Glass, nitinol, and pyrolytic carbon surfaces were grafted with poly (ethylene oxide) (PEO) and PEO-containing Pluronic surfactants by gamma irradiation. These substrates were coated with a primer layer of trichlorovinylsilane (TCVS), which allows grafting of organic polymers. The TCVS-coated substrates were adsorbed with PEO or Pluronics and exposed to 0.3 Mrad of gamma radiation to graft the polymer to the surface. PEO-grafted substrates were characterized by contact angle measurement, X-ray photoelectron spectroscopy, fibrinogen adsorption, and platelet adhesion and activation. Surface modification with PEO reduced fibrinogen adsorption by as much as 99%. Platelet adhesion was significnatly reduced or prevented on the modified surfaces. Protein- and platelet-resistance effects were independent of hydrophilicity of the PEO-grafted surfaces. Polymer grafting by gamma radiation to TCVS-coated substrates provides a facile process to improve thromboresistance of inorganic biomaterials.

In the present work, molecular dynamics (MD) simulation was applied to study the solubility of two water-insoluble drugs, fenofibrate and nimodipine, in a series of micelle-forming PEO-b-PCL block copolymers with combinations of blocks having different molecular weights. The solubility predictions based on the MD results were then compared with those obtained from solubility experiments and by the commonly used group contribution method (GCM). The results showed that Flory-Huggins interaction parameters computed by the MD simulations are consistent with the solubility data of the drug/PEO-b-PCL systems, whereas those calculated by the GCM significantly deviate from the experimental observation. We have also accounted for the possibility of drug solubilization in the PEO block of PEO-b-PCL.

The penetration of sodium dodecyl sulfate (SDS) into the epidermis was measured using (14)C-radiolabeled SDS. It was found that, at surfactant concentrations that exceed the critical micelle concentration (CMC) of SDS, the concentration of SDS measured in the epidermis increased as the total SDS concentration in the solution contacting the skin increased, thus demonstrating that micellar SDS contributes to the penetration of SDS into the epidermis. The observed SDS dose-dependent response contradicts the widely accepted view that only surfactant monomers penetrate into the skin, while surfactant in micellar form does not contribute to surfactant penetration into the skin. Nevertheless, this finding is consistent with previously unexplained observations of a dose-dependent damage to the skin induced by SDS at concentrations above the CMC. When poly(ethylene oxide) (PEO) was mixed with SDS, SDS micelles bound to PEO did not contribute to the concentration of SDS in the epidermis, while SDS in free SDS micelles did. Dynamic light-scattering measurements revealed an average hydrodynamic radius of 20 A for the SDS micelles, and a larger radius of 25 A for the PEO-bound SDS micelles. A comparison with typical aqueous pore radii in the stratum corneum measured in the literature (10-28 A) suggests that the SDS micelles may be able to penetrate into the skin, while the PEO-bound SDS micelles may be sterically hindered from penetrating into the skin.

A photoresponsive S-(o-nitrobenzyl)-l-cysteine N-carboxyanhydride (NBC-NCA) monomer was for the first time designed, and the related poly(S-(o-nitrobenzyl)-l-cysteine)-b-poly(ethylene glycol) (PNBC-b-PEO) block copolymers were synthesized from the ring-opening polymerization (ROP) of NBC-NCA in DMF solution at 25 °C. Their molecular structures, physical properties, photoresponsive self-assembly, and drug release of PNBC-b-PEO were thoroughly investigated. The β-sheet conformational PNBC block within copolymers presented a thermotropic liquid crystal phase behavior, and the crystallinity of PEO block was progressively suppressed over the PNBC composition. The characteristic absorption peaks of these copolymers at about 310 and 350 nm increased over UV irradiation time and then leveled off, indicating that the o-nitrobenzyl groups were gradually photocleaved from copolymers until the completion of photocleavage. The PNBC-b-PEO copolymers self-assembled into spherical nanoparticles in aqueous solution, presenting a photoresponsive self-assembly behavior, together with a size reduction of nanoparticles after irradiation. The anticancer drug doxorubicin can be released in a controlled manner by changing the light irradiation time, which was induced by gradually photocleaving the PNBC core of nanoparticles. This work provides a facile strategy not only for the synthesis of photoresponsive polypeptide-based block copolymers but also for the fabrication of photoresponsive nanomedicine potential for anticancer therapy.

