A novel polypyrrole (PPy)-based bilayer amperometric glucose biosensor integrated with a permselective layer has been developed for detection of glucose in the presence of interferences. It comprises of a PPy-GOx film grown, in the absence of electrolyte, as an inner layer, and a permselective PPy-Cl film as an outer layer. The PPy-GOx/PPy-Cl bilayer biosensor was effective in rejecting 98% of ascorbic acid and 100% of glycine, glutamic acid and uric acid. With an outer layer thickness of 6.6nm, the bilayer biosensor gave nearly identical glucose response to that of a single layer PPy-GOx biosensor. The biosensor also exhibited good reproducibility (1.9% rsd, n=10), high stability (more than 2months), wide linear range (0.5-24mM), low Km (8.4mM), high Imax (77.2μAcm-2), low detection limit (26.9μM) and good sensitivity (3.5μAcm-2mM-1). The bilayer biosensor was successfully employed for glucose determination in various fruit juices.

A newly prepared [(ppy)2 Ir(dcbpy)](+) ⋅PF6 (-) (ppy: 2-phenylpyridyl; dcbpy: 4,4'-dicarboxy-2,2'-bipyridyl) and gold nanoparticle functionalized mesoporous silica nanoparticle (Au/Ir-MSN) is reported. Based on the binding between concanavalin A (Con A) and mannose, the novel nanoparticle was applied to an ultrasensitive electrochemiluminescence (ECL) in situ cytosensing strategy and the dynamic evaluation of cell-surface carbohydrate expression. The ECL activity of the presented Con A@Au/Ir-MSN nanoprobe was greatly enhanced by employing a functionalized nanoparticle and graphene nanomaterial with an increased surface area and simultaneously improved electron-transfer efficiency at the electrode interface. Under optimal conditions, the sandwich-type ECL cytosensor showed a linear response to K562 cells at concentrations ranging from 1.0×10(2) to 1.0×10(6) cells mL(-1) and realized a low detection limit of a single cell. The proposed method could also be successfully used for monitoring the dynamic variation of carbohydrate expression in cancer cells in response to external stimulation by an inhibitor.

BACKGROUND

It has been suggested that the ectopic expression of PDX1, a dominant pancreatic transcription factor, plays a critical role in the developmental programming of the pancreas even from cells of unrelated tissues such as keratinocytes and amniotic fluid stem cells. In this study we have chosen to drive pancreatic development in human amnion epithelial cells by inducing endogenous PDX1 expression. Further, we have investigated the role of Epidermal Growth Factor (EGF) and Poly-L-Ornithine (PLO) on this differentiation process.

RESULTS

Human amnion epithelial cells expressed high levels of endogenous PDX1 upon transduction with an adenoviral vector expressing murine Pdx1. Other markers of various stages of pancreatic differentiation such as NKX6.1, SOX17, RFX6, FOXA2, CFTR, NEUROD1, PAX4 and PPY were also expressed upon Pdx1 transduction. Although initial expression of pancreatic progenitor markers was higher in culture conditions lacking EGF, for a sustained and increased expression EGF was required. Culture on PLO further increased the positive impact of EGF.

CONCLUSIONS

Pancreatic marker expression subsequent to mPdx1 transduction suggests that this approach may facilitate the in vitro differentiation of hAECs into cells of the endocrine pancreas. This result may have important implications in diabetes therapy.

In this paper, we present the analytical properties of a new type of polypyrrole-based, enzymatic amperometric biosensor. It is produced by encapsulating the enzyme, glucose oxidase (GOx), into onion-type multilamellar vesicles (MLV). We compare its properties to those of a classical GOx-polypyrrole biosensor. When MLV are used to embed GOx in polypyrrole (PPy), GOx behaves as a Michaelis-Menten enzyme. Without MLV, a deviation to the Michaelis-Menten behaviour is observed for high glucose concentrations. Kinetics parameters of both types of biosensors are studied as a function of the surface charge synthesis: GOx encapsulation induces a 200-fold increase of the apparent maximal current (I(m)(app)) and a 10-fold increase of the apparent Michaelis constant (K(m)(app)). Sensitivity is improved by a factor of 5. GOx is also shown to be less sensitive to inhibiting ions (Cl(-)) when MLV are used. A residual amperometric response of 43% instead of 3% is measured. Finally, the long-term stability of biosensors is improved by the GOx encapsulation. All these results are partially explained by our previous study on the morphology of PPy films fabricated with GOx encapsulated into onion-type MLV (Olea et al., 2007).

