Perchlorate (ClO(4)(-)) contamination is a widespread concern affecting water utilities. In the present study, functionalized graphene sheets were employed as the scaffold to synthesize a novel graphene-polypyrrole (Ppy) nanocomposite, which served as an excellent electrically switched ion exchanger for perchlorate removal. Scanning electron microscopy and electrochemical measurements showed that the 3D nanostructured graphene-Ppy nanocomposite exhibited a significantly improved uptake capacity for ClO(4)(-) compared with Ppy film alone. X-ray photoelectron spectroscopy confirmed the uptake and release process of ClO(4)(-) in graphene-Ppy nanocomposite. In addition, the presence of graphene substrate resulted in high stability of graphene-Ppy nanocomposite during potential cycling. The present work provides a promising method for large scale water treatment.

A new series of iridium(III) mixed ligand complexes TBA[Ir(ppy)(2)(CN)(2)] (1), TBA[Ir(ppy)(2)(NCS)(2)] (2), TBA[Ir(ppy)(2)(NCO)(2)] (3), and [Ir(ppy)(2)(acac)] (4) (ppy = 2-phenylpyridine; acac = acetoylacetonate, TBA = tetrabutylammonium cation) have been developed and fully characterized by UV-vis, emission, IR, NMR, and cyclic voltammetric studies. The lowest energy MLCT transitions are tuned from 463 to 494 nm by tuning the energy of the HOMO levels. These complexes show emission maxima in the blue, green, and yellow region of the visible spectrum and exhibit unprecedented phosphorescence quantum yields, 97 +/- 3% with an excited-state lifetimes of 1-3 micros in dichloromethane solution at 298 K. The near-unity quantum yields of these complexes are related to an increased energy gap between the triplet emitting state and the deactivating e(g) level that have been achieved by meticulous selection of ligands having strong ligand field strength. Organic light-emitting devices were fabricated using the complex 4 doped into a purified 4,4'-bis(carbazol-9-yl)biphenyl host exhibiting a maximum of the external quantum efficiencies of 13.2% and a power efficiency of 37 lm/W for the 9 mol % doped system.

In this study, two novel electrode materials were tested to enhance bacterial adhesion and increase power production in microbial fuel cells (MFCs). Polypyrrole (PPy), a nontoxic conductive polymer, was coated on the plain carbon cloth electrodes to bridge with the biopolymers on bacterial cell membranes and to improve the power production. The PPy-coated electrodes increased the initial power from 20 mW/m(2) to 160 mW/m(2) in the first 4-day period. But there was no clear difference between two PPy coating thicknesses (5-cycle coating and 50-cycle coating) in terms of the bacterial adhesion and power production. Granular activated carbon (GAC), a commonly used bacterial support material with high surface area, exhibited a good bacterial adhesion and high power output. GAC-SCMFCs (single chamber MFCs) generated 5 W/m(3) and maintained the peak power for 6 days. Compared with plain carbon cloth electrodes, GAC-SCMFCs had lower internal resistances and higher power generations. However, GAC-SCMFCs had lower columbic efficiency and energy conversion efficiency than the conventional two chamber MFCs.

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.

This work reports a comprehensive study about cell adhesion and proliferation on the surface of different electroactive substrates formