroleptic Ir(III) complex can play an important role in the stability of blue phosphorescence. To rationalize the role of intramolecular hydrogen bonding, a series of Ir(III) complexes is designed and prepared: Ir(dfppy)2(pic-OH) (1a), Ir(dfppy)2(pic-OMe) (1b), Ir(ppy)2(pic-OH) (2a), and Ir(ppy)2(pic-OMe) (2b). The emission lifetime of Ir(dfppy)2(pic-OH) (1a) (τem = 3.19 μs) in dichloromethane solution was found to be significantly longer than that of Ir(dfppy)2(pic-OMe) (1b) (τem = 0.94 μs), because of a substantial difference in the nonradiative decay rate (knr = 0.28 × 10(5) s(-1) for (1a) vs 2.99 × 10(5) s(-1) for (1b)). These results were attributed to the intramolecular OH···O═C hydrogen bond of the 3-hydroxy-picolinato ligand. Finally, device lifetime was significantly improved when 1a was used as the dopant compared to FIrpic, a well-known blue dopant. Device III (1a as dopant) achieved an operational lifetime of 34.3 h for an initial luminance of 400 nits compared to that of device IV (FIrpic as dopant), a value of 20.1 h, indicating that the intramolecular hydrogen bond in ancillary ligand is playing an important role in device stability.

We report about the development and implementation of a new setup for time-resolved X-ray absorption fine structure spectroscopy at beamline P11 utilizing the outstanding source properties of the low-emittance PETRA III synchrotron storage ring in Hamburg. Using a high intensity micrometer-sized X-ray beam in combination with two positional feedback systems, measurements were performed on the transition metal complex fac-Tris[2-phenylpyridinato-C2,N]iridium(III) also referred to as fac-Ir(ppy)3. This compound is a representative of the phosphorescent iridium(III) complexes, which play an important role in organic light emitting diode (OLED) technology. The experiment could directly prove the anticipated photoinduced charge transfer reaction. Our results further reveal that the temporal resolution of the experiment is limited by the PETRA III X-ray bunch length of ∼103 ps full width at half maximum (FWHM).

An obvious enhanced phosphorescence emission in the solid state (EPESS) was observed for two iridium(III) complexes with restricted (even fixed) intramolecular rotational motion, which is contrary to the opinion ("restricted intramolecular rotational motion as the origin of EPESS") of Park et al., and our observation confirmed that the pi-pi stacking of adjacent pyridyl rings of ppy ligands played a key role in EPESS.

Minimization of stress-induced mechanical rupture and delamination of conducting polymer (CP) films is desirable to prevent failure of devices based on these materials. Thus, precise in situ measurement of voltage-induced stress within these films should provide insight into the cause of these failure mechanisms. The evolution of stress in films of polypyrrole (pPy), doped with indigo carmine (IC), was measured in different electrochemical environments using the multibeam optical stress sensor (MOSS) technique. The stress in these films gradually increases to a constant value during voltage cycling, revealing an initial break-in period for CP films. The nature of the ions involved in charge compensation of pPy[IC] during voltage cycling was determined from electrochemical quartz crystal microbalance (EQCM) data. The magnitude of the voltage-induced stress within pPy[IC] at neutral pH correlated with the radius of the hydrated mobile ion in the order Li(+)>> Na(+)>> K(+). At acidic pH, the IC dopant in pPy[IC] undergoes reversible oxidation and reduction within the range of potentials investigated, providing a secondary contribution to the observed voltage-induced stress. We report on the novel stress response of these polymers due to the presence of pH-dependent redox-active dopants and how it can affect material performance.

Chiral recognition of l-amino acids is of significant importance due to the crucial role of l-amino acids in life sciences and pharmaceutics. In this work, a chiral sensor with capability of probing two chiral amino acids by an attractive single-template molecular imprinting strategy is introduced and used in the simultaneous chiral recognition of d/l-alanine (d/l-Ala) and d/l-tyrosine (d/l-Tyr). The assay relies on the hydrolysis of l-alanyl-l-tyrosine dipeptide doped in silica/polypyrrole (SiO₂/PPy) under acidic conditions, resulting in l-Ala and l-Tyr coimprinted chiral sensor. This work opens up a new avenue for simultaneous chiral sensing of two or more chiral amino acids by incorporating only one template, circumventing the shortcomings encountered with multitemplate molecularly imprinted technology.