Nowadays, the integrated systems on a plane substrate containing energy harvesting, energy storing, and working units are strongly desired with the fast development of wearable and portable devices. Here, a simple, low cost, and scalable strategy involving ink printing and electrochemical deposition is proposed to fabricate a flexible integrated system on a plane substrate containing an all-solid-state asymmetric microsupercapacitor (MSC), a photoconduct-type photodetector of perovskite nanowires (NWs), and a wireless charging coil. In the asymmetric MSCs, MnO2-PPy and V2O5-PANI composites are used as positive and negative electrodes, respectively. Typical values of energy density in the range of 15-20 mWh cm-3 at power densities of 0.3-2.5 W cm-3 with an operation potential window of 1.6 V are achieved. In the system, the wireless charging coil receives energy from a wireless power transmitter, which then can be stored in the MSC to drive the photoconductive detector of perovskite NWs in sequence. The designed integrated system exhibits a stable photocurrent response comparable with the detector driven by an external power source. This research provides an important routine to fabricate integrated systems.

The synthesis, structure, and photophysical properties of a new cyclometalated dinuclear iridium complex, (ppy)2Ir(mu-BPB)Ir(ppy)2 [ppy = 2-phenylpyridine, BPB = 1,4-bis(pyridin-2-yl)benzene], have been investigated.

Preparation of conducting-polymer hollow nanoparticles with different diameters was accomplished by surfactant templating. An anionic surfactant, namely sodium dodecylbenzenesulfonate, formed vesicles to template with the pyrrole monomer. Subsequent chemical oxidative polymerization of the monomer yielded spherical polypyrrole (PPy) nanoparticles with hollow interiors. The diameter of the hollow nanoparticles was easily controlled by adjusting the concentration of the surfactant. Subsequently, the size-dependent electrochemical properties of the nanoparticles, including redox properties and charge/discharge behavior, were examined. By virtue of the structural advantages, the specific capacitance (max. 326 F g(-1)) of PPy hollow nanoparticles was approximately twice as large as that of solid PPy nanospheres. The hollow PPy nanostructure can easily be used as a conductive substrate for the preparation of metal/polymer nanohybrids through chemical and electrochemical deposition. Two different pseudocapacitive metal-oxide clusters were readily deposited on the inner and outer surfaces of the hollow nanoparticles, which resulted in an increase in the specific capacitance to 390 F g(-1). In addition, the hollow nanoparticles acted as a nanocage to prevent metal ion leaching during charge/discharge, thus allowing an excellent capacitance retention of ca. 86%, even following 10,000 cycles.

Polymeric microelectrode arrays (MEAs) are emerging as a new generation of biointegrated microelectrodes to transduce original electrochemical signals in living tissues to external electrical circuits, and vice versa. So far, the challenge of stretchable polymeric MEAs lies in the competition between high stretchability and good electrode-substrate adhesion. The larger the stretchability, the easier the delamination of electrodes from the substrate due to the mismatch in their Young's modulus. In this work, polypyrrole (PPy) electrode materials are designed, with PPy nanowires integrated on the high conductive PPy electrode arrays. By utilizing this electrode material, for the first time, stretchable polymeric MEAs are fabricated with both high stretchability (≈100%) and good electrode-substrate adhesion (1.9 MPa). In addition, low Young's modulus (450 kPa), excellent recycling stability (10 000 cycles of stretch), and high conductivity of the MEAs are also achieved. As a proof of concept, the as-prepared polymeric MEAs are successfully used for conformally recording the electrocorticograph signals from rats in normal and epileptic states, respectively. Further, these polymeric MEAs are also successful in stimulating the ischiadic nerve of the rat. This strategy provides a new perspective to the highly stretchable and mechanically stable polymeric MEAs, which are vital for compliant neural electrodes.