The uncontrolled aggregation of amorphous calcium phosphate (ACP) particulate fillers and their uneven distribution within polymer matrices can have adverse effects on the properties of ACP composites. In this paper we assessed the influence of non-ionic and anionic surfactants and poly(ethylene oxide) (PEO) introduced during the preparation of ACP on the particle size distribution and compositional properties of ACP. In addition, the mechanical strength of polymeric composites utilizing such fillers with a photo-activated binary methacrylate resin was evaluated. Zirconia-hybridized ACP (Zr-ACP) filler and its corresponding composite served as controls for this study. Surfactant- and PEO-ACPs had an average water content of 16.8 % by mass. Introduction of the anionic surfactant reduced the median particle diameter about 45 % (4.1 μm vs. 7.4 μm for the Zr-ACP control). In the presence of PEO, however, the d(m) increased to 14.1 μm. There was no improvement in the biaxial flexure strength (BFS) in any of the dry composite specimens prepared with the surfactant- and/or PEO-ACPs compared to those formulated with Zr-ACP. The BFS of wet composite specimens decreased by 50 % or more after a month-long exposure to saline solutions. Other types of surfactants and/or polymers as well as alternative surface modification protocols need to be explored for their potential to provide better dispersion of ACP into the matrix resin and better mechanical performance ACP composites.

This study systematically evaluated the surface and corrosion characteristics of commercially pure titanium (grade 2) modified by plasma electrolytic oxidation (PEO) with high current density. The anodization process was carried out galvanostatically (constant current density) using a solution containing calcium glycerophosphate (0.02mol/L) and calcium acetate (0.15mol/L). The current densities applied were 400, 700, 1000 and 1200mA/cm(2) for a period of 15s. Composition, crystalline structure, morphology, roughness, wettability and "in-vitro" bioactivity test in SBF of the anodized layer were evaluated by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, profilometry and contact angle measurements. Corrosion properties were evaluated by open circuit potential, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. The results show that the TiO2 oxide layers present an increase of thickness, porosity, roughness, wettability, Ca/P ratio, and bioactivity, with the applied current density up to 1000mA/cm(2). Corrosion resistance also increases with applied current density. It is observed that for 1200mA/cm(2), there is a degradation of the oxide layer. In general, the results suggest that the anodized TiO2 layer with better properties is formed with an applied current of 1000mA/cm(2).

Conversion of natural biopolymer chitosan into nanofibers through electrospinning has significant usefulness in various biomedical applications, in particular, for constructing a biomimetic and bioactive nanofibrous artificial extracellular matrix for engineering various tissues. Here, we show that introduction of an ultrahigh-molecular-weight poly(ethylene oxide) (UHMWPEO) into aqueous chitosan solutions remarkably enhances the formation of chitosan nanofibrous structure and leads to much lower loading of the water soluble fiber-forming aiding agent of PEO down to 5 wt % as compared to previous high PEO loadings in the electrospun chitosan nanofibers. The excellent electrospinnability of the current formulation renders electrospinning of natural biopolymer chitosan a robust process for large-scale production of practically applicable nanofibrous structures.

