Combination therapy as a novel strategy with the combination of photothermal therapy and chemotherapy (photothermal-chemotherapy) has aroused the tremendously increasing interest owing to the synergistic therapeutic effect on destroying cancer cells because the hyperthermia generated from photothermal therapy can promote drug delivery into tumors, which would highly increase therapeutic efficacy as compared to those sole treatments. Herein, we fabricated a novel nanomaterial-based carrier composed of gold nanorods (GNRs), polypyrrole (PPy), and mesoporous silica to form GNRs/PPy/m-SiO2 core/shell hybrids. After loading the anticancer drug of doxorubicin (DOX), the photothermal effect and the drug-release behavior of GNRs/PPy@m-SiO2-DOX hybrids were investigated. The in vitro and in vivo near-infrared (NIR) photothermal-chemotherapy were also revealed. The results indicated that the NIR-induced photothermal effect was beneficial to promote the release of the drug. In addition, combination therapy demonstrated the enhanced synergistic efficacy and excellent treatment efficacy for cancer therapy.

Recently, Injectable Conducting Hydrogel (ICH) systems have gained much attention for tissue engineering and regenerative medicine. These systems can promote the regeneration of tissues responding to electrical responses. In this study, a novel ICH system was introduced. To achieve this system, firstly, a soluble non-toxic polypyrrole (PPy) synthesized by grafting pyrrole on alginate (Alg) backbone (Alg-graft-PPy), and then, ICH systems were prepared by the given ratios of Alg-graft-PPy, Alg, and collagen (Col). Three different amounts of Col (0.5, 1, and 1.5 mg/ml) were added to the system including Alg-graft-PPy: Alg wt. % with the ratios of 20:80 and 30:70. FTIR spectroscopy, electrical conductivity, viscosity, syringeability, gelation time, and MTT assay were performed in order to characterize the produced hydrogels. Due to the rheological behavior of 20:80 (Alg-graft-PPy: Alg wt. %), it was recognized more suitable to inject. Also this system associated with 0.5 mg/ml Col introduced as the best sample with respect to its viscosity and injectability. This ICH system has shown high conductivity in addition to a good level of cell viability and syringeability. With respect to properties of the produced ICH system, it can be applied for bone, nerve, muscle and cardiac cells, which respond to electrical impulses.

Metal-to-ligand charge-transfer sensitized upconverted fluorescence in noncovalent triplet energy transfer assemblies is investigated using Ir(ppy)3 as the sensitizer (ppy=2-phenylpyridine) and pyrene or 3,8-di-tert-butylpyrene as the triplet acceptor/annihilator. Upconverted singlet fluorescence from pyrene or 3,8-di-tert-butylpyrene resulting from triplet-triplet annihilation (TTA) is observed following selective excitation of Ir(ppy)3 in deaerated dichloromethane solutions using 450-nm laser pulses. In both systems, the TTA process is confirmed by the near quadratic dependence of the upconverted fluorescence intensity on incident light power, measured by integrating the upconverted delayed fluorescence kinetic traces as a function of incident excitation power. At the relatively high concentrations of pyrene that were utilized, pyrene excimer formation was detected by its characteristic broad emission centered near 470 nm. In essence, selective excitation of Ir(ppy)3 ultimately resulted in the simultaneous sensitization of both singlet pyrene and pyrene excimers, and the latter degrades the energy stored in the pyrene singlet excited state. Furthermore, in the case of di-tert-butylpyrene/Ir(ppy)3, the formation of excimers is successfully blocked because of the presence of the sterically hindering tert-butyl groups. The current work demonstrates that sensitized TTA is indeed accessible to chromophore systems beyond those previously reported, suggesting the generality of the approach.

Knowledge of the kinetic behavior of catalysts under synthetically relevant conditions is vital for the efficient use of compounds that mediate important transformations regardless of their composition or driving force. In particular, these data are of great importance to add perspective to the growing number of applications of photoactive transition metal complexes. Here we present kinetic, synthetic, and spectroscopic evidence of the mechanistic behavior of fac-Ir(ppy)3 in a visible light-mediated radical addition to 3-methylindole, demonstrating the instability of fac-Ir(ppy)3 under these conditions. During the reaction, rapid in situ functionalization of the photocatalyst occurs, eventually leading to deactivation. These findings demonstrate a conceivable deactivation process for catalytic single electron reactions in the presence of radicophilic ligands. Attempts to inhibit photocatalyst deactivation through structural modification provide further insight into catalyst selection for a given system of interest.