The designed synthesis of a sensitive phosphorescent chemosensor [Ir(ppy)(2)(L1)](PF(6)) (1) (Hppy = 2-phenylpyridine, L1 = 4'-methyl-2,2'-bipyridyl-4-carbaldehyde oxime) was carried out for selective detection of hypochlorite (ClO(-)). Complex 1 is weakly emissive in solution at ambient temperature due likely to rapid isomerization of C=N-OH as an effective non-radiative decay process. When 1 reacts with ClO(-), however, the emission is remarkably enhanced, in which the oxime in L1 is converted to a carboxylic acid in L2 (4'-methyl-2,2'-bipyridine-4-carboxylic acid). The produced complex [Ir(ppy)(2)(L2)](PF(6)) (2) exhibits bright orange-yellow luminescence originating from [5d(Ir) → π*(bpy)] (3)MLCT and [π(ppy) → π*(bpy)] (3)LLCT triplet excited states as suggested from the DFT computational studies. The selective and competitive experiments reveal that complex 1 shows high sensing selectivity and sensitivity for ClO(-) over other reactive oxygen species (ROS) and metal ions.

Multiple stretchability has never been demonstrated as supercapacitors because the hydrogel used cannot fully recover after being heavily deformed. Now, a highly reversibly stretchable all-polymer supercapacitor was fabricated using a developed double network hydrogel (DN hydrogel) as electrolyte and pure polypyrrole (PPy) as electrode. The DN hydrogel provides excellent mechanical properties, which can be stretched up to 500 % many times and then restore almost 100 % of the original length. To fabricate the fully recoverable stretchable supercapacitor, we annealed a free-standing pure conducting polymer film as electrode so that the electrodes induced retardance is minimized. The as-fabricated DN hydrogel/pure conducting polymer supercapacitors can be perfectly recovered from 100 % strain with almost no residual deformation left and the electrochemical performance can be maintained even after 1000 stretches (but not bending).

Obesity may protect against the nutritional consequences of short bowel syndrome. We hypothesized that rats preconditioned with an obesogenic diet would have better outcomes after surgical induction of short bowel syndrome compared to rats on regular chow. Rats were fed a high-fat diet or regular rat chow for six months, and then underwent 50% proximal, 50% distal, or sham enterectomy. Food intake, weight, and body composition were monitored before and for 4 weeks after surgery. The high-fat diet consistently produced obesity (>25% body fat). All procedures induced weight loss, but there was no discernable difference between resection vs. sham resection. Rats on the high-fat diet had a greater post-resection loss of body fat compared to rats on chow (36 vs. 26 g, respectively). There was a nonsignificant trend of less lean mass loss in the former compared to the latter rats (16 vs. 33 g, respectively). Enterectomy moderated serum ghrelin, GIP, PPY, insulin, and leptin. Intestinal adaptation was not different between obese vs. non-obese rats. Rats preconditioned with the high-fat diet may have had better retention of lean body mass after a surgical procedure compared to rats on chow. The effect of 50% enterectomy was less than expected.

An electroresponsive drug release system based on polypyrrole (Ppy) nanowires was developed to induce the local delivery of anticancer drug, doxorubicin (DOX), according to the applied electric field. DOX-conjugated Ppy nanowire (NW) (DOX/Ppy NW) array was initially prepared by electrochemical deposition of a mixture of pyrrole monomers and biotin as dopants in the anodic alumina oxide membrane as a sacrificial template. Morphological observation by scanning electron microscopy revealed free-standing and 3D nanotopographical features with large surface area and high density. In addition, we investigated the antitumor efficacy of DOX released from DOX/Ppy NW array in response to the external electric field using two kinds of cancer cell lines, human oral squamous carcinoma cells (KB cells) and human breast cancer cells (MCF7 cells). Meanwhile, strong photothermal effect as a result of a near-infrared absorbing ability of Ppy synergistically maximizes the chemotherapeutic efficacy. Our results suggested that the proposed multifunctional Ppy platform possessing several beneficial features is very promising for many therapeutic applications including cancer.

Polypyrrole/Graphene/Polyaniline (PPy/GNs/PANi) ternary nanocomposite with high thermoelectric power factor has been successfully prepared through the combination of in situ polymerization and solution process. FTIR, Raman spectra, XRD, and SEM analyses show the strong π-π interactions existed among PPy, GNs, and PANi, leading to the formation of more ordered regions in the composite. Both the in situ polymerization and solution process can enhance the dispersion homogeneity of graphene in the polymer matrix, bringing about increased nanointerfaces in the PPy/GNs/PANi composite. The thermoelectric properties of Polypyrrole/Graphene (PPy/GNs), Polyaniline/Graphene (PANi/GNs), and PPy/GNs/PANi composites are measured at different temperatures after being cold pressed. Consequently, the PPy/GNs/PANi composite with 32 wt % graphene demonstrates optimal electrical conductivity, Seebeck coefficient and extremely high power factor of up to 52.5 μ W m-1 K-2, which is almost 1.6 × 103 times, 1.4 × 103 times, 2.7 times, and 3.6 times higher than those of the pure PANi, pure PPy, PPy/GNs composite, and PANi/GNs composite, respectively.

