The physicochemical properties of soft electrode materials for the abio-bio interface of advanced biosensors and next generation bionic devices in the form of electroconductive hydrogels (ECH) of interpenetrating networks of polypyrrole formed within poly(hydroxyethylmethacrylate)-based hydrogels were examined. The 1.5 mol% UV-crosslinked tetraethyleneglycol diacrylate (TEGDA) (step 1) poly(HEMA) and the electropolymerized (step 2) polypyrrole co-networks were covalently joined by the inclusion of a bifunctional monomer (1.5 mol%), 2-methacryloyloxyethyl-4(3-pyrrolyl)butanate (MPB) that served to covalently link the two networks. The optical absorbance, degree of hydration, the frequency dependent electrical impedance and the elastic modulus were examined as a function of electropolymerization charge density (step 2) (1-900 mC/cm(2)) used to prepare the linked, interpenetrating co-networks. The absorption at 430 nm showed a monotonic increase with electropolymerization charge density and correlated with the increase in elastic modulus [56 (± 32)-499 (± 293) kPa], the decrease in % hydration (68-0%) and the decrease in membrane electrical resistance. Polypyrrole (PPy) grows initially from the gel-electrode interface to fill voids within the hydrogel and ultimately onto the surface of the hydrogel. Growth of attachment dependent Rhabdomyosarcoma (RMS13) and pheochromocytoma (PC 12) cells reflects this evolution, showing an increase to a maximal value and then to decrease again at high electropolymerization charge density.

Ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-QTOF/MS) and multivariate statistical analysis were used to investigate the processing technology of Loquat (Eriobotrya japonica) leaf (pipaye, PPY). The differences in samples processed using different methods were revealed by unsupervised principal component analysis (PCA). In the scores plot of PCA, honey-processed PPY (PPPY), crude PPY (CPPY), and heated PPY (HPPY) were clearly discriminated. Furthermore, samples processed at different temperatures could also be distinguished; indeed, our PCA results demonstrated the importance of temperature during processing. Two unique marker ions were found to discriminate between PPPY and CPPY by orthogonal partial least squares discriminant analysis (OPLS-DA), which could be used as potential chemical markers. The method was further confirmed by a verification test with commercial PPY. The orthogonal array experiment revealed an optimized processing condition with 50% honey at 140°C for 20 min after 4 h of moistening time, a process that provides significant information for standardized production.

A polymer complex (1P) was synthesized by binding bis(cyclometalated) Ir(ppy)2(+) fragments (ppy = 2-phenylpyridyl) to phenanthroline (phen) pendants of a poly(amidoamine) copolymer (PhenISA, in which the phen pendants involved ∼6% of the repeating units). The corresponding molecular complex [Ir(ppy)2(bap)](+) (1M, bap = 4-(butyl-4-amino)-1,10-phenanthroline) was also prepared for comparison. In water solution 1P gives nanoaggregates with a hydrodynamic diameter of 30 nm in which the lipophilic metal centers are presumed to be segregated within polymer tasks to reduce their interaction with water. Such confinement, combined with the dilution of triplet emitters along the polymer chains, led to 1P having a photoluminescence quantum yield greater than that of 1M (0.061 vs 0.034, respectively, in an aerated water solution) with a longer lifetime of the (3)MLCT excited states and a blue-shifted emission (595 nm vs 604 nm, respectively). NMR data supported segregation of the metal centers. Photoreaction of O2 with 1,5-dihydroxynaphthalene showed that 1P is able to sensitize (1)O2 generation but with half the quantum yield of 1M. Cellular uptake experiments showed that both 1M and 1P are efficient cell staining agents endowed with two-photon excitation (TPE) imaging capability. TPE microscopy at 840 nm indicated that both complexes penetrate the cellular membrane of HeLa cells, localizing in the perinuclear region. Cellular photodynamic therapy tests showed that both 1M and 1P are able to induce cell apoptosis upon exposure to Xe lamp irradiation. The fraction of apoptotic cells for 1M was higher than that for 1P (74 and 38%, respectively) 6 h after being irradiated for 5 min, but cells incubated with 1P showed much lower levels of necrosis as well as lower toxicity in the absence of irradiation. More generally, the results indicate that cell damage induced by 1M was avoided by binding the iridium sensitizers to the poly(amidoamine).

