Supramolecular photosynthetic systems made up of the [Ir(ppy)(2)(bpy)](+) and [Co(bpy)(3)](2+) cores (ppy = 2-phenylpyridinate, bpy = 2,2'-bipyridine) are in situ self-assembled in aqueous media to generate H(2) upon visible light irradiation, where one of them recorded a relatively high turnover number of 20.

We describe the necessary design criteria to create highly efficient energy transfer conjugates containing luciferase enzymes derived from Photinus pyralis (Ppy) and semiconductor quantum rods (QRs) with rod-in-rod (r/r) microstructure. By fine-tuning the synthetic conditions, CdSe/CdS r/r-QRs were prepared with two different emission colors and three different aspect ratios (l/w) each. These were hybridized with blue, green, and red emitting Ppy, leading to a number of new BRET nanoconjugates. Measurements of the emission BRET ratio (BR) indicate that the resulting energy transfer is highly dependent on QR energy accepting properties, which include absorption, quantum yield, and optical anisotropy, as well as its morphological and topological properties, such as aspect ratio and defect concentration. The highest BR was found using r/r-QRs with lower l/w that were conjugated with red Ppy, which may be activating one of the anisotropic CdSe core energy levels. The role QR surface defects play on Ppy binding, and energy transfer was studied by growth of gold nanoparticles at the defects, which indicated that each QR set has different sites. The Ppy binding at those sites is suggested by the observed BRET red-shift as a function of Ppy-to-QR loading (L), where the lowest L results in highest efficiency and furthest shift.

The fluorescence and phosphorescence of 2,2'-bis(5-phenyl-1,3,4-oxadiazol-2-yl)biphenyl shows good spectral matching with the absorption spectra of the MLCT1 and MLCT3 transitions of Ir(ppy)3. The red-shift of the 0-0 band in the phosphorescence at 77 K is due to the intramolecular pi-pi interactions between the oxadiazole side chains. Maximum brightness of 43,000 cd/m2 with an efficiency of 26 cd/A at 200 cd/m2 was achieved when BOBP was used as the host material for Ir(ppy)3 in the PHOLED study. [structure: see text].

With the aim of detecting rapidly the presence of Escherichia coli (E. coli), a disposable amperometric immunosensor was developed based on a double layered configuration at the transducer surface, consisting first of a polypyrrole-NH(2)-anti-E. coli antibody (PAE) inner layer followed by an alginate-polypyrrole (Alg-Ppy) outer packing layer. In the presence of the substrate p-aminophenyl beta-D-galactopyranoside (PAPG), the bacterial enzyme, beta-D-galactosidase produces the p-aminophenol (PAP) product, also generating an amperometric signal due to PAP electrooxidation by potentiostating the glassy carbon (GC) electrode at 0.22V. The operational procedure consists in first adding the test sample containing the bacteria, then coating it with Alg-Ppy to ensure the confinement of the released enzyme and the analyte (being generated by the enzymatic catalysis) to the electrode active surface. This procedure facilitates the diffusion of the substrate within the complex and thus creates a higher oxidation level of the PAP enabling a detection limit of 10 colony forming units (CFU)/ml. The immunosensor setup demonstrates an improved detection limit of more than 10 times less bacteria detected than other immunosensing techniques without the need for multi step pretreatments of the test sample and/or incubation as found in some of the existing methods.