A new class of cyclometalated tetradentate platinum complexes of the type Pt[N(/\)C-O-LL'] was synthesized and characterized. N(/\)C is a cyclometalating ligand such as phenyl-pyrazole (ppz), phenyl-methylimidazole (pmi), or phenyl-pyridine (ppy), and LL' is an ancillary ligand such as phenoxyl-pyridine (popy). The complexes in this series are highly luminescent, emitting blue to green light in solution with quantum efficiencies ranging from 0.39 to 0.64 and luminescent lifetimes from 2 to 9 μs. When doped in a poly(methyl methacrylate) (PMMA) thin film, measured quantum efficiencies increase to 0.81-0.97 with lifetimes ranging from 4.5-10.4 μs. One notable example, the metal complex PtOO3, emits green light with a luminescent quantum efficiency approaching 100% and achieves approximately 100% electron-to-photon conversion efficiency in device settings.

Structural color with wide viewing angles has enormous potential applications in pigment, ink formulation, displays, and sensors. However, colors obtained from colloidal assemblies with low refractive index contrast or without black additives typically appear pale. Here, we prepare polypyrrole (PPy) black coated polystyrene (PS) nanoparticles and demonstrate well-defined colors with high color contrast and wide viewing angles under ambient light. Depending on the loading of pyrrole during polymerization, PPy nanogranules of different sizes and coverages are grafted to the surface of PS nanoparticles. The bumpy particles can self-assemble into quasi-amorphous arrays, resulting in low angle dependent structure colors under ambient light. The color can be tuned by the size of the PS nanoparticles, and the presence of the PPy black on PS nanoparticles enhances the color contrast by suppressing incoherent and multiple scattering.

Electrospun nanofibrous nerve implants is a promising therapy for peripheral nerve injury, and its performance can be tailored by chemical cues, topographical features as well as electrical properties. In this paper, a surface modified, electrically conductive, aligned nanofibrous scaffold composed of poly (lactic acid) (PLA) and polypyrrole (Ppy), referred to as o-PLAPpy_A, was fabricated for nerve regeneration. The morphology, surface chemistry and hydrophilicity of nanofibers were characterized by Scanning Electron Microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and water contact angle, respectively. The effects of these nanofibers on neuronal differentiation using PC12 cells were evaluated. A hydrophilic surface was created by Poly-ornithine coating, which was able to provide a better environment for cell attachment, and furthermore aligned fibers were proved to be able to guide PC12 cells grow along the fiber direction and be beneficial for neurite outgrowth. The cellular response of PC12 cells to pulsed electrical stimulation was evaluated by NF 200 and alpha tubulin expression, indicating that electrical stimulation with a voltage of 40mV could enhance the neurite outgrowth. The PC12 cells stimulated with electrical shock showed greater level of neurite outgrowth and smaller cell body size. Moreover, the PC12 cells under electrical stimulation showed better viability. In summary, the o-PLAPpy_A nanofibrous scaffold supported the attachment, proliferation and differentiation of PC12 cells in the absence of electrical stimulation, which could be potential candidate for nerve regeneration applications.

Natural nerve tissue is composed of nerve bundles with multiple aligned assembles, and matrix electroconductivity is beneficial to the transmission of intercellular electrical signals, or effectively deliver external electrical cues to cells. Herein, aiming at the biomimetic design of the extracellular matrix for neurons, we first synthesized electroconductive polypyrrole (PPy) nanoparticles with modified hydrophilicity to improve their uniformity in collagen hydrogel. Next, cell-laden collagen-PPy hybrid hydrogel microfibers with highly oriented microstructures were fabricated via a microfluidic chip. The hydrogel microfibers formed a biomimetic three-dimensional microenvironment for neurons, resulting from the native cell adhesion domains, oriented fibrous structures, and conductivity. The oriented fibrous microstructures enhanced neuron-like cells aligning with fibers' axon; the matrix conductivity improved cell extension and upregulated neural-related gene expression; moreover, external electrical stimulation further promoted the neuronal functional expression. This mechanism was attributed to the electroconductive matrix and its delivered electrical stimulation to cells synergistically upregulated the expression of an L-type voltage-gated calcium channel, resulting in an increase in the intracellular calcium level, which in turn promoted neurogenesis. This approach has potential in constructing the biomimetic microenvironment for neurogenesis.