Herein, conditions for C-H functionalization of tertiary aliphatic amines and their subsequent coupling with a number of 2-chloroazole derivatives are reported. The reaction is facilitated by a catalytic amount of tris-fac-Ir(ppy)3, with blue light irradiation and takes place under mild and convenient conditions. Most couplings take place with excellent regioselectivity. The reaction is tolerant of a number of functional groups and allows for rapid access to α-azole carbinamines commonly found in post-translationally modified peptides.

A novel method for the preparation of biotin-doped porous conductive surfaces has been suggested for a variety of applications, especially for an electrically controlled release system. Well-ordered and three-dimensional porous conductive structures have been obtained by the electrochemical deposition of the aqueous biotin-pyrrole monomer mixture into particle arrays, followed by subsequent removal of the colloidal particles. Advantageously, direct incorporation of biotin molecules enhances the versatility by modifying surfaces through site-directed conjugate formation, thus facilitating further reactions. In addition, the porosity of the surfaces provides a significant impact on enhanced immobilization and efficient release of streptavidin-tagged gold nanoparticles. Biotinylated porous polypyrrole (Ppy) films were characterized by several techniques: (1) scanning electron microscopy (SEM) to evaluate surface topography, (2) X-ray photoelectron spectroscopy (XPS) to assess the potential-dependent chemical composition of the films, (3) four-point probe evaluation to measure the conductivity, cyclic voltammetry to observe surface eletroactivity, and contact angle measurement to evaluate the surface wettability, and (4) fluorescence microscopy to image and quantify the adsorption and release of gold nanoparticles. Overall, our results demonstrate that these biotinylated porous Ppy films, combined with electrical stimulation, permit a programmable release of gold nanoparticles by altering the chemical strength of the Ppy-biotin interaction.

In order to fabricate a tissue scaffold with the neurotrophic and electrical activities, conductive nerve growth factor (NGF)-conjugated polypyrrole-poly(l-lactic acid) (PPy-PLLA) composite fibers were prepared by oxidation polymerization and EDC chemistry with poly-l-lysine. PPy nanoparticles (∼70nm diameter) accumulated on PLLA fiber surface to form a rough thick shell (∼200nm thickness). These NGF-conjugated PPy-PLLA fibers could support PC12 neurite outgrowth and extension. Especially, 40% and 74% increase in PC12 neurite outgrowth and extension, respectively, could be obtained under electrical stimulation of 100mV/cm voltages through the composite fibers. A mechanism for the interaction between neurite extension and the NGF-conjugated PPy-PLLA fibers under electro-stimulation was proposed, to explain the synergistic effect of the rough PPy shell, conjugated NGF and electricity on neurite outgrowth and elongation.

Neuromuscular junctions (NMJ) are specialized synapses that link motor neurons with muscle fibers. These sites are fundamental to human muscle activity, controlling swallowing and breathing amongst many other vital functions. Study of this synapse formation is an essential area in neuroscience; the understanding of how neurons interact and control their targets during development and regeneration are fundamental questions. Existing data reveals that during initial stages of development neurons target and form synapses driven by biophysical and biochemical cues, and during later stages they require electrical activity to develop their functional interactions. The aim of this study was to investigate the effect of exogenous electrical stimulation (ES) electrodes directly in contact with cells, on the number and size of acetylcholine receptor (AChR) clusters available for NMJ formation. We used a novel in vitro model that utilizes a flexible electrical stimulation system and allows the systematic testing of several stimulation parameters simultaneously as well as the use of alternative electrode materials such as conductive polymers to deliver the stimulation. Functionality of NMJs under our co-culture conditions was demonstrated by monitoring changes in the responses of primary myoblasts to chemical stimulants that specifically target neuronal signaling. Our results suggest that biphasic electrical stimulation at 250Hz, 100μs pulse width and current density of 1mA/cm2 for 8h, applied via either gold-coated mylar or the conductive polymer PPy, significantly increased the number and size of AChRs clusters available for NMJ formation. This study supports the beneficial use of direct electrical stimulation as a strategic therapy for neuromuscular disorders.