A four-coordinate organoboron compound B(ppy)Mes(2) (1, ppy=2-phenylpyridyl, Mes=mesityl) was previously found to undergo reversible photochromic switching through the formation/breaking of a C-C bond, accompanied by a dramatic color change from colorless to dark blue. To understand this unusual phenomenon, a series of new four-coordinate boron compounds based on the ppy-chelate ligand and its derivatives have been synthesized. In addition, new N,C-chelate ligands based on benzo[b]thiophenylpyridine and indolylpyridine have also been synthesized and their boron compounds were investigated. The crystal structures of most of the new compounds were determined by X-ray diffraction analysis. UV/Vis, NMR, and electrochemical methods were used to monitor the photoisomerization process. DFT calculations were performed for all compounds to understand the photophysical and electronic properties of this class of molecules. The results of our study showed that the bulky mesityl group is necessary for photochromic switching. Electron-donating and electron-withdrawing groups on the ppy chelate have a distinct impact on the photoisomerization rate and the photochemical stability of the molecule. Furthermore, we have found that the non-ppy-based N,C-chelate ligands such as benzo[b]thiophenepyridyl can also promote photoisomerization of the boron chromophore in the same manner as the ppy chelate, but the product is thermally unstable.

The introduction and designing of functional thermoresponsive hydrogels have been recommended as recent potential therapeutic approaches for biomedical applications. The development of bioactive materials such as thermosensitive gelatin-incorporated nano-organic materials with a porous structure and photothermally triggerable and cell adhesion properties may potentially achieve this goal. This novel class of photothermal hydrogels can provide an advantage of hyperthermia together with a reversibly transformable hydrogel for tissue engineering. Polypyrrole (Ppy) is a bioorganic conducting polymeric substance and has long been used in biomedical applications owing to its brilliant stability, electrically conductive features, and excellent absorbance around the near-infrared (NIR) region. In this study, a cationic photothermal triggerable/guidable gelatin hydrogel containing a polyethylenimine (PEI)⁻Ppy nanocomplex with a porous microstructure was established, and its physicochemical characteristics were studied through dynamic light scattering, scanning electronic microscopy, transmission electron microscopy, an FTIR; and cellular interaction behaviors towards fibroblasts incubated with a test sample were examined via MTT assay and fluorescence microscopy. Photothermal performance was evaluated. Furthermore, the in vivo study was performed on male Wistar rat full thickness excisions model for checking the safety and efficacy of the designed gelatin⁻PEI⁻Ppy nanohydrogel system in wound healing and for other biomedical uses in future. This photothermally sensitive hydrogel system has an NIR-triggerable property that provides local hyperthermic temperature by PEI⁻Ppy nanoparticles for tissue engineering applications. Features of the designed hydrogel may fill other niches, such as being an antibacterial agent, generation of free radicals to further improve wound healing, and remodeling of the promising photothermal therapy for future tissue engineering applications.

Here we demonstrate that a free-standing carbon nanotube (CNT) array can be used as a large surface area and high porosity 3D platform for molecular imprinted polymer (MIP), especially for surface imprinting. The thickness of polymer grafted around each CNT can be fine-tuned to imprint different sizes of target molecules, and yet it can be thin enough to expose every imprint site to the target molecules in solution without sacrificing the capacity of binding sites. The performance of this new CNT-MIP architecture was first assessed with a caffeine-imprinted polypyrrole (PPy) coating on two types of CNT arrays: sparse and dense CNTs. Real-time pulsed amperometric detection was used to study the rebinding of the caffeine molecules onto these CNT-MIPPy sensors. The dense CNT-MIPPy sensor presented the highest sensitivity, about 15 times better when compared to the conventional thin film, whereas an improvement of 3.6 times was recorded on the sparse CNT. However, due to the small tube-to-tube spacing in the dense CNT array, electrode fouling was observed during the detection of concentrated caffeine in phosphate buffer solution. A new I-V characterization method using pulsed amperometry was introduced to investigate the electrical characterization of these new devices. The resistance value derived from the I-V plot provides insight into the electrical conductivity of the CNT transducer and also the effective surface area for caffeine imprinting.

A highly diastereoselective and enantioselective method for the asymmetric desymmetrization of 4,4-disubstituted cyclohexadienones using the Michael addition reaction of malonates under catalysis with the primary amine-thiourea conjugate catalyst and PPY at high pressure was developed.