Au nanoparticle-decorated polypyrrole nanotubes (defined as PPy/Au nanocomposites) are prepared by an in situ reduction process. Polypyrrole (PPy) nanotubes are prepared by a self-degraded template method, and Au nanoparticles are deposited in situ by the reduction of HAuCl(4) . The size and uniformity of the Au nanoparticles that decorate the PPy nanotubes can be controlled by adjusting the experimental conditions, such as the stabilizers used and the reaction temperature. The morphologies and optical properties of the nanocomposites have been characterized by scanning electron microscopy, transmission electron microscopy, UV-vis, and FT-IR spectroscopy. Conductivity measurements show that the conductivities of the nanocomposites decrease with a decrease of temperature, and the conductivity-temperature relationship obeys the quasi-one dimensional variable range hopping model.

In this article, three different inorganic/organic doped carbon aerogel (CA) materials (Ni-CA, Pd-CA, and Ppy-CA) were, respectively, mixed with ionic liquid (IL) to form three stable composite films, which were used as enhanced elements for an integrated sensing platform to increase the surface area and to improve the electronic transmission rate. Subsequently, the effect of the materials performances such as adsorption, specific surface area and conductivity on electrochemistry for myoglobin (Mb) was discussed using N2 adsorption-desorption isotherm measurements, scanning electron microscopy (SEM), and electrochemical impedance spectroscopy (EIS). Moreover, they could act as sensors toward the detection of hydrogen peroxide (H2O2) with lower detection limits (1.68 μM, 1.02 μM, and 0.85 μM, for Ni-CA/IL/Mb-CPE, Pd-CA/IL/Mb-CPE, and Ppy-CA/IL/Mb-CPE, respectively) and smaller apparent Michaelis-Menten constants KM. The results indicated that the electroconductibility of the doped CA materials would become dominant, thus playing an important role in facilitating the electron transfer. Meanwhile, the synergetic effect with [BMIm]BF4 IL improved the capability of the composite inorganic/organic doped CA/IL matrix for protein immobilization. This work demonstrates the feasibility and the potential of a series of CA-based hybrid materials as biosensors, and further research and development are required to prepare other functional CAs and make them valuable for more extensive application in biosensing.

Polypyrrole/reduced graphene oxide (PPy/RGO) composites on the rigid and plastic conducting substrates were fabricated via a facile two-step electrochemical process at low temperature. The polypyrrole/graphene oxide (PPy/GO) composites were first prepared on the substrate with electrochemical polymerization method, and the PPy/RGO composites were subsequently obtained by electrochemically reducing the PPy/GO. The resultant PPy/GO and PPy/RGO composites were porous, in contrast to the dense and flat pristine PPy films. The cyclic voltammetry measurement revealed that resultant composites exhibited a superior catalytic performance for triiodide reduction in the order of PPy/RGO>> PPy/GO>> PPy. The catalytic activity of PPy/RGO was comparable to that of Pt counter electrode (CE). Under the optimal conditions, an energy conversion efficiency of 6.45% was obtained for a rigid PPy/RGO-based dye-sensitized solar cell, which is 90% of that for a thermally deposited Pt-based device (7.14%). A plastic counter electrode was fabricated by depositing PPy/RGO composites on the plastic ITO/PEN substrate, and then an all-plastic device was assembled and exhibited an energy conversion efficiency of 4.25%, comparable to that of the counterpart using a sputtered-Pt CE (4.83%) on a plastic substrate. These results demonstrated that electrochemical synthesis is a facile low-temperature method to fabricate high-performance RGO/polymer composite-based CEs for plastic DSCs.

Recently, conjugated polymers have been widely explored in the field of nanomedicine. Careful evaluations of their biological effects are thus urgently needed. Hereby, we systematically evaluated the biological effects of different types of conjugated polymers on macrophages and dendritic cells (DCs), which play critical roles in the innate and adaptive immune systems, respectively. While naked poly-(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (

UNASSIGNED

PSS) exhibits a high level of cytotoxicity, polyethylene glycol (PEG) modified

UNASSIGNED

PSS (PEDOT:PSS-PEG) shows greatly reduced toxicity to various types of cells. To our surprise, PEGylation of