The beneficial effects of electrical stimulation (ES) on human cells in vitro and in vivo have long been known. Although the effects of stimulation are clear and the therapeutic benefits are known, no uniform parameters exist with regard to the duration, frequency and amplitude of the ES. To this end, we are answering several important questions on the parameters for ES of nerve and muscle monocultures and co-cultures by probing the effects on the enhancement of acetylcholine receptors (AChR) clustering available for neuromuscular junction formation using a conductive platform. This work opens the possibility to combine electrical stimulus delivered via conductive polymer substrates, from which biomolecules could also be delivered, providing opportunities to further enhance the therapeutic effect.

Synthesis of the novel Cu@Au alloy nanoparticle and its application in an electrochemical DNA hybridization detection assay is described in this article. We report a low-temperature method for generating core-shell particles consisting of a core of Cu and a thin layer of Au shell that can be readily functionalized with oligonucleotides. Core-shell Cu@Au particles were successfully labeled to a 5'-alkanethiol capped oligonucleotides probe that is related to the colitoxin gene. The DNA genetic sensing assay relies on the electrostatic adsorption of target oligonucleotides onto conducting polypyrrole (PPy) surface at the glassy carbon electrode (GCE), and its hybridization to the alloy particle-oligonucleotides DNA probe. Hybridization events between probe and target were monitored by the release of the copper metal atoms anchored on the hybrids by oxidative metal dissolution and the indirectly determination of the solubilized Cu2+ ions by sensitive anodic stripping voltammetry (ASV). The detection limit is 5.0 pmol l(-1) of target oligonucleotides. The Cu@Au core-shell nanoparticles combining the surface modification properties of Au with the good electrochemical activity of Cu core shows their perspective application in the electrochemical DNA hybridization analysis assay.

BACKGROUND

The CombiMatrix ElectraSense microarray is a highly multiplex, complementary metal oxide semiconductor with 12,544 electrodes that are individually addressable. This platform is commercially available as a custom DNA microarray; and, in this configuration, it has also been used to tether antibodies (Abs) specifically on electrodes using complementary DNA sequences conjugated to the Abs.

RESULTS

An empirical method is described for developing and optimizing immunoassays on the CombiMatrix ElectraSense microarray based upon targeted deposition of polypyrrole (Ppy) and capture Ab. This process was automated using instrumentation that can selectively apply a potential or current to individual electrodes and also measure current generated at the electrodes by an enzyme-enhanced electrochemical (ECD) reaction. By designating groups of electrodes on the array for different Ppy deposition conditions, we determined that the sensitivity and specificity of a sandwich immunoassay for staphylococcal enterotoxin B (SEB) is influenced by the application of different voltages or currents and the application time. The sandwich immunoassay used a capture Ab adsorbed to the Ppy and a reporter Ab labeled for fluorescence detection or ECD, and results from these methods of detection were different.

CONCLUSIONS

Using Ppy deposition conditions for optimum results, the lower limit of detection for SEB using the ECD assay was between 0.003 and 0.01 pg/ml, which represents an order of magnitude improvement over a conventional enzyme-linked immunosorbant assay. In the absence of understanding the variables and complexities that affect assay performance, this highly multiplexed electrode array provided a rapid, high throughput, and empirical approach for developing a sensitive immunoassay.