We report on three Ir(iii) molecular catalysts for water oxidation: 1, [Cp*Ir(ppy)Cl]; 2, [Cp*Ir(bzpy)NO(3)]; 3, [Cp*Ir(H(2)O)(3)](NO(3))(2). 2 and 3 are water-soluble and show a long-term activity ca. 2 and 3 times higher than 1. It is remarkable that 3, having the simplest structure, is the catalyst with the highest activity.

[CpIrCl(2)](2) () and new CpIr(III)(L-L)X complexes (L-L = N-O or C-N chelating ligands; X = Cl, I, Me) have been prepared and their reactivity with two-electron chemical oxidants explored. Reaction of with PhI(OAc)(2) in wet solvents yields a new chloro-bridged dimer in which each of the Cp ligands has been singly acetoxylated to form [Cp(OAc)Ir(III)Cl(2)](2) () (Cp(OAc) = eta(5)-C(5)Me(4)CH(2)OAc). Complex and related carboxy- and alkoxy-functionalized Cp(OR) complexes can also be prepared from plus (PhIO)(n) and ROH. [Cp(OAc)Ir(III)Cl(2)](2) () and the methoxy analogue [Cp(OMe)Ir(III)Cl(2)](2) () have been structurally characterized. Treatment of [CpIrCl(2)](2) () with 2-phenylpyridine yields CpIr(III)(ppy)Cl () (ppy = cyclometallated 2-phenylpyridyl) which is readily converted to its iodide and methyl analogues CpIr(III)(ppy)I and CpIr(III)(ppy)Me (). CpIr(III) complexes were also prepared with N-O chelating ligands derived from anthranilic acid (2-aminobenzoic acid) and alpha-aminoisobutyric acid (H(2)NCMe(2)COOH), ligands chosen to be relatively oxidation resistant. These complexes and were reacted with potential two-electron oxidants including PhI(OAc)(2), hexachlorocyclohexadienone (C(6)Cl(6)O), N-fluoro-2,4,6-trimethylpyridinium (Me(3)pyF(+)), [Me(3)O]BF(4) and MeOTf (OTf = triflate, CF(3)SO(3)). Iridium(V) complexes were not observed or implicated in these reactions, despite the similarity of the potential products to known CpIr(V) species. The carbon electrophiles [Me(3)O]BF(4) and MeOTf appear to react preferentially at the N-O ligands, to give methyl esters in some cases. Overall, the results indicate that Cp is not inert under oxidizing conditions and is therefore not a good supporting ligand for oxidizing organometallic complexes.

Novel composites of nanocellulose and the conducting polymer polypyrrole (PPy) are herein suggested as potential candidates for active ion-extraction membranes in electrochemically controlled hemodialysis. This study has defined processing parameters to obtain a biocompatible nanocellulose-PPy composite, and for the first time, the effect of the composite aging on cell viability has been studied. The influence of rinsing and extraction process steps, as well as aging under different conditions (i.e. in air, at -20°C and in argon), on the electroactivity and cytotoxicity of a PPy-nanocellulose composite has been investigated. The biocompatibility evaluation was based on indirect toxicity assays with fibroblasts and monocyte cell lines and an acute toxicity test in mice, while the electroactivity was evaluated by cyclic voltammetry experiments. The as-prepared composite did not induce any cytotoxic response in vitro or in vivo. Extensive rinsing and 48 h incubation in biological buffer previous to the preparation of the culture medium extracts were, however, necessary to obtain a noncytotoxic composite. The as-prepared composite was also found to exhibit acceptable electrochemical performance, which was retained upon 4 weeks storage in argon atmosphere. It was shown that aging of the composite had a negative effect on biocompatibility, regardless of the storage condition. Thus, to allow for longtime storage of electroactive nanocellulose-PPy hemodialysis membranes, the degradation of PPy upon storage must be controlled. The present results show that the biocompatibility of PPy composites depends on the rinsing and pretreatment of the composite material as well as the aging of the material.

BACKGROUND

The aim of the present study was to identify demographic and treatment factors that were predictive of hypoglycemia in a large cohort of type 2 diabetic patients initiating insulin detemir.