Direct C-H functionalization of various enamides and enecarbamates was realized through visible-light photoredox catalyzed reactions. Under the optimized conditions using [Ir(ppy)(2)(dtbbpy)PF(6)] as photocatalyst in combination with Na(2)HPO(4), enamides such as N-vinylpyrrolidinone could be easily functionalized by irradiation of the reaction mixture overnight in acetonitrile with visible light. The scope of the reaction with respect to enamide and enecarbamate substrates by using diethyl 2-bromomalonate for the alkylation reaction was explored, followed by an investigation of the scope of alkylating reagents used to react with the enamides and enecarbamates. The results indicated that reaction takes place with quite broad substrate scope, however, tertiary enamides with an internal C=C double bond in the E configuration could not be alkylated. Alkylation of N-vinyl tertiary enamides and enecarbamates gave monoalkylated products exclusively in the E configuration. Alkylation of N-vinyl secondary enamides gave doubly alkylated products. Double bond migration was observed in the reaction of electron-deficient bromides such as 3-bromoacetyl acetate with N-vinylpyrrolidinone. A mechanism is proposed for the reaction that is different from reported reactions of SOMOphiles with a nonfunctionalized C=C double bond. Further tests on the trifluoromethylation and arylation of enamides and enecarbamates under similar conditions showed that the reactions could serve as a mild, practical, and environmentally friendly approach to various functionalized enamides and enecarbamates.

A voltammetric sensor for (-)-ephedrine has been prepared by a novel approach based on immobilisation of an imprinted polymer for ephedrine (MIPE) in an electrosynthesised polypyrrole (PPY) film. Composite films were grown potentiostatically at 1.0 V vs. Pt (QRE) on a glassy carbon electrode using an unconventional "upside-down" (UD) geometry for the three-electrode cell. As a consequence, a high MIP loading was obtained, as revealed by SEM. The sensor response was evaluated, after overoxidation of PPY matrix, by cyclic voltammetry after pre-concentration in a buffered solution of analyte in 0.5-3 mM concentration range. An ephedrine peak at approximately 0.9 V increasing with concentration and saturating at high concentrations was evident. PPY-modified electrode showed a response, which was distinctly lower than the MIP response for the same concentration of the template. The effect of potential interferences including compounds usually found in human fluids (ascorbic acid, uric acid, urea, glucose, sorbitol, glycine, dopamine) was examined.

A surface modification of interdigitated gold microelectrodes (IDEs) with a doped polypyrrole (PPy) film for detection of dopamine released from populations of differentiated PC12 cells is presented. A thin PPy layer was potentiostatically electropolymerized from an aqueous pyrrole solution onto electrode surfaces. The conducting polymer film was doped during electropolymerization by introducing counter-ions in the monomer solution. Several counter-ions were tested and the resulting electrode modifications were characterized electrochemically to find the optimal dopant that increases sensitivity in dopamine detection. Overoxidation of the PPy films was shown to contribute to a significant enhancement in sensitivity to dopamine. The changes caused by overoxidation in the electrochemical behavior and electrode morphology were investigated using cyclic voltammetry and SEM as well as AFM, respectively. The optimal dopant for dopamine detection was found to be polystyrene sulfonate anion (PSS(-)). Rat pheochromocytoma (PC12) cells, a suitable model to study exocytotic dopamine release, were differentiated on IDEs functionalized with an overoxidized PSS(-)-doped PPy film. The modified electrodes were used to amperometrically detect dopamine released by populations of cells upon triggering cellular exocytosis with an elevated K(+) concentration. A comparison between the generated current on bare gold electrodes and gold electrodes modified with overoxidized doped PPy illustrates the clear advantage of the modification, yielding 2.6-fold signal amplification. The results also illustrate how to use cell population based dopamine exocytosis measurements to obtain biologically significant information that can be relevant in, for instance, the study of neural stem cell differentiation into dopaminergic neurons.