9,10-Phenanthrenequinone (PQ) and 1,10-phenanthroline-5,6-dione (PTQ) form 1:1 and 2:1 complexes with metal ions (M (n+)=Sc (3+), Y (3+), Mg (2+), and Ca (2+)) in acetonitrile (MeCN), respectively. The binding constants of PQ--M (n+) complexes vary depending on either the Lewis acidity or ion radius of metal ions. The one-electron reduced species (PTQ(-)) forms 1:1 complexes with M (n+), and PQ(-) also forms 1:1 complexes with Sc(3+), Mg(2+), and Ca(2+), whereas PQ(-) forms 1:2 complexes with Y(3+) and La(3+), as indicated by electron spin resonance (ESR) measurements. On the other hand, semiquinone radical anions (Q(-) and NQ(-)) derived from p-benzoquinone (Q) and 1,4-naphthoquinone (NQ) form Sc(3+)-bridged pi-dimer radical anion complexes, Q(-)--(Sc(3+))(n)--Q and NQ(-)--(Sc(3+))(n)-NQ (n=2 and 3), respectively. The one-electron reduction potentials of quinones (PQ, PTQ, and Q) are largely positively shifted in the presence of M (n+). The rate constant of electron transfer from CoTPP (TPP(2-)=dianion of tetraphenylporphyrin) to PQ increases with increasing the concentration of Sc(3+) to reach a constant value, when all PQ molecules form the 1:1 complex with Sc(3+). Rates of electron transfer from 10,10'-dimethyl-9,9'-biacridine [(AcrH)(2)] to PTQ are also accelerated significantly by the presence of Sc(3+), Y(3+), and Mg(2+), exhibiting a first-order dependence with respect to concentrations of metal ions. In contrast to the case of o-quinones, unusually high kinetic orders are observed for rates of Sc(3+)-promoted electron transfer from tris(2-phenylpyridine)iridium(III) [Ir(ppy)(3)] to p-quinones (Q): second-order dependence on concentration of Q, and second- and third-order dependence on concentration of Sc(3+) due to formation of highly ordered radical anion complexes, Q()--(Sc(3+))(n)--Q (n=2 and 3).

An imprinted electrochemical sensor based on polypyrrole-sulfonated graphene (PPy-SG)/hyaluronic acid-multiwalled carbon nanotubes (HA-MWCNTs) for sensitive detection of tryptamine was presented. Molecularly imprinted polymers (MIPs) were synthesized by electropolymerization using tryptamine as the template, and para-aminobenzoic acid (pABA) as the monomer. The surface feature of the modified electrode was characterized by cyclic voltammetry (CV). The proposed sensor was tested by chronoamperometry. Several important parameters controlling the performance of the molecularly imprinted sensor were investigated and optimized. The results showed that the PPy-SG composites films showed improved conductivity and electrochemical performances. HA-MWCNTs bionanocomposites could enhance the current response evidently. The good selectivity of the sensor allowed three discriminations of tryptamine from interferents, which include tyramine, dopamine and tryptophan. Under the optimal conditions, a linear ranging from 9.0×10(-8) mol L(-1) to 7.0×10(-5) mol L(-1) for the detection of tryptamine was observed with the detection limit of 7.4×10(-8) mol L(-1) (S/N=3). This imprinted electrochemical sensor was successfully employed to detect tryptamine in real samples.

Electroconductive hydrogels (ECH) prepared as blends of UV-cross-linked poly(hydroxyethylmethacrylate) [p(HEMA)]-based hydrogels and electropolymerized polypyrrole (PPy) were synthesized as coatings on microlithographically fabricated interdigitated microsensor electrodes (IMEs) and microdisc electrode arrays (MDEAs). Hydrogels were synthesized from tetraethyleneglycol diacrylate (TEGDA), hydroxyethylmethacrylate (HEMA), polyethyleneglycol monomethacrylate (PEGMA), N-[tris(hydroxymethyl)methyl]-acrylamide (HMMA), and 3-sulfopropyl methacrylate potassium salt (SPMA) to produce p(HEMA-co-PEGMA-co-HMMA-co-SPMA) hydrogels. The conductive polymer was synthesized from pyrrole and 4-(3'-pyrrolyl)butyric acid by electropolymerization within the electrode-supported hydrogel. ECH films produced with different electropolymerization charge densities were investigated using cyclic voltammetry, electrical impedance spectroscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA). Polymer morphology was studied by SEM. The ECH demonstrated the desired characteristics of high electrical conductivity (low impedance), as well as high thermal stability compared to pure hydrogel. Signal enhancement was achieved by modifying the surface of an MDEA biotransducer with the ECH, with a 10-fold increase in the voltammetric current response associated with the ferrocene monocarboxylic acid (FcCO(2)H) redox reaction.