METHODS

The present 24-week observational study of insulin initiation included 17 374 participants from 10 countries. Severe hypoglycemia was defined as an event requiring third party assistance; minor hypoglycemia was defined as a daytime or nocturnal glucose measurement <3.1 mmol/L.

RESULTS

Prior to initiating insulin therapy, 4.9% of the cohort reported hypoglycemia (pre-insulin hypoglycemia), with most (94.2%) reporting minor events and 9.6% reporting severe events. Compared with patients without pre-insulin hypoglycemia, those with pre-insulin hypoglycemia had a higher incidence of events of minor hypoglycemia (1.72 vs 4.46 events per patient-year [ppy], respectively), nocturnal hypoglycemia (0.25 vs 1.09 events ppy, respectively), and severe hypoglycemia (<0.01 vs 0.04 events ppy, respectively) at final visit. Age (P < 0.047), body mass index (P < 0.001), a prior history of microvascular disease (P < 0.001), pre-insulin hypoglycemia (P < 0.001), increased number of oral hypoglycemic agents (OHAs; P < 0.001), OHA intensification (P < 0.001), and the use of glinides (P = 0.004) were all found to be independently associated with the occurrence of hypoglycemia during the study.

CONCLUSIONS

Once-daily insulin detemir therapy was safe and effective, and rates of hypoglycemia were low. Concerns about hypoglycemia should not deter the initiation of basal insulin analogs.

The problem of microorganisms attaching and proliferating on implants and medical devices surfaces is still attracting interest in developing research on different coatings based on antibacterial agents. The aim of this work is centered on modifying titanium (Ti) based implants surfaces through incorporation of a natural compound with antimicrobial effect, torularhodin (T), by means of a polypyrrole (PPy) film. This study tested the potential antimicrobial activity of the new coating against a range of standard bacterial strains: Escherichia coli, Staphylococcus aureus, Enterococcus faecalis, Bacillus subtilis and Pseudomonas aeruginosa. The morphology, physical and electrochemical properties of the synthesized films were assessed by SEM, AFM, UV-Vis, FTIR and cyclic voltammetry. In addition, biocompatibility of this new coating was evaluated using L929 mouse fibroblast cells. The results showed that PPy-torularhodin composite film acts as a corrosion protective coating with antibacterial activity and it has no harmful effect on cell viability.

Imaging guided photothermal agents have attracted great attention for accurate diagnosis and treatment of tumors. Herein, multifunctional NaYF4:Yb/Er@polypyrrole (PPy) core-shell nanoplates are developed by combining a thermal decomposition reaction and a chemical oxidative polymerization reaction. Within such a composite nanomaterial, the core of the NaYF4:Yb/Er nanoplate can serve as an efficient nanoprobe for upconversion luminescence (UCL)/X-ray computed tomography (CT) dual-modal imaging, the shell of the PPy shows strong near infrared (NIR) region absorption and makes it effective in photothermal ablation of cancer cells and infrared thermal imaging in vivo. Thus, this platform can be simultaneously used for cancer diagnosis and photothermal therapy, and compensates for the deficiencies of individual imaging modalities and satisfies the higher requirements on the efficiency and accuracy for diagnosis and therapy of cancer. The results further provide some insight into the exploration of multifunctional nanocomposites in the photothermal theragnosis therapy of cancers.