Electrospun natural biopolymers are of great interest in the field of regenerative medicine due to their unique structure, biocompatibility, and potential to support controlled release of bioactive agents and/or the growth of cells near a site of interest. The ability to electrospin chitosan and alginate to form polyionic complexed nanofibrous scaffolds was investigated. These nanofibers crosslink in situ during the electrospinning process, and thus do not require an additional chemical crosslinking step. Although poly(ethylene oxide) (PEO) is required for the electrospinning, it can be subsequently removed from the nanofibers simply by incubating in water for a few days, as confirmed by attenuated total reflectance Fourier transform infrared. Solutions that allowed uniform nanofiber formation were found to have viscosities in the range of 0.15-0.7 Pa·s and conductivities below 4 mS/cm for chitosan-PEO and below 2.2 mS/cm for alginate-PEO. The resultant nanofibers both before and after PEO extraction were found to be uniform and on the order of 100 nm as determined by scanning electron microscopy. The dynamic rheological properties of the polymer mixtures during gelation indicated that the hydrogel mixtures with low storage moduli provided uniform nanofiber formation without beaded structures. Increased amounts of chitosan in the PEO-extracted chitosan-alginate nanofibers resulted in a lower swelling ratio. Additionally, these nanofibrous scaffolds exhibit increased cell adhesion and proliferation compared to those made of alginate alone, due to the presence of the chitosan, which promotes the adsorption of serum proteins. Thus, these nanofibrous scaffolds formed purely via ionic complexation without toxic crosslinking agents have great potential for guiding cell behavior in tissue regeneration applications.

Chitosan is an abundantly common, naturally occurring, polysaccharide biopolymer. Its biocompatible, biodegradable, and antimicrobial properties have led to significant research toward biological applications such as drug delivery, artificial tissue scaffolds for functional tissue engineering, and wound-healing dressings. For applications such as tissue scaffolding, formation of highly porous mats of nanometer-sized fibers, such as those fabricated via electrospinning, may be quite important. Previously, strong acidic solvents and blending with synthetic polymers have been used to achieve electrospun nanofibers containing chitosan. As an alternative approach, in this work, polyethylene oxide (PEO) has been used as a template to fabricate chitosan nanofibers by electrospinning in a core-sheath geometry, with the PEO sheath serving as a template for the chitosan core. Solutions of 3 wt % chitosan (in acetic acid) and 4 wt % PEO (in water) were found to have matching rheological properties that enabled efficient core-sheath fiber formation. After removing the PEO sheath by washing with deionized water, chitosan nanofibers were obtained. Electron microscopy confirmed nanofibers of approximately 250 nm diameter with a clear core-sheath geometry before sheath removal, and chitosan nanofibers of approximately 100 nm diameter after washing. The resultant fibers were characterized with IR spectroscopy and X-ray diffraction, and the mechanical and electrical properties were evaluated.

Core-shell structured PEO-chitosan nanofibers have been produced using a coaxial electrospinning setup. PEO and chitosan solutions, both in an aqueous acetic acid solvent, were used as the inner (core) and outer (shell) layer, respectively. Uniform-sized defect-free nanofibers of 150-190 nm diameter were produced. In addition, hollow nanofibers could be obtained subsequent to PEO washing of the membranes. The core-shell nanostructure and existence of chitosan on the shell layer were confirmed by TEM images obtained before and after washing the PEO content with water. The presence of chitosan on the surface of the composite nanofibers was further supported by XPS studies. The chitosan and PEO compositions in the nanofibrous mats were determined by TGA analysis, which were similar to their ratio in the feed solutions. The local compositional homogeneity of the membranes and the efficiency of the washing step to remove PEO were also verified by FTIR. In addition, DSC and XRD were used to characterize the crystalline structure and morphology of the co-electrospun nonwoven mats. The prepared coaxial nanofibers (hollow and solid) have several potential applications due to the presence of chitosan on their outer surfaces.

Chitosan nanoparticles (NC) have excellent capacity for protein entrapment, favorable epithelial permeability, and are regarded as promising nanocarriers for oral protein delivery. Herein, we designed and evaluated a class of core shell corona nanolipoparticles (CSC) to further improve the absorption through enhanced intestinal mucus penetration. CSC contains chitosan nanoparticles as a core component and pluronic F127-lipid vesicles as a shell with hydrophilic chain and polyethylene oxide PEO as a corona. These particles were developed by hydration of a dry pluronic F127-lipid film with NC suspensions followed by extrusion. Insulin nested inside CSC was well protected from enzymatic degradation. Compared with NC, CSC exhibited significantly higher efficiency of mucosal penetration and, consequently, higher cellular internalization of insulin in mucus secreting E12 cells. The cellular level of insulin after CSC treatment was 36-fold higher compared to treatment with free insulin, and 10-fold higher compared to NC. CSC significantly facilitated the permeation of insulin across the ileum epithelia, as demonstrated in an ex vivo study and an in vivo absorption study. CSC pharmacological studies in diabetic rats showed that the hypoglycemic effects of orally administrated CSC were 2.5-fold higher compared to NC. In conclusion, CSC is a promising oral protein delivery system to enhance the stability, intestinal mucosal permeability, and oral absorption of insulin.