Luminescent dendritic cyclometalated iridium(III) polypyridine complexes [{Ir(N--C)(2)}(n)(bpy-n)](PF(6))(n) (HN--C = 2-phenylpyridine, Hppy, n = 8 (ppy-8), 4 (ppy-4), 3 (ppy-3); HN--C = 2-phenylquinoline, Hpq, n = 8 (pq-8), 4 (pq-4), 3 (pq-3)) have been designed and synthesized. The properties of these dendrimers have been compared to those of their monomeric counterparts [Ir(N--C)(2)(bpy-1)](PF(6)) (HN--C = Hppy (ppy-1), Hpq (pq-1)). Cyclic voltammetric studies revealed that the iridium(IV/III) oxidation and bpy-based reduction occurred at about +1.24 to +1.29 V and -1.21 to -1.27 V versus SCE, respectively, for all the complexes. The molar absorptivity of the dendritic iridium(III) complexes is approximately proportional to the number of [Ir(N--C)(2)(N--N)] moieties in one complex molecule. However, the emission lifetimes and quantum yields are relatively independent of the number of [Ir(N--C)(2)(N--N)] units, suggesting negligible electronic communications between these units. Upon photoexcitation, the complexes displayed triplet metal-to-ligand charge-transfer ((3)MLCT) (dpi(Ir) ->> pi*(bpy-n)) emission. The interaction of these complexes with plasmid DNA has been investigated by agarose gel retardation assays. The results showed that the dendritic iridium(III) complexes, unlike their monomeric counterparts, bound to the plasmid, and the interaction was electrostatic in nature. The lipophilicity of all the complexes has been determined by reversed-phase high-performance liquid chromatography (HPLC). Additionally, the cellular uptake of the complexes by the human cervix epithelioid carcinoma (HeLa) cell line has been examined by inductively coupled plasma mass spectrometry (ICP-MS), laser-scanning confocal microscopy, and flow cytometry. Upon internalization, all the complexes were localized in the perinuclear region, forming very sharp luminescent rings surrounding the nuclei. Interestingly, in addition to these rings, HeLa cells treated with the dendritic iridium(III) complexes showed specific labeled compartments, which have been identified to be the Golgi apparatus. Furthermore, the cytotoxicity of these iridium(III) complexes has been evaluated by the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazolium bromide (MTT) assay.

Polpyrrole (PPy)/Ag nanocomposites were successfully synthesized at the interface of water and ionic liquid by one-step UV-induced polymerization. Highly dispersed PPy/Ag nanoparticles were obtained by controlling the experimental conditions. The results of Fourier-transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy revealed that the UV-induced interface polymerization leaded to the formation of PPy incorporating silver nanoparticles. It was also found that the electrical conductivity of PPy/Ag nanocomposite was about 100 times higher than that of pure PPy.

OBJECTIVE

To study the therapeutic effect of three tube-guides with electrical conductivity associated to mesenchymal stem cells (MSCs) on neuro-muscular regeneration after neurotmesis.

METHODS

Rats with 10-mm gap nerve injury were tested using polyvinyl alcohol (PVA), PVA-carbon nanotubes (CNTs) and MSCs, and PVA-polypyrrole (PPy). The regenerated nerves and tibialis anterior muscles were processed for stereological studies after 20 wk. The functional recovery was assessed serially for gait biomechanical analysis, by extensor postural thrust, sciatic functional index and static sciatic functional index (SSI), and by withdrawal reflex latency (WRL). In vitro studies included cytocompatibility, flow cytometry, reverse transcriptase polymerase chain reaction and karyotype analysis of the MSCs. Histopathology of lung, liver, kidneys, and regional lymph nodes ensured the biomaterials biocompatibility.