UNASSIGNED

PSS could obviously enhance the cellular uptake of these nanoparticles, leading to subsequent immune stimulations of both macrophages and DCs. In contrast, another type of conjugated polymer, polypyrrole (PPy), is found to be an inert material with neither significant cytotoxicity nor noticeable immune-stimulation activity. Interestingly, utilizing ovalbumin (OVA) as a model antigen, it is further uncovered in our ex vivo experiment that

UNASSIGNED

PSS-PEG may serve as an adjuvant to greatly enhance the immunogenicity of OVA upon simple mixing. Our study on the one hand suggests the promise of developing novel nano-adjuvants based on conjugated polymers, and on the other hand highlights the importance of careful evaluations of the impacts of any new nanomaterials developed for nanomedicine on the immune systems.

Ionic polymer-metal composite (IPMC) actuators based on two types of triple-layered Nafion composite membranes were prepared via consecutive solution recasting and electroless plating methods. The triple-layered membranes are composed of a Nafion layer containing an amphiphilic organic molecule (10-camphorsulfonic acid; CSA) in the middle section (for fast and large ion conduction) and two Nafion/modified inorganic composite layers in the outer sections (for large accumulation/retention of mobile ions). For construction of the two types of IPMCs, sulfonated montmorillonite (MMT) and polypyrrole (PPy)-coated alumina fillers were incorporated into the outer layers. Both the triple-layered IPMCs exhibited 42% higher tip displacements at the maximum deflections with a negligible back-relaxation, 50-74% higher blocking forces, and more rapid responses under 3 V dc, compared with conventional single-layered Nafion-IPMCs. Improvements in cyclic displacement under a rectangular voltage input of 3 V at 1 Hz were also made in the triple-layered configurations. Compared with single-layered IPMCs consisting of the identical compositions with the respective outer composite layers, the bending rates and energy efficiencies of both the triple-layered IPMCs were significantly higher, although the blocking forces were a bit lower. These remarkable improvements were attributed to higher capacitances and Young's moduli as well as a more efficient transport of mobile ions and water through the middle layer (Nafion/CSA) and a larger accumulation/retention of the mobile species in the outer functionalized inorganic composite layers. Especially, the triple-layered IPMC with the PPy-modified alumina registered the best actuation performance among all the samples, including a viable actuation even at a low voltage of 1.5 V due to involving efficient redox reactions of PPy with the aid of hygroscopic alumina.

The packing structures and packing effects on excitation energies of oligomers of polyfuran (PFu), polypyrrole (PPy), polycyclopentidene (PCp), polythiophene (PTh), polyphosphole (PPh), and polysilole (PSi) are comparatively studied by employing molecular dynamics (MD) simulations and time-dependent density functional theory (TDDFT) calculations. The dependence of packing structures on the main group of heteroatoms in the five-membered heterocyclic oligomers is exhibited from MD simulations. The planarity of backbones and the population of pi-stacked structures increase with the heteroatoms going from group 14 to group 16; i.e., PCp < PPy < PFu; PSi < PPh < PTh. The polymers with the third row elements, PSi and PPh, tend to have larger chain flexibilities in the packing systems than those with the second row elements, PCp and PPy, respectively. On the basis of the second-order Møller-Plesset perturbation (MP2) and natural bond orbital (NBO) calculations of the pi-stacked pairs, the difference in pi-stack orientations, head-to-tail vs head-to-head, between various packing systems is rationalized by individual interchain bond orbital interactions involved with heteroatoms. The packing systems with higher row elements tend to have narrower band gaps. The band gaps are closely related to the chain torsions driven by interchain interactions. The noticeable chain distortions in the packing systems of PCp, PSi, and PPh lead to the significant increase of band gaps in comparison with those appraised from periodic boundary conditions (PBC) calculations on their planar isolated chains.

Luminescent cyclometalated iridium complexes based on pyridyl appended dipyrrin ligands were prepared and characterized both in the solid state and in solution. The functionalization of the peripheral pyridyl moiety causes dramatic changes on the emission properties of both mono- and hetero- binuclear complexes. A detailed photophysical investigation of the two mononuclear derivatives of the [(Ppy)(2)Ir(dpm-py)] family (Ppy=2-phenylpyridine, dpm-py=5-(4-pyridyl)dipyrrin) was carried out. Introduction of methyl groups at the 3 and 5 positions on the pyridyl unit diminishes the non-radiative rate constant by locking the peripheral pyridyl group orthogonally to the dipyrrinato plane. Thus, they limit the rotational degree of freedom, as well as the charge-transfer character of the excited state. The coordination of these two complexes to a cyclometalated [(dppy)Pt] fragment (dppy=2,6-diphenylpyridine) led to the formation of binuclear species in which the iridium and platinum complexes behave as acceptors and donors, respectively. In these heterobinuclear compounds, the methyl groups do not influence the energy transfer efficiency, which is estimated to be above 90 %. However, they do limit the charge-transfer character of the acceptor's excited state, as well as its rotational degree of freedom, thus avoiding the detrimental effect upon the photophysical performance.