When topical controlled delivery of ophthalmic drugs is realised via erodible inserts, drug bioavailability is maximised, if release is controlled exclusively by insert erosion, since parallel mechanisms which increase the release rate, also increases the dose fraction cleared from the precorneal area by tear fluid draining. The respective contributions of diffusion and erosion to the release mechanism of different drugs, namely, prednisolone (PDS), oxytetracycline hydrochloride (OTH) and gentamicin sulfate (GTS), from erodible ocular inserts based on poly(ethylene oxide) (PEO) of molecular weight 400 or 900kDa was determined by an in vitro technique adequate to predict the release mechanism in vivo. PDS and OTH were released with erosion-controlled kinetics. With therapeutic doses of these drugs in the inserts (0.3mg, 1.5%), the possibility of a purely erosive mechanism was shown to rely upon drug-PEO molecular interactions, which limit drug diffusion in the swollen matrix. This was the case with OTH, for which strong interactions with PEO were measured, whereas some contribution from the parallel diffusive mechanism was evidenced for PDS, which showed weaker interactions with polymer. Such a contribution disappeared when the PDS concentration in the insert was increased to 6%, which suggested that the erosive mechanism is favoured by a drug concentration in the hydrated insert substantially higher than solubility. On the other hand, the release of about 50% GTS dose was controlled by diffusion, due to the high water solubility of this drug, accompanied by weak drug-PEO interactions. In this case the residence time of drug in the precorneal area is expected to be significantly shorter than that of the PEO carrier.

Hollow mesoporous one dimensional (1D) TiO(2) nanofibers are successfully prepared by co-axial electrospinning of a titanium tetraisopropoxide (TTIP) solution with two immiscible polymers; polyethylene oxide (PEO) and polyvinylpyrrolidone (PVP) using a core-shell spinneret, followed by annealing at 450 °C. The annealed mesoporous TiO(2) nanofibers are found to having a hollow structure with an average diameter of 130 nm. Measurements using the Brunauer-Emmett-Teller (BET) method reveal that hollow mesoporous TiO(2) nanofibers possess a high surface area of 118 m(2) g(-1) with two types of mesopores; 3.2 nm and 5.4 nm that resulted from gaseous removal of PEO and PVP respectively during annealing. With hollow mesoporous TiO(2) nanofibers as the photoelectrode in dye sensitized solar cells (DSSC), the solar-to-current conversion efficiency (η) and short circuit current (J(sc)) are measured as 5.6% and 10.38 mA cm(-2) respectively, which are higher than those of DSSC made using regular TiO(2) nanofibers under identical conditions (η = 4.2%, J(sc) = 8.99 mA cm(-2)). The improvement in the conversion efficiency is mainly attributed to the higher surface area and mesoporous TiO(2) nanostructure. It facilitates the adsorption of more dye molecules and also promotes the incident photon to electron conversion. Hollow mesoporous TiO(2) nanofibers with close packing of grains and crystals intergrown with each other demonstrate faster electron diffusion, and longer electron recombination time than regular TiO(2) nanofibers as well as P25 nanoparticles. The surface effect of hollow mesoporous TiO(2) nanofibers as a photocatalyst for the degradation of rhodamine dye was also investigated. The kinetic study shows that the hollow mesoporous surface of the TiO(2) nanofibers influenced its interactions with the dye, and resulted in an increased catalytic activity over P25 TiO(2) nanocatalysts.