Polypyrrole (PPy) is a conducting polymer that enables controlled drug release upon electrical stimulation. We characterized the biocompatibility of PPy with human primary osteoblasts, and the effect of dopants. We investigated the biocompatibility of PPy comprising various dopants, i.e. p-toluene sulfonate (PPy-pTS), chondroitin sulfate (PPy-CS), or dodecylbenzenesulfonate (PPy-DBS), with human primary osteoblasts. PPy-DBS showed the roughest appearance of all surfaces tested, and its wettability was similar to the gold-coated control. The average number of attached cells was 45% higher on PPy-DBS than on PPy-CS or PPy-pTS, although gene expression of the proliferation marker Ki-67 was similar in osteoblasts on all surfaces tested. Osteoblasts seeded on PPy-DBS or gold showed similar vinculin attachment points, vinculin area per cell area, actin filament structure, and Feret's diameter, while cells seeded on PPY-CS or PPY-pTS showed disturbed focal adhesions and were enlarged with disorganized actin filaments. Osteoblasts grown on PPy-DBS or gold showed enhanced alkaline phosphatase activity and osteocalcin gene expression, but reduced osteopontin gene expression compared to cells grown on PPy-pTS and PPy-CS. In conclusion, PPy doped with DBS showed excellent biocompatibility, which resulted in maintaining focal adhesions, cell morphology, cell number, alkaline phosphatase activity, and osteocalcin gene expression. Taken together, conducting polymers doped with DBS are well tolerated by osteoblasts. Our results could provide a basis for the development of novel orthopedic or dental implants with controlled release of antibiotics and pharmaceutics that fight infections or focally enhance bone formation in a tightly controlled manner.

The combination of stem cell therapy with a supportive scaffold is a promising approach to improving cardiac tissue engineering. Stem cell therapy can be used to repair nonfunctioning heart tissue and achieve myocardial regeneration, and scaffold materials can be utilized in order to successfully deliver and support stem cells in vivo. Current research describes passive scaffold materials; here an electroactive scaffold that provides electrical, mechanical, and topographical cues to induced human pluripotent stem cells (iPS) is presented. The poly(lactic-co-glycolic acid) fiber scaffold coated with conductive polymer polypyrrole (PPy) is capable of delivering direct electrical and mechanical stimulation to the iPS. The electroactive scaffolds demonstrate no cytotoxic effects on the iPS as well as an increased expression of cardiac markers for both stimulated and unstimulated protocols. This study demonstrates the first application of PPy as a supportive electroactive material for iPS and the first development of a fiber scaffold capable of dynamic mechanical actuation.

We have designed here a label-free direct electrochemical immunosensor for the detection of cytochrome c (cyt c), a heme containing metalloprotein using its specific monoclonal antibody. Two nanocomposite-based electrochemical immunosensor platforms were evaluated for the detection of cyt c; (i) self-assembled monolayer (SAM) on gold nanoparticles (GNP) in polypyrrole (PPy) grafted screen printed electrodes (SPE) and (ii) carbon nanotubes (CNT) integrated PPy/SPE. The nanotopologies of the modified electrodes were confirmed by scanning electron microscopy. Electrochemical impedance spectroscopy and cyclic voltammetry were employed to monitor the stepwise fabrication of the nanocomposite immunosensor platforms. In the present method, the label-free quantification of cyt c is based on the direct electron transfer between Fe (III)/Fe (II)-heme redox active site of cyt c selectively bound to anti-cyt c nanocomposite modified SPE. GNP/PPy and CNT/PPy nanocomposites promoted the electron transportation through the conductive pore channels. The overall analytical performance of GNP/PPy based immunosensor (detection limit 2 nM; linear range: 2 nM to 150 µM) was better than the anti-cyt c/CNT/PPy (detection limit 10 nM; linear range: 10 nM to 50 µM). Further, the measurement of cyt c release in cell lysates of cardiomyocytes using the GNP/PPy based immunosensor gave an excellent correlation with standard ELISA.

A new sensing area for a sensor based on surface plasmon resonance (SPR) was fabricated to detect trace amounts of mercury and lead ions. The gold surface used for SPR measurements were modified with polypyrrole-chitosan (PPy-CHI) conducting polymer composite. The polymer layer was deposited on the gold surface by electrodeposition. This optical sensor was used for monitoring toxic metal ions with and without sensitivity enhancement by chitosan in water samples. The higher amounts of resonance angle unit (ΔRU) were obtained for PPy-CHI film due to a specific binding of chitosan with Pb(2+) and Hg(2+) ions. The Pb(2+) ion bind to the polymer films most strongly, and the sensor was more sensitive to Pb(2+) compared to Hg(2+). The concentrations of ions in the parts per million range produced the changes in the SPR angle minimum in the region of 0.03 to 0.07. Data analysis was done by Matlab software using Fresnel formula for multilayer system.