Electrically conducting biomaterials have gained great attention in various biomedical studies especially to influence cell and tissue responses. In addition, wrinkling can present a unique topography that can modulate cell-material interactions. In this study, we developed a simple method to create wrinkle topographies of conductive polypyrrole (wPPy) on soft polydimethylsiloxane surfaces via a swelling-deswelling process during and after PPy polymerization and by varying the thickness of the PPy top layers. As a result, various features of wPPy in the range of the nano- and microscales were successfully obtained. In vitro cell culture studies with NIH 3T3 fibroblasts and PC12 neuronal cells indicated that the conductive wrinkle topographies promote cell adhesion and neurite outgrowth of PC12 cells. Our studies help to elucidate the design of the surface coating and patterning of conducting polymers, which will enable us to simultaneously provide topographical and electrical signals to improve cell-surface interactions for potential tissue-engineering applications.

Conducting polymer hydrogels emerge as a novel class of polymeric materials that show great potential in many energy, environmental, and biomedical devices. We describe here for the first time a general supramolecular approach toward controlled in situ synthesis of one-dimensional nanostructured conductive hydrogels (polypyrrole (PPy) as a model system) using a rational dopant counterion, which is a disc-shaped liquid crystal molecular copper phthalocyanine-3,4',4″,4‴-tetrasulfonic acid tetrasodium salt (CuPcTs). The dopant molecule CuPcTs cross-linked the PPy chains to form a three-dimensional network that gelated into a hydrogel. The PPy hydrogel could be synthesized in bulk quantities with uniform morphology of self-assembled interconnected nanofibers. The tetra-functional dopant favors a supramolecular self-assembly mechanism to form one-dimensional PPy nanostructures. Furthermore, the enhanced interchain charge transport of CuPcTs doped PPy resulted in greatly enhanced conductivity and pseudocapacitance compared with pristine PPy.

The selective functionalization of chemically inert C-H bonds remains to be fully realized in achieving organic transformations that are redox-neutral, waste-limiting, and atom-economical. The catalytic generation of chlorine atoms from chloride ions is one of the most challenging redox processes, where the requirement of harsh and oxidizing reaction conditions renders it seldom utilized in synthetic applications. We report the mild, controlled, and catalytic generation of chlorine atoms as a new opportunity for access to a wide variety of hydrogen atom transfer (HAT) reactions owing to the high stability of HCl. The discovery of the photoredox mediated generation of chlorine atoms with Ir-based polypyridyl complex, [Ir(dF(CF3 )ppy)2 (dtbbpy)]Cl, under blue LED irradiation is reported.

For cancer nanomedicine, the main goal is to deliver therapeutic agents effectively to solid tumors. Here, we report the unique design of self-adaptive ultrafast charge-reversible chitosan-polypyrrole nanogels (CH-PPy NGs) for enhanced tumor delivery and augmented chemotherapy. CH was first grafted with PPy to form CH-PPy polymers that were used to form CH-PPy NGs through glutaraldehyde cross-linking via a miniemulsion method. The CH-PPy NGs could be finely treated with an alkaline solution to generate ultrafast charge-reversible CH-PPy-OH-4 NGs (R-NGs) with a negative charge at a physiological pH and a positive charge at a slightly acidic pH. The R-NGs display good cytocompatibility, excellent protein resistance, and high doxorubicin (DOX) loading efficiency. Encouragingly, the prepared R-NGs/DOX have prolonged blood circulation time, enhanced tumor accumulation, penetration and tumor cell uptake due to their self-adaptive charge switching to be positively charged, and responsive drug delivery for augmented chemotherapy of ovarian carcinoma in vivo. Notably, the tumor accumulation of R-NGs/DOX (around 4.7%) is much higher than the average tumor accumulation of other nanocarriers (less than 1%) reported elsewhere. The developed self-adaptive PPy-grafted CH NGs represent one of the advanced designs of nanomedicine that could be used for augmented antitumor therapy with low side effects.