Phenytoin (Ph), an antiepileptic drug, was reported to exhibit high wound healing activity. However, its limited solubility, bioavailability, and inefficient distribution during topical administration limit its use. Therefore, this study aims to develop new single-dose electrospun nanoparticles-in-nanofibers (NPs-in-NFs) wound dressings that allow a well-controlled release of Ph. These NPs-in-NFs systems are based on enhanced chitosan (CS)/poly(ethylene oxide) (PEO) electrospun nanofibers (NFs) incorporating optimized Ph-loaded nanocarriers. First, a study was conducted to investigate Ph loading efficiency into polymeric nanocarriers of different types; pluronic nanomicelles and poly(lactic-co-glycolic) acids nanoparticles (PLGA NPs). The drug release profile from the nanocarriers was further optimized via lecithin coating. Second, different electrospinning parameters were manipulated to fabricate beads-free homogeneous NFs with optimized polymer ratios. Plain and Ph-loaded nanocarriers were characterized using Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic light scattering (DLS), and scanning electron microscopy (SEM). Both entrapment efficiency of Ph (EE%) and its release profile in phosphate buffer saline (PBS; pH 5.5), simulating the wound environment, were studied. Biodegradability, swelling, vapor permeability, and porosity of the developed Ph-loaded NPs-in-NFs wound dressings were investigated. Morphology of the NPs-in-NFs was also studied using SEM and confocal laser microscopy (CLSM). Besides, the release profiles of Ph from the optimized NPs-in-NFs were assessed. The newly developed wound dressings were evaluated in vitro for their cytotoxicity using human fibroblasts and in vivo using a wound healing mice model. Nanocarriers with particle size ranging from 100 to 180 nm were successfully prepared. All nanocarriers attained a high drug entrapment efficiency exceeding 94% and showed promising sustained release profiles compared to free Ph. Results also demonstrated that NFs incorporating the optimized lecithin-coated Ph-loaded PLGA NPs could be the most promising candidate for efficient wound healing. These NPs-in-NFs systems conferred a well-controlled and sustained release of Ph over 9 days. Moreover, they showed the best re-epithelization and healing quality during the in vivo study with minimal inflammatory and necrotic cells formation.

Biofouling in microfluidic devices limits the type of samples which can be handled and the duration for which samples can be manipulated. Despite the cost of disposing fouled devices, relatively few strategies have been developed to tackle this problem. Here, we have analyzed a series of eight amphiphilic droplet additives, Pluronic coblock polymers of poly(propylene oxide) (PPO) and poly(ethylene oxide) (PEO), as a solution to biofouling in digital microfluidics using serum-containing cell culture media as a model fluid. Our analysis shows that species with longer PPO chains are superior for enabling droplet motion and reducing biofouling. Two of the tested species, L92 and P105, were found to lengthen device lifetimes by 2-3 times relative to additives used previously when used at optimal concentrations. Pluronics with low PEO content such as L92 were found to be cytotoxic to an immortalized mammalian cell line, and therefore we recommend that Pluronic additives with greater or equal to 50% PEO composition, such as P105, be used for digital microfluidic applications involving cells. Finally, contact angle measurements were used to probe the interaction between Pluronic-containing droplets and device surfaces. Strong correlations were found between various types of contact angle measurements and the capacity of additives to reduce biofouling, which suggests that contact angle measurements may be useful as a tool for rapidly screening new candidates for the potential to reduce biofouling. We propose that this study will be useful for scientists and engineers who are developing digital microfluidic platforms for a wide range of applications involving protein-containing solutions, and in particular, for applications involving cells.