A novel electrochemical biosensor based on functional composite nanofibers for sensitive hybridization detection of p53 tumor suppressor using methylene blue (MB) as an electrochemical indicator is developed. The carboxylated multi-walled carbon nanotubes (MWNTs) doped nylon 6 (PA6) composite nanofibers (MWNTs-PA6) was prepared using electrospinning, which served as the nanosized backbone for pyrrole (Py) electropolymerization. The functional composite nanofibers (MWNTs-PA6-PPy) used as supporting scaffolds for ssDNA immobilization can dramatically increase the amount of DNA attachment and the hybridization sensitivity. The biosensor displayed good sensitivity and specificity. The target wild type p53 sequence (wtp53) can be detected as low as 50 fM and the discrimination is up to 57.5% between the wtp53 and the mutant type p53 sequence (mtp53). It holds promise for the early diagnosis of cancer development and monitoring of patient therapy.

A novel electrochemical biosensor based on functionalized polypyrrole (PPy) nanotube arrays modified with a tripeptide (Gly-Gly-His) proved to be highly effective for electrochemical analysis of copper ions (Cu(2+)). The vertically oriented PPy nanotube arrays were electropolymerized by using modified zinc oxide (ZnO) nanowire arrays as templates which were electrodeposited on indium-tin oxide (ITO) coated glass substrates. The electrodes were functionalized by appending pyrrole-α-carboxylic acid onto the surface of polypyrrole nanotube arrays by electrochemical polymerization. The carboxylic groups of the polymer were covalently coupled with the amine groups of the tripeptide, and its structural features were confirmed by attenuated total reflection infrared (ATR-IR) spectroscopy. The tripeptide modified PPy nanotube arrays electrode was used for the electrochemical analysis of various trace copper ions by square wave voltammetry. The electrode was found to be highly sensitive and selective to Cu(2+) in the range of 0.1-30 μM. Furthermore, the developed biosensor exhibited a high stability and reproducibility, despite the repeated use of the biosensor electrode.

A surface acoustic wave sensor operating at 104 MHz and functionalized with a polypyrrole molecularly imprinted polymer has been designed for selective detection of dopamine (DA). Optimization of pyrrole/DA ratio, polymerization and immersion times permitted to obtain a highly selective sensor, which has a sensitivity of 0.55°/mM (≈ 550 Hz/mM) and a detection limit of ≈ 10 nM. Morphology and related roughness parameters of molecularly imprinted polymer surfaces, before and after extraction of DA, as well as that of the non imprinted polymer were characterized by atomic force microscopy. The developed chemosensor selectively recognized dopamine over the structurally similar compound 4-hydroxyphenethylamine (referred as tyramine), or ascorbic acid,which co-exists with DA in body fluids at a much higher concentration. Selectivity tests were also carried out with dihydroxybenzene, for which an unexpected phase variation of order of 75% of the DA one was observed. Quantum chemical calculations, based on the density functional theory, were carried out to determine the nature of interactions between each analyte and the PPy matrix and the DA imprinted PPy polypyrrole sensing layer in order to account for the important phase variation observed during dihydroxybenzene injection.

The use of intrinsically conducting polymers (CPs) in wound care and skin tissue engineering presents a novel opportunity for accelerated wound healing, enhanced antibacterial activity and the potential for controlled drug delivery. Through their increased electrical conductivity, CPs can facilitate the application of electrical stimulation directly to the wound area, which has been linked to faster wound healing. The release of drugs or biological agents to the wound site can likewise be modulated through the use of an external electrical stimuli. This review thus summarises the available literature regarding the use of CPs for wound healing and skin tissue engineering applications, in particular the most common CPs, polyaniline (PANI), polypyrrole (PPy), polythiophene (PTh) and their derivates, including poly(3,4-ethylenedioxythiophene) (PEDOT). Results indicated that PANI and PPy, two CPs that have been most extensively studied across a range of applications, including biological, were also most frequently used in wound dressings and hydrogels. PPy was most commonly applied to skin tissue scaffolds. CPs were also frequently combined with biomolecules or biocompatible polymers via doping, the formation of composites, co-polymerisation or blending in order to improve their biocompatibility and physical properties. Overall, CPs offer much potential in terms of promoting enhanced wound healing and in skin tissue engineering.