Keywords: Active transportation; Deep tumor penetration; Enhanced antitumor activity; Nanogels; Ultrafast charge conversion.

A series of blue and blue-green emitters based on neutral bis- and tris-cyclometalated Ir(III) complexes with 1-benzyl-4-(2,6-difluorophenyl)-1H-1,2,3-triazole (dfptrBn) as cyclometalating ligand is reported. The bis-cyclometalated complexes of the type [Ir(dfptrBn)(2)(L(^)X)] with different ancillary ligands, L(^)X = picolinate (pic) (2) or 2-(5-(perfluorophenyl)-2H-1,2,4-triazol-3-yl)pyridine (pytrF(5)) (3), are described and their photophysical properties compared with the analogous complexes containing the archetypal 2-(2,4-difluorophenyl)pyridinato (dfppy) as cyclometaled ligand (C(^)N). Complex 2 exhibits a marked solvatochromic behavior, from 475 nm in toluene to 534 nm in formamide, due to the strong MLCT character of its emissive excited state. Complex 3 displays a true-blue emission, narrower in the visible part than FIrpic. In addition, the homoleptic complex [Ir(dfprBn)(3)] (4) and the heteroleptic compounds with mixed arylpyridine/aryltriazole ligands, [Ir(dfptrBn)(2)(C(^)N)] (C(^)N = 2-phenylpyridinato (ppy) (5) or dfppy (6)), have been synthesized and fully characterized. The facial (fac) complex fac-4 is emissive at 77 K showing a deep-blue emission, but it is not luminescent in solution at room temperature similarly to their phenylpyrazole counterparts. However, the fac isomers, fac-5 and fac-6, are highly emissive in solution and thin films, reaching emission quantum yields of 76%, with emission colors in the blue to blue-green region. The photophysical properties for all complexes have been rationalized by means of quantum-chemical calculations. In addition, we constructed electroluminescent devices, organic light-emitting diodes (OLEDs) by sublimation of fac-6, and by solution processed polymer-based devices (PLEDs) using complexes fac-5 or fac-6 as dopants.

Vitamin B₁₂ is very important for human metabolism and its deficiency can cause anemia and the production of large red blood cells. An increased concentration of methylmalonic acid (MMA) is detected much before the transformation of blood cells, which thereby is an early indicator for mild or serious Vitamin B₁₂ deficiency. A simple electrochemical sensor based on Palladium-Gold (PdAu) was developed by electrodeposition of PdAu nanoparticles on Polypyrrole (PPy) modified carbon fiber paper (CFP) electrode. The modified electrodes were characterized by High resolution transmission electron microscopy (HRTEM), Field emission scanning electron microscopy (FESEM) with energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electroanalytical techniques. Differential Pulse Voltammetric (DPV) studies have established that under optimum conditions, the developed sensor exhibits a broad linear dynamic range (4.01 pM - 52.5 nM) with a very low detection limit (1.32 pM). The proposed method was effectively applied in the non-enzymatic determination of MMA at an ultralow level in human blood serum and urine samples. The method displayed high selectivity toward MMA in the presence of other interfering substances.

Keywords: Electrochemical; Human blood serum; Methylmalonic acid (MMA); PdAu nanoparticles; Polypyrrole.

A highly electroactive bio-nanohybrid film of polypyrrole (PPy)-Nafion (Nf)-functionalized multi-walled carbon nanotubes (fMWCNTs) nanocomposite was prepared on the glassy carbon electrode (GCE) by a facile one-step electrochemical polymerization technique followed by chitosan-glucose oxidase (CH-GOx) immobilization on its surface to achieve a high-performance glucose biosensor. The as-fabricated nanohybrid composite provides high surface area for GOx immobilization and thus enhances the enzyme-loading efficiency. The structural characterization revealed that the PPy-Nf-fMWCNTs nanocomposite films were uniformly formed on GCE and after GOx immobilization, the surface porosities of the film were decreased due to enzyme encapsulation inside the bio-nanohybrid composite materials. The electrochemical behavior of the fabricated biosensor was investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and amperometry measurements. The results indicated an excellent catalytic property of bio-nanohybrid film for glucose detection with improved sensitivity of 2860.3μAmM(-1)cm(-2), the linear range up to 4.7mM (R(2)=0.9992), and a low detection limit of 5μM under a signal/noise (S/N) ratio of 3. Furthermore, the resulting biosensor presented reliable selectivity, better long-term stability, good repeatability, reproducibility, and acceptable measurement of glucose concentration in real serum samples. Thus, this fabricated biosensor provides an efficient and highly sensitive platform for glucose sensing and can open up new avenues for clinical applications.