A quantitative solid-phase extraction-liquid chromatography/mass spectrometry (SPE-LC/MS) method is described for the simultaneous analysis of halogenated byproducts of alkylphenolic compounds and their degradation products formed during chlorine disinfection in the presence of bromide ions. Compounds analyzed include brominated and chlorinated nonylphenol ethoxylates (XN-PEOs); octylphenol ethoxylates (XOPEOs); nonylphenols (XNP); nonylphenoxycarboxylates (XNPECs) and their precursors nonionic surfactants, alkylphenol ethoxylates (APEOs); and their metabolites formed during sewage treatment, alkylphenoxycarboxylates (APECs) and alkylphenols (APs). Target compounds were concentrated from water samples using a C18 SPE procedure. Extracts were analyzed using reversed phase LC/MS. The performances of both atmospheric pressure chemical ionization (APCI) and electrospray (ESI) interfaces were compared. ESI offered better sensitivity and specificity for a higher range of oligomers. Detection limits (LODs) for water samples were from 20 to 100 ng/L; and for sediment samples, from 2 to 10 microg/kg. Slightly higher LODs were obtained for sludge samples (5-25 microg/kg). Halogenated byproducts were found in sludge from Barcelona drinking water treatment plant in concentrations of 220 microg/kg for BrNP, 430 microg/kg for BrNPEOs (nEO = 1 - 2), and 1600 microg/kg for BrNPEOs (nEO = 3 - 15). The concentration of ClNPEOs was estimated to be in the order of 660 microg/kg (assuming the same response as BrNPEOs). Halogenated OPEOs were also identified, and their concentration was approximately 50 times lower than the concentration of NPEOs analogues. To our knowledge, this is the first method described that allows simultaneous determination of alkyphenol ethoxylates and halogenated derivatives, including degradation products.

A novel antibacterial packaging material was engineered by incorporating cinnamon essential oil/β-cyclodextrin (CEO/β-CD) proteoliposomes into poly(ethylene oxide) (PEO) nanofibers by electrospinning technique. Herein, PEO was a stabilizing polymer and used as electrospinning polymeric matrix for the fabrication of CEO/β-CD proteoliposomes nanofibers. The nanoliposomes were inlaid with protein are defined as proteoliposomes. Taking advantage of bacterial protease secreted from Bacillus cereus (B. cereus), the controlled release of CEO from proteoliposomes was achieved via proteolysis of protein in proteoliposomes. The CEO/β-CD inclusion complex was prepared by the aqueous solution method and characterized by Raman and FTIR spectroscopy. After the treatment of CEO/β-CD proteoliposomes nanofibers packaging, the satisfactory antibacterial efficiency against B. cereus on beef was realized without any impact on sensory quality of beef. This study demonstrated that the CEO/β-CD proteoliposomes nanofibers can significantly extend the shelf life of beef and have potential application in active food packaging.

Several essential oils exert in vitro activity against bacteria and viruses and, among these latter, herpes simplex virus type 1 (HSV-1) is known to develop resistance to commonly used antiviral agents. Thus, the effects of the essential oil derived from Mentha suaveolens (EOMS) and its active principle piperitenone oxide (PEO) were tested in in vitro experimental model of infection with HSV-1. The 50% inhibitory concentration (IC50) was determined at 5.1μg/ml and 1.4μg/ml for EOMS and PEO, respectively. Australian tea tree oil (TTO) was used as control, revealing an IC50 of 13.2μg/ml. Moreover, a synergistic action against HSV-1 was observed when each oil was added in combination with acyclovir. In order to find out the mechanism of action, EOMS, PEO and TTO were added to the cells at different times during the virus life-cycle. Results obtained by yield reduction assay indicated that the antiviral activity of both compounds was principally due to an effect after viral adsorption. Indeed, no reduction of virus yield was observed when cells were treated during viral adsorption or pre-treated before viral infection. In particular, PEO exerted a strong inhibitory effect by interfering with a late step of HSV-1 life-cycle. HSV-1 infection is known to induce a pro-oxidative state with depletion of the main intracellular antioxidant glutathione and this redox change in the cell is important for viral replication. Interestingly, the treatment with PEO corrected this deficit, thus suggesting that the compound could interfere with some redox-sensitive cellular pathways exploited for viral replication. Overall our data suggest that both EOMS and PEO could be considered good candidates for novel anti-HSV-1 strategies, and need further exploration to better characterize the targets underlying their inhibition.