Nitrogen-doped graphene oxide sheets (N-GOs) are prepared by employing N-containing polymers such as polypyrrole, polyaniline, and copolymer (polypyrrole-polyaniline) doped with acids such as HCl, H₂SO₄, and C₆H₅-SO₃-K, which are activated using different concentrations of KOH and carbonized at 650 °C; characterized using SEM, TEM, BET, TGA-DSC, XRD, and XPS; and employed for the removal of environmental pollutant CO₂. The porosity of the N-GOs obtained were found to be in the range 1-3.5 nm when the KOH employed was in the ratio of 1:4, and the XRD confirmed the formation of the layered like structure. However, when the KOH employed was in the ratio of 1:2, the pore diameter was found to be in the range of 50-200 nm. The SEM and TEM analysis reveal the porosity and sheet-like structure of the products obtained. The nitrogen-doped graphene oxide sheets (N-GOs) prepared by employing polypyrrole doped with C₆H₅-SO₃-K were found to possess a high surface area of 2870 m²/g. The N-GOs displayed excellent CO₂ capture property with the N-GOs; PPy/Ar-1 displayed ~1.36 mmol/g. The precursor employed, the dopant used, and the activation process were found to affect the adsorption property of the N-GOs obtained. The preparation procedure is simple and favourable for the synthesis of N-GOs for their application as adsorbents in greenhouse gas removal and capture.

3D bio-nanofibrous polypyrrole/poly(styrene-beta-isobutylene-beta-styrene) mats, prepared via a vapor-phase polymerisation modified electrospinning process, provide excellent platforms for PC12 cells attachment and growth, indicating potential applications in areas requiring good mass transport such as nerve growth guidance channels.

Photothermal therapy using inorganic nanoparticles (NPs) is a promising technique for the selective treatment of tumor cells because of their capability to convert the absorbed radiation into heat energy. Although anisotropic gold (Au) NPs present an excellent photothermal effect, the poor structural stability during storage and/or upon laser irradiation still limits their practical application as efficient photothermal agents. With the aim of improving the stability, in this work we adopted biocompatible polypyrrole (PPy) as the shell material for coating urchinlike Au NPs. The experimental results indicate that a several nanometer PPy shell is enough to maintain the structural stability of NPs. In comparison to the bare NPs, PPy-coated NPs exhibit improved structural stability toward storage, heat, pH, and laser irradiation. In addition, the thin shell of PPy also enhances the photothermal transduction efficiency (η) of PPy-coated Au NPs, resulting from the absorption of PPy in the red and near-infrared (NIR) regions. For example, the PPy-coated Au NPs with an Au core diameter of 120 nm and a PPy shell of 6.0 nm exhibit an η of 24.0% at 808 nm, which is much higher than that of bare Au NPs (η = 11.0%). As a primary attempt at photothermal therapy, the PPy-coated Au NPs with a 6.0 nm PPy shell exhibit an 80% death rate of Hela cells under 808 nm NIR laser irradiation.

Herein, we report preparation of a bio-nanohybrid material of homogenously dispersed functionalized multiwall carbon nanotubes (fMWCNTs) in Nafion (Nf) doped with polypyrrole (PPy) and followed by one-step in situ electrochemical polymerization along with glucose oxidase (GOx) on a platinum (Pt) electrode. The bioengineered Nf-GOx-fMWCNTs-PPy/Pt electrode showed excellent electrocatalytic performance to detect glucose with a high sensitivity (54.2 μAmM-1 cm-2) in linear range of up to 4.1 mM as well as a low detection limit of 5 μM (S/N = 3), response time within 4 s, good selectivity, stability, and practical applicability. It is our hope that the comprehensive results will contribute to design an efficient glucose biosensor with practical prospects for biomedical applications.

Efficient and practical visible-light photoredox borylation of aryl halides and subsequent aerobic oxidative hydroxylation were developed. The protocols use readily available aryl halides and bis(pinacolato)diboron as the starting materials, fac-Ir(ppy)3 as the photocatalyst, and corresponding arylboronic esters and phenols were obtained in good yields. The methods show some advantages including simple equipment, mild conditions, easy operation, and wide substrate scope. Therefore, they should provide a valuable strategy for chemical transformations.