[reaction: see text] The syntheses of bicyclic diaminopyridines 3 and 4 and tricyclic triaminopyridines 5 and 6, two novel series of nucleophilic catalysts, are described. Arguments are made for predicting the superiority of these catalysts over DMAP and even 2, the best esterification catalyst reported to date. The efficiencies of DMAP, PPY, and 2-6 in catalyzing the esterification of tertiary alcohols were compared. As predicted, 5 and 6 were about 6-fold more effective than DMAP and slightly better than 2.

A novel, modified polypyrrole/m-phenylediamine (PPy-mPD) composite, decorated with magnetite (Fe₃O₄) nanoparticles, and prepared via an in-situ oxidative polymerisation, was investigated. The PPy-mPD/Fe₃O₄ nanocomposite was employed for the removal of highly toxic oxyanion hexavalent chromium Cr(VI) from an aqueous solution. The structure and successful formation of the PPy-mPD/Fe₃O₄ nanocomposite was confirmed and investigated using various techniques. The presence of Fe₃O₄ was confirmed by high resolution transmission electron microscopy, with an appearance of Fe lattice fringes. The estimation of the saturation magnetisation of the nanocomposite, using a vibrating sample magnetometer, was observed to be 6.6 emu/g. In batch adsorption experiments, PPy-mPD/Fe₃O₄ nanocomposite (25 mg) was able to remove 99.6% of 100 mg/L of Cr(VI) at pH 2 and 25 °C. Adsorption isotherms were investigated at different Cr(VI) concentration (100-600 mg/L) and temperature (15-45 °C). It was deduced that adsorption follows the Langmuir model, with a maximum adsorption capacity of 555.6 mg/g for Cr(VI) removal. Furthermore, isotherm data were used to calculate thermodynamic values for Gibbs free energy, enthalpy change and entropy change, which indicated that Cr(VI) adsorption was spontaneous and endothermic in nature. Adsorption-desorption experiments revealed that the nanocomposite was usable for two consecutive cycles with no significant loss of adsorption capacity. This research demonstrates the application potential for the fascinating properties of PPy-mPD/Fe₃O₄ nanocomposite as a highly efficient adsorbent for the removal of heavy metal ions from industrial wastewater.

The effects of the polymerization temperature and of voltammetric cycling on the chain length and the resistivity of polypyrrole films are investigated. The studies provide further proof for the existence of at least two different types of polypyrrole, the so-called PPy I and PPy II. As the electropolymerization of conjugated systems in contrast to normal polymerization reactions is a fully activated process, the generation of these different types of PPy depends on experimental parameters such as temperature or formation potentials. UV-vis measurements demonstrate that PPy II comprises significantly shorter chains than PPy I (8-12 vs 32-64 units); moreover, film conductivity is found to increase with the fraction of PPy II. This fraction is changed via the polymerization temperature as well as by cyclic voltammetry, both of which can induce a metal-insulator transition. The counter-intuitive relationship between resistivity and chain length is interpreted in terms of disorder-dominated transport, in which the shorter chains of PPy II support the formation of delocalized electronic states, thereby increasing the localization length. Thus, our results are in agreement with recent broadband reflectivity measurements.

The significance of developing implantable, biocompatible, miniature power sources operated in a low current range has become manifest in recent years to meet the demands of the fast-growing market for biomedical microdevices. In this work, we focus on developing high-performance cathode material for biocompatible zinc/polymer batteries utilizing biofluids as electrolyte. Conductive polymers and graphene are generally considered to be biocompatible and suitable for bioengineering applications. To harness the high electrical conductivity of graphene and the redox capability of polypyrrole (PPy), a polypyrrole fiber/graphene composite has been synthesized via a simple one-step route. This composite is highly conductive (141 S cm(-1)) and has a large specific surface area (561 m(2) g(-1)). It performs more effectively as the cathode material than pure polypyrrole fibers. The battery constructed with PPy fiber/reduced graphene oxide cathode and Zn anode delivered an energy density of 264 mWh g(-1) in 0.1 M phosphate-buffer saline.