RESULTS

SSI remained negative throughout and independently from treatment. Differences between treted groups in the severity of changes in WRL existed, showing a faster regeneration for PVA-CNTs-MSCs (P < 0.05). At toe-off, less acute ankle joint angles were seen for PVA-CNTs-MSCs group (P = 0.051) suggesting improved ankle muscles function during the push off phase of the gait cycle. In PVA-PPy and PVA-CNTs groups, there was a 25% and 42% increase of average fiber area and a 13% and 21% increase of the "minimal Feret's diameter" respectively. Stereological analysis disclosed a significantly (P < 0.05) increased myelin thickness (M), ratio myelin thickness/axon diameter (M/d) and ratio axon diameter/fiber diameter (d/D; g-ratio) in PVA-CNT-MSCs group (P < 0.05).

CONCLUSIONS

Results revealed that treatment with MSCs and PVA-CNTs tube-guides induced better nerve fiber regeneration. Functional and kinematics analysis revealed positive synergistic effects brought by MSCs and PVA-CNTs. The PVA-CNTs and PVA-PPy are promising scaffolds with electric conductive properties, bio- and cytocompatible that might prevent the secondary neurogenic muscular atrophy by improving the reestablishment of the neuro-muscular junction.

Photooxidation reactions of 1,5-dihydroxynaphthalene (DHN) have been carried out in the presence of cyclometalated neutral and cationic iridium (Ir) complexes 1-6 as singlet oxygen ((1)O(2)) sensitizers in order to investigate the (1)O(2) generation quantum yield and photosensitizing durability of the complexes. The reactions allowed a successful kinetic study to provide the pseudo-first-order rate constants and the initial rates of DHN consumption, which in turn led to the (1)O(2) generation quantum yields. The results revealed that cationic Ir complexes [Ir(ppy)(2)(phen)(+) (4) and Ir(ppy)(2)(bpy)(+) (5), where ppy = 2-phenylpyridine, phen = 1,10-phenanthroline, bpy = 2,2'-bipyridyl] have high (1)O(2) generation quantum yields (Φ(Δ) = 0.93, 0.97). On the other hand, neutral complexes with lower oxidation potentials were considered to have a more efficient charge-transfer (CT) interaction with molecular oxygen, which decreased the efficiency of singlet oxygen formation. Additionally, a steric factor of the ligands was reflected in (1)O(2) generation quantum yield. High yields of the oxidized product for the photoreactions using the cationic complexes indicated their excellent photosensitizing durability, originating from the high photochemical stability upon irradiation.

BACKGROUND

Evidence favoring earlier HIV ART initiation at high CD4+ T-cell counts (CD4>350/uL) has grown, and guidelines now recommend earlier HIV treatment. However, the cost of providing ART to individuals with CD4>350 in Sub-Saharan Africa has not been well estimated. This remains a major barrier to optimal global cost projections for accelerating the scale-up of ART. Our objective was to compute costs of ART delivery to high CD4+count individuals in a typical rural Ugandan health center-based HIV clinic, and use these data to construct scenarios of efficient ART scale-up.

METHODS

Within a clinical study evaluating streamlined ART delivery to 197 individuals with CD4+ cell counts >350 cells/uL (EARLI Study: NCT01479634) in Mbarara, Uganda, we performed a micro-costing analysis of administrative records, ART prices, and time-and-motion analysis of staff work patterns. We computed observed per-person-per-year (ppy) costs, and constructed models estimating costs under several increasingly efficient ART scale-up scenarios using local salaries, lowest drug prices, optimized patient loads, and inclusion of viral load (VL) testing.