The development of an efficient and stable artificial photosensitizer for visible-light-driven hydrogen production is highly desirable. Herein, a new series of charge-neutral, heteroleptic tricyclometalated iridium(III) complexes, [Ir(thpy)2(bt)] (1-4; thpy = 2,2'-thienylpyridine, bt = 2-phenylbenzothiazole and its derivatives), were systematically synthesized and their structural, photophysical, and electrochemical properties were established. Three solid-state structures were studied by X-ray crystallographic analysis. This design offers the unique opportunity to drive the metal-to-ligand charge-transfer (MLCT) band to longer wavelengths for these iridium complexes. We describe new molecular platforms that are based on these neutral iridium complexes for the production of hydrogen through visible-light-induced photocatalysis over an extended period of time in the presence of [Co(bpy)3](2+) and triethanolamine (TEOA). The maximum amount of hydrogen was obtained under constant irradiation over 72 h and the system could regenerate its activity upon the addition of cobalt-based catalysts when hydrogen evolution ceased. Our results demonstrated that the dissociation of the [Co(bpy)3](2+) catalyst contributed to the loss of catalytic activity and limited the long-term catalytic performance of the systems. The properties of the neutral complexes are compared in detail to those of two known non-neutral bpy-type complexes, [Ir(thpy)2(dtb-bpy)](+) (5) and [Ir(ppy)2(dtb-bpy)](+) (6; ppy = 2-phenylpyridine, dtb-bpy = 4,4'-di-tert-butyl-2,2'-dipyridyl). This work is expected to contribute toward the development of long-lasting solar hydrogen-production systems.

Here, ZnFe2 O4 double-shell hollow microspheres are designed to accommodate the large volume expansion during lithiation. A facile and efficient vapor-phase polymerization method has been developed to coat the ZnFe2 O4 hollow spheres with polypyrrole (PPY). The thin PPY coating improves not only the electronic conductivity but also the structural integrity, and thus the cycling stability of the ZnFe2 O4 hollow spheres. Our work sheds light on how to enhance the electrochemical performance of transition metal oxide-based anode materials by designing delicate nanostructures.

OBJECTIVE

The aim of this analysis was to assess healthcare resource utilization in the pivotal phase 3 TOURMALINE-MM1 study of the oral proteasome inhibitor ixazomib or placebo plus lenalidomide and dexamethasone (Rd) in relapsed and/or refractory multiple myeloma (RRMM).

METHODS

In this double-blind, placebo-controlled, randomized study (NCT01564537), 722 patients with RRMM following 1-3 prior lines of therapy received Rd plus ixazomib (ixazomib-Rd; n = 360) or matching placebo (placebo-Rd; n = 362) until disease progression or unacceptable toxicity. Healthcare resource utilization data were captured on Day 1 of each 28-day cycle, every 4 weeks during follow-up for progression-free survival, and every 12 weeks during subsequent follow-up, and included medical encounters (length of stay, inpatient, outpatient, and reason) and number of missing days from work or other activities for patients and caregivers.

RESULTS

Exposure-adjusted rates of hospitalization were similar between the ixazomib-Rd and placebo-Rd arms, at 0.530 and 0.564 per patient year (ppy), respectively, as were outpatient visit rates (3.305 and 3.355 ppy). Mean length of hospitalization per patient was 10.0 and 10.8 days, respectively. In both arms, hospitalization and outpatient visit rates were higher in patients with two or three prior lines of treatment (ixazomib-Rd: 0.632 and 3.909 ppy; placebo-Rd: 0.774 and 3.539 ppy) compared with patients with one prior line (ixazomib-Rd: 0.460 and 2.888 ppy; placebo-Rd: 0.436 and 3.243 ppy). Patients and their caregivers who missed any work or other activity missed a median of 7 and 5 days in the ixazomib-Rd arm, respectively, vs 8 and 4 days with placebo-Rd.

CONCLUSIONS

The study was not powered for a statistical comparison of healthcare resource utilization between treatment arms, nor did it capture costs associated with utilization of the identified healthcare resources.

CONCLUSIONS

This pre-specified analysis demonstrated that the all-oral triplet regimen of ixazomib added to Rd did not increase healthcare resource utilization compared with placebo-Rd.