We present a systematic study of the stability and morphology of complex coacervate core micelles (C3Ms) formed from poly(acrylic acid) (PAA) and poly(N-methyl-2-vinylpyridinium)-b-poly(ethylene oxide) (PM2VP-b-PEO). We use polarized and depolarized dynamic and static light scattering, combined with small-angle X-ray scattering, to investigate how the polymer chain length and salt concentration affect the stability, size, and shape of these micelles. We show that C3Ms are formed in aqueous solution below a critical salt concentration, which increases considerably with increasing PAA and PM2VP length and levels off for long chains. This trend is in good agreement with a mean-field model of polyelectrolyte complexation based on the Voorn-Overbeek theory. In addition, we find that salt induces morphological changes in C3Ms when the PAA homopolymer is sufficiently short: from spherical micelles with a diameter of several tens of nanometers at low salt concentration to wormlike micelles with a contour length of several hundreds of nanometers just before the critical salt concentration. By contrast, C3Ms of long PAA homopolymers remain spherical upon addition of salt and shrink slightly. A critical review of existing literature on other C3Ms reveals that the transition from spherical to wormlike micelles is probably a general phenomenon, which can be rationalized in terms of a classical packing parameter for amphiphiles.

Triblock copolymers of polyethylene oxide (PEO) and polypropylene oxide (PPO), that is, PEOn-PPOm-PEOn, better known as Pluronic can adsorb to surfaces in either a pancake or a brushlike configuration. The brushlike configuration is advantageous in numerous applications, since it constitutes a surface repellent to proteins and microorganisms. The conformation of the adsorbed Pluronic layer depends on the hydrophobicity of the substratum surface, but the hydrophobicity threshold above which a brushlike conformation is adopted is unknown. Therefore, the aim of this study is to investigate Pluronic F-127 adsorption on surfaces with different hydrophobicities using a quartz crystal microbalance with dissipation. Adsorption in a brushlike conformation occurred on surfaces with a water contact angle above 80 degrees , as inferred from the thickness, viscosity, and elasticity of the adsorbed layer. The concentration of Pluronic F-127 in solution affected only the kinetics of adsorption and not the final layer thickness or conformation of adsorbed Pluronic molecules.

Diffusing wave spectroscopy has been used to investigate the thermally driven displacement of colloidal particles dispersed in solutions of associating polymers (APs). The effect of varying colloidal probe size on the measured particle displacements is studied in particular. Recent theories of microrheology are examined in light of the observed effects. The associating polymer used in this research was a linear polyethylene oxide (PEO) chain (molecular weight 35 000 g/mole) with a Cl14 aliphatic group appended to each end of the PEO. Above a critical concentration, the associating polymers display linear viscoelasticity consistent with the Maxwell model. The concentration of aqueous AP solutions was varied from 0.25 to 4.0 wt. %. At low concentration of APs, the mean square displacement of the colloidal beads was indistinguishable from simple Brownian diffusion in the aqueous solvent. However, at concentrations greater than 0.5 wt. %, the mean square displacement differed from simple diffusion in a way that was found to be consistent with the Maxwell model linear viscoelasticity (LVE) of the AP solutions. Significantly, for the most concentrated solutions, as the probe particle size was varied from 0.3 to 2.2 microm, the observed mean square displacement deviated substantially from the generalized Stokes-Einstein behavior predicted by microrheological theories. Our experiments showed that these deviations could not be attributed to specific physicochemical interactions at the probe-matrix interface, since observed mean square displacements were independent of different probe surface chemistries studied. Moreover, this particle size effect was not observed in semidilute, high molecular weight PEO solutions (molecular weight 4.0 x 10(6) g/mole). We concluded that possible effects of AP network compressibility and AP depletion at the probe surface could not account for the observed particle size effects. We examined recent reports of the structural heterogeneity in AP solutions for their possible connection to our observation of the breakdown of the generalized Stokes-Einstein equation for this system. Numerical conversion of the microscopic results to the linear viscoelastic moduli, G'(omega) and G"(omega), by means of a constrained regularization method (CONTIN), demonstrates that the experiments with larger probe particles are most consistent with the single-mode Maxwell model LVE observed by macroscopic mechanical rheology.