RESULTS

Among 197 individuals enrolled in the EARLI Study, median pre-ART CD4+ cell count was 569/uL (IQR 451-716). Observed ART delivery cost was $628 ppy at steady state. Models using local salaries and only core laboratory tests estimated costs of $529/$445 ppy (+/-VL testing, respectively). Models with lower salaries, lowest ART prices, and optimized healthcare worker schedules reduced costs by $100-200 ppy. Costs in a maximally efficient scale-up model were $320/$236 ppy (+/- VL testing). This included $39 for personnel, $106 for ART, $130/$46 for laboratory tests, and $46 for administrative/other costs. A key limitation of this study is its derivation and extrapolation of costs from one large rural treatment program of high CD4+ count individuals.

CONCLUSIONS

In a Ugandan HIV clinic, ART delivery costs--including VL testing--for individuals with CD4>350 were similar to estimates from high-efficiency programs. In higher efficiency scale-up models, costs were substantially lower. These favorable costs may be achieved because high CD4+ count patients are often asymptomatic, facilitating more efficient streamlined ART delivery. Our work provides a framework for calculating costs of efficient ART scale-up models using accessible data from specific programs and regions.

Iridium(III) cyclometalates (1c and 2c) in which the two carborane units on the 4- or 5-positions of 2-phenylpyridine (ppy) ligands were tethered by an alkylene linker were prepared to investigate the effect of free rotation of o-carborane on phosphorescence efficiency. In comparison with the unlinked complex, tethering the o-carboranes to the 5-positions of ppy ligands (2c) enhanced phosphorescence efficiency by over 30-fold in polar medium (Φ(PL) = 0.37 vs 0.011 in THF), while restricting the rotation of o-carborane at the 4-positions (1c) negatively affected the phosphorescence efficiency. The different effects of restricted rotation of o-carborane on phosphorescence efficiency were likely a result of the different variations of the carboranyl C-C bond distances in the excited state.

We have analysed the effects of variations in orang-utan (ppy), rhesus macaque (mmu) and leaf eater (pob) monkey orthologues of the human cathelicidin LL-37, on a range of relevant biological activities. These host defence peptides range in cationicity from +4 to +10, and while the more cationic pob and mmuRL-37 are in a monomeric and unstructured form in bulk solution (F-form), the human and ppyLL-37 are in an aggregated/helical form (A-form). The in vitro antibacterial activity depended strongly on both the structural form and the charge. F-form peptides were more potent against Gram-positive and -negative bacteria and less salt, medium or serum sensitive than A-form ones. CD studies suggested that A- and F-form peptides interact with LPS in different manners, but the ability to detoxify it did not correlate directly with either the charge or structure. Toxicity towards eukaryotic cells also showed a varied dependence on the peptides' physical characteristics. Haemolytic activity was similar for all the tested peptides while other cytotoxicity assays revealed the highly cationic, F-form pobRL-37 as the most toxic, followed by the A-form human LL-37. As shown with the human peptide, toxicity depended markedly on the nature and metabolic state of the target cell. Our results suggest that different evolutionary trajectories for each orthologue lead to distinct sets of physical characteristics, which significantly differentiates their biological activities.

The present work describes the synthesis of a new conductive nanocomposite based on polypyrrole (PPy) and silver nanoparticles (PPy-AgNP) based on a facile reverse microemulsion method and its application as a non-enzymatic electrochemical sensor for glucose detection. Focusing on the best sensor performance, all experimental parameters used in the synthesis of nanocomposite were optimized based on its electrochemical response for glucose. Characterization of the optimized material by FT-IR, cyclic voltammetry, and DRX measurements and TEM images showed good monodispersion of semispherical Ag nanoparticles capped by PPy structure, with size average of 12±5nm. Under the best analytical conditions, the proposed sensor exhibited glucose response in linear dynamic range of 25 to 2500μmolL-1, with limit of detection of 3.6μmolL-1. Recovery studies with human saliva samples varying from 99 to 105% revealed the accuracy and feasibility of a non-enzymatic electrochemical sensor for glucose determination by easy construction and low-cost.