To determine whether neuropeptide Y (NPY)-related mechanisms become activated with progression of cardiac hypertrophy in vivo, protein mass and de novo protein synthesis (incorporation of [(14)C]Phe, 0.1 muCi ml(-1)) were assessed in cardiomyocytes, obtained from spontaneously hypertensive rats (SHRs) and normotensive Wistar Kyoto rats (8, 12, 16, 20, and 24 weeks of age), and cultured for 24 h. NPY (10(-8) M) increased protein mass of cardiomyocytes from 16-week-old SHRs by 9.2 +/- 2.1% (n = 8, P < 0.05). De novo protein synthesis was increased maximally in SHRs at 12, 16, and 20 weeks (P < 0.05, n = 8) in response to NPY by 12.6 +/- 2.1% (10(-6) M), 20.1 +/- 4.2% (10(-8) M), and 9.4 +/- 1.8% (10(-7) M), respectively. Peptide YY(3-36), (PYY(3-36)), which displays selectivity for NPY Y(2) and NPY Y(5) receptors, and the NPY Y(5)-selective agonist [D-Trp(34)]-NPY increased de novo protein synthesis maximally by 16.2 +/- 5.1% (10(-7) M; n = 4, P < 0.05) and 17.8 +/- 5.2% (10(-6) M; n = 7, P < 0.05), respectively, in SHRs at 16 weeks, whereas [Leu(31)Pro(34)]-NPY (< or =10(-6) M), which displays some activity at NPY Y(1) and NPY Y(4) receptors, did not. The NPY Y(1)-selective antagonist BVD-42 (2 x 10(-7) M) and the NPY Y(2)-selective antagonist BIIE0246 (2 x 10(-7) M) did not attenuate responses to NPY (10(-7) M) and PPY(3-36) (10(-7) M). These data indicate that hypertrophic responsiveness to NPY, mediated via NPY Y(5) receptors, is induced transiently in SHR cardiomyocytes subsequent to onset of cardiomyocyte hypertrophy in response to pressure overload.

Pancreatic development and the relationship of the islets with the pancreatic, hepatic, and bile ducts were studied in the Nile tilapia, Oreochromis niloticus, from hatching to the onset of maturity at 7 months. The number of islets formed during development was counted, using either serial sections or dithizone staining of isolated islets. There was a general increase in islet number with both age and size. Tilapia housed in individual tanks grew more quickly and had more islets than siblings of the same age left in crowded conditions. The pancreas is a compact organ in early development, and at 1 day posthatch (dph) a single principal islet, positive for all hormones tested (insulin, SST-14, SST-28, glucagon, and PYY), is partially surrounded by exocrine pancreas. However, the exocrine pancreas becomes more disseminated in older fish, following blood vessels along the mesenteries and entering the liver to form a hepatopancreas. The epithelium of the pancreatic duct system from the intercalated ducts to the main duct entering the duodenum was positive for glucagon and SST-14 in 8 and 16 dph tilapia. Individual insulin-immunopositive cells were found in one specimen. At this early stage in development, therefore, the pancreatic duct epithelial cells appear to be pluripotent and may give rise to the small islets found near the pancreatic ducts in 16-37 dph tilapia. Glucagon, SST-14, and some PPY-positive enteroendocrine cells were present in the intestine of the 8 dph larva and in the first part of the intestine of the 16 dph juvenile. Glucagon and SST-14-positive inclusions were found in the apical cytoplasm of the mid-gut epithelium of the 16 dph tilapia. These hormones may have been absorbed from the gut lumen, since they are produced in both the pancreatic ducts and the enteroendocrine cells. At least three hepatic ducts join the cystic duct to form the bile duct, which runs alongside the pancreatic duct to the duodenum.