The present study aims at optimizing dermal fibroblast seeding and cultivation in Polyactive scaffolds in order to limit the biopsy size needed for autologous treatment of full-thickness skin defects and chronic wounds. Three methods for seeding and cultivation of fibroblasts in porous scaffolds were compared: dynamic seeding followed by static cultivation (DS), static seeding followed by static cultivation (SS) and dynamic seeding followed by dynamic cultivation (DD). Human dermal fibroblasts isolated from cultured explants were seeded in porous PEO/PBT (Polyactive) scaffolds. Samples were taken from 6 h to 21 days post-seeding for both histological analysis (cell distribution and extracellular matrix (ECM) formation), and quantitative cell number assay. The seeding efficiency 24 h post-seeding was 76% (+/-3.6%) for dynamically seeded matrices, whereas it was only 30% (+/-5%) for statically seeded matrices (p<0.001). ECM formation was abundant in DS samples already at day 10, while even after 21 days ECM formation was less pronounced in SS samples. Surprisingly, cells detached from DD samples as aggregates, starting from day 10. Cell numbers as assayed quantitatively correlated with the histological results. At all timepoints cell numbers found for DS samples were significantly higher as compared to SS samples. At day 21, DS samples contained approximately twofold more cells as compared to SS and DD samples and comprised ECM consisting of collagen types I and III. Our results indicate that the combination of dynamic seeding and static cultivation assures efficient utilization of isolated fibroblasts and improved neodermis formation, thereby allowing a reduction in the skin biopsy size needed for the engineering of living skin substitute.

The poly-L/D-lactide 96/4 joint scaffolds are used to engineer fibrous tissue joints in situ for the reconstruction of metacarpophalangeal joints. In this experimental study, a supplementary elastomeric stem made of Polyactive 1000<em>PEO</em>70PBT30 (a segmented block copolymer of polyethylene oxide and polybutylene terephtalate with 70/30 <em>PEO</em>/PBT ratio) was used to anchor the joint scaffold in the arthroplasty space. Eleven resected fifth metacarpophalangeal joints of minipig were reconstructed and evaluated radiologically and histologically for 3 years. Plain joint scaffold and Swanson silicone implant arthroplasties (11 of each) in metacarpophalangeal joints of minipig served as controls. Altogether fore limbs of eighteen minipigs were operated for the study. Deleterious tissue reaction with dramatic signs of osteolysis and inflammatory foreign-body reaction was observed around the Polyactive stems. The mean maximum diameter of the osteolytic stem cavity was statistically wider when compared to the mean maximum diameter of Swanson implant group during the first postoperative year. Numerous osteoclasts were found at the margins of the osteolytic areas. No direct bone contact could be seen. At 1 year osteoblastic regeneration and formation of new trabecular bone followed. Finally the foreign-body reaction settled, but the adjoining bones were at this stage highly sclerotic and composed of coarse trabeculae. In contrary to previous in vivo studies suggesting biocompatibility, osteoconductivity and capability to bond to bone, Polyactive 1000<em>PEO</em>70PBT30 stem in this setting caused massive osteolytic lesions and foreign-body reactions.

Micelle formation was followed by micro-DSC and rheology for aqueous solutions of two copolymers of PEO-PPO-PEO, the Pluronic F127 (from BASF) and the EG56 (from PolymerExpert), a branched copolymer built with three chains of F127 type. It is shown that micellization is endothermic and that, for both polymers, the enthalpy of formation/melting is proportional to total concentration. The rheology of the solutions was carefully analyzed, before gelation for F127, and it reveals firstly the progressive changes of solubility of the unimers (decease of relative solution viscosity), followed by micelle formation over a 10 degrees C range. In this range, the micelle concentration dependence on temperature was deduced from enthalpy measurements and the corresponding volume fractions were derived. Viscosity was interpreted within the framework of well-known theories for hard sphere suspensions (Krieger-Dougherty or Quemada) based on an analogy between micelles and nanosized hairy grain suspensions. The gel state is achieved due to formation of the colloidal crystal. For EG56, the rheology is quite different; as the aggregation increases with temperature, a progression is observed from Newtonian to visco-elastic liquid. The characteristic frequency, defined by the relation G(') = G(''), for EG56 varies with temperature and the corresponding times increase by two orders of magnitude according to an Arrhenius law. The frequency dependence of G(') and G('') at different temperatures can be superposed with a horizontal shift factor and a small amplitude adjustment. There is no elastic solid formation in this case. The "gelation" of these two copolymers is compared to the physical gelation of cold-set gels (gelatin).