A series of [(C^N)2 Ir(acac)] complexes [{5-(2-R-CB)ppy}2 Ir(acac)] (3 a-3 g; acac=acetylacetonate, CB=o-carboran-1-yl, ppy=2-phenylpyridine; R=H (3 a), Me (3 b), iPr (3 c), iBu (3 d), Ph (3 e), CF3 C6 H4 (3 f), C6 F5 (3 g)) with various 2-R-substituted o-carboranes at the 5-position in the phenyl ring of the ppy ligand were prepared. X-ray diffraction studies revealed that the carboranyl CC bond length increases with increasing steric and electron-withdrawing effects from the 2-R substituents. Although the absorption and emission wavelengths of the complexes are almost invariant to the change of 2-R group, the phosphorescence quantum efficiency varies from highly emissive (ΦPL ≈0.80 for R=H, alkyl) to poorly emissive (R=aryl) depending on the 2-R group and the polarity of the medium. Theoretical studies suggest that 1) the almost nonemissive nature of the 2-aryl-substituted complexes is mainly attributable to the large contribution to the LUMO in the S1 excited state from an o-carborane unit and 2) the variation in the CC bond length between the S0 and T1 state structures increases with increasing steric (2-alkyl) and electronic effects (2-aryl) of the 2-R substituent and the polarity of the solvent. The solution-processed electroluminescence (EL) devices that incorporated 3 b and 3 d as emitters displayed higher performance than the device based on the parent [(ppy)2 Ir(acac)] complex. Along with the high phosphorescence efficiency, the bulkiness of the 2-R-o-carborane unit is shown to play an important role in improving device performance.

Chromosomal changes through pericentric inversions play an important role in the origin of species. Certain pericentric inversions are too minute to be detected cytogenetically, thus hindering the complete reconstruction of hominoid phylogeny. The advent of the fluorescence in situ hybridization (FISH) technique has facilitated the identification of many chromosomal segments, even at the single gene level. Therefore the cosmid probe for Prader-Willi (PWS)/Angelman syndrome to the loci on human chromosome 15 [q11-13] is being used as a marker to highlight the complementary sequence in higher primates. We hybridized metaphase chromosomes of chimpanzee (PTR), gorilla (GGO), and orangutan (PPY) with this probe (Oncor) to characterize the chromosomal segments because the nature of these pericentric inversions remains relatively unknown. Our observations suggest that a pericentric inversion has occurred in chimpanzee chromosome (PTR 16) which corresponds to human chromosome 15 at PTR 16 band p11-12, while in gorilla (GGO 15) and orangutan (PPY 16) the bands q11-13 complemented to human chromosome 15 band q11-13. This approach has proven to be a better avenue to characterize the pericentric inversions which have apparently occurred during human evolution. "Genetic" divergence in the speciation process which occurs through "chromosomal" rearrangement needs to be reevaluated and further explored using newer techniques.

A unique nanoarchitecture has been established involving polypyrrole (PPy) and graphene nanosheets by in situ polymerization. The structural aspect of the nanocomposite has been determined by Raman spectroscopy. Atomic force microscopy reveals that the thickness of the synthesized graphene is ∼ 2 nm. The dispersion of the nanometer-sized PPy has been demonstrated through transmission electron microscopy and the electrochemical performance of the nanocomposite has been illustrated by cyclic voltammetry measurements. Graphene nanosheet serves as a support material for the electrochemical utilization of PPy and also provides the path for electron transfer. The specific capacitance value of the nanocomposite has been determined to be 267 F g(-1) at a scan rate of 100 mV s(-1) compared to 137 mV s(-1) for PPy, suggesting the possible use of the nanocomposite as a supercapacitor electrode. After 500 cycles, only 10% decrease in specific capacitance as compared to initial value justifies the improved electrochemical cyclic stability of the nanocomposite.