We hereby present a new method of producing coaxial conducting polymer fibres loaded with an antibiotic drug that can then be subsequently released (or sustained) in response to electrical stimulation. The method involves wet-spinning of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) fibre, which served as the inner core to the electropolymerised outer shell layer of polypyrrole (Ppy). Ciprofloxacin hydrochloride (Cipro) was selected as the model drug and as the dopant in the Ppy synthesis. The release of Cipro in phosphate buffered saline (PBS) from the fibres was controlled by switching the redox state of Ppy.Cipro layer. Released Cipro under passive and stimulated conditions were tested against Gram positive (Streptococcus pyogenes) and Gram negative (Escherichia coli) bacteria. Significant inhibition of bacterial growth was observed against both strains tested. These results confirm that Cipro retains antibacterial properties during fibre fabrication and electrochemically controlled release. In vitro cytotoxicity testing utilising the neural B35 cell line confirmed the cytocompatibility of the drug loaded conducting fibres. Electrical conductivity, cytocompatibility and tuning release profile from this flexible fibre can lead to promising bionic applications such as neuroprosthetics and localised drug delivery.

In this manuscript, the regioselective halogenation, nitration, formylation, and acylation of Ir(tpy)(3) and Ir(ppy)(3) (tpy = 2-(4'-tolyl)pyridine and ppy = 2-phenylpyridine) and the subsequent conversions are described. During attempted bromination of the three methyl groups in fac-Ir(tpy)(3) using N-bromosuccinimide (NBS) and benzoyl peroxide (BPO), three protons at the 5'-position (p-position with respect to the C-Ir bond) of phenyl rings in tpy units were substituted by Br, as confirmed by (1)H NMR spectra, mass spectra, and X-ray crystal structure analysis. It is suggested that such substitution reactions of Ir complexes proceed via an ionic mechanism rather than a radical mechanism. UV-vis and luminescence spectra of the substituted Ir(III) complexes are reported. The introduction of electron-withdrawing groups such as CN and CHO groups at the 5'-position of tpy induces a blue shift of luminescence emission to about 480 nm, and the introduction of electron-donating groups such as an amino group results in a red shift to about 600 nm. A reversible change of emission for the 5'-amino derivative of Ir(tpy)(3), Ir(atpy)(3), between red and green occurs upon protonation and deprotonation.

Cationic cyclometalated iridium complexes containing two anionic phenylpyridine (ppy) ligands and the neutral bidentate triazole-pyridine ligand, 2-(1-substituted-1H-1,2,3-triazol-4-yl)pyridine (pytl), were investigated. The complexes display a rich and reversible electrochemical behavior, upon investigations by cyclic voltammetry in strictly aprotic conditions, that couples with excellent emission quantum yields and long lifetimes of the excited states. Therefore, in organic media, all complexes have generated intense green electrochemiluminescence (ECL) through the so-called annihilation procedure and, importantly, a modulation of the emission energy (to blue) has been easily obtained by simple fluorination of the ppy ligand. Finally, taking advantage of their remarkable solubility in water, intense ECL was also obtained from aqueous buffer solutions using the co-reactant method, thus making all the investigated complexes highly promising for their effective use as ECL labels in bioanalytical applications.

In recent years, conducting polymers combined with metallic nanoparticles have been paid more attention due to their potential applications in microelectronics, microsystems, optical sensors and photoelectronic chemistry. The work presented in this paper describes the preparation and characterization of a nanocomposite composed by a thin polypyrrole (PPy) film covered with an assembly of magnetic nanoparticles (NPs). The magnetic particles were immobilized on PPy films under appropriate magnetic field in order to control their organization on the PPy film and finally to improve the sensitivity of the system in potential sensing applications. The electrical properties and morphology of the resulting PPy film and the PPy film/NPs composite were characterized with cyclic voltammetry, impedance spectroscopy (IS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and infra-red spectroscopy (IR). By using streptavidin labeled magnetic particles it was possible to functionalize the NPs assembly with biotin-Fab fragment K47 antibody. The designed biosensor had been successfully applied in rapid, simple, and accurate measurements of atrazine concentrations, with a significantly low detection limit of 5 ng/ml.