In this work, composite nanoparticles containing polypyrrole, silver and attapulgite (PPy/Ag/ATP) were prepared via UV-induced dispersion polymerization of pyrrole using ATP clay as a templet and silver nitrate as photoinitiator. The effects of ATP concentration on morphology, structure and electrical conductivity were studied. The obtained composite nanoparticles with an interesting beads-on-a-string morphology can be obtained in a short time (10 min), which indicates the preparation method is facile and feasible. To explore the potential applications of the prepared PPy/Ag/ATP composite nanoparticles, they were served as multifunctional filler and blended with poly(butylene succinate) (PBS) matrix to prepare biodegradable composite material. The distribution of fillers in polymer matrix and the interfacial interaction between fillers and PBS were confirmed by scanning electron microscope, elemental mapping and dynamic mechanical analysis. The well dispersed fillers in PBS matrix impart outstanding antibacterial property to the biodegradable composite material as well as enhanced storage modulus due to Ag nanoparticles and ATP clay. The biodegradable composite material also possesses modest surface resistivity (10(6)~ 10(9) Ω/◻).

In this study, a nanocomposite of polypyrrole-coated magnetite nanoparticles (denoted as MNPs/PPy) was prepared and employed as magnetic solid-phase extraction (MSPE) sorbent for extraction of estrogens from milk samples. Because the polypyrrole coating possessed a highly π-conjugated structure and hydrophobicity, MNPs/PPy showed excellent performance for the estrogen extraction. Estrogens could be captured directly by MNPs/PPy from milk samples without protein precipitation. Moreover, the extraction could be carried out within 3 min. Thus, a rapid, simple, and effective method for the analysis of estrogens in milk samples was established by coupling MNPs/PPy-based MSPE with liquid chromatography-tandem mass spectrometry (LC-MS/MS). The limits of detections for estrogens investigated were in the range of 5.1-66.7 ng/L. The recoveries of estrogens (concentration range of 0.5-20 ng/mL) from milk samples were in the range of 83.4-108.5%, with relative standard deviations ranging between 4.2 and 15.4%.

We report detoxification of Cr(VI) into Cr(III) using electrochemically synthesized polyaniline (PANI), polypyrrole (PPY), PANI nanowires (PANI-NW) and palladium-decorated PANI (PANI-Pd) thin films. Percent Cr(VI) reduction was found to be decreased with an increase in pH from 1.8 to 6.8 and with initial Cr(VI) concentration ranging from 2.5 to 10mg/L. Efficacy of PANI increased at higher temp of 37 °C as compared to 30 °C. PANI-Pd was found to be most effective for all three initial Cr(VI) concentrations at pH 1.8. However, efficacy of PANI-Pd was significantly reduced at higher pHs of 5 and 6.8. Efficacy of PANI and PANI-NW was found to nearly the same. However, there was a significant reduction in effectiveness of PANI-NW at 10mg/L of Cr(VI) at all the three pHs studied, which could be attributed to degradation of PANI-NW by higher initial Cr(VI) concentration. PPY and PANI-NW were found to be highly sensitive with respect to pH and Cr(VI) initial concentration. Chromium speciation on PANI film was carried out by total chromium analysis and XPS, which revealed Cr(III) formation and its subsequent adsorption on the polymer. PANI-Pd and PANI are recommended for future sensor applications for chromium detection at low pH.

Extensive efforts have been devoted to improve the anode performance of a microbial fuel cell (MFC) by using modified carbon-based anode materials, but most of them did not recognize that the power performance measured by the commonly-used varying circuit resistance (VCR) or linear sweep voltammetry (LSV) method was overestimated due to the effect of anode capacitance. Here, we examined and compared the transient power and the stationary power of a series of MFCs equipped with the polypyrrole-graphene oxide (PPy-GO)-modified graphite felt anodes. It was found that noticeable transient power was recorded when the VCR or LSV method was chosen for power measurements. Calculations on the contribution of different sources to the measured maximum power density showed that the discharge of bio-electrons stored in the high-capacitance anode was a dominant contributor, especially when the time duration (for the VCR method) was not sufficiently long or the scan rate (for the LSV method) was not sufficiently low. Although anode modification with capacitive materials can result in the increased stationary power obtained from the fed-batch cycle test, owing to the increases in the anode surface area and the number of bacteria attached to anode, the increase in the transient power was more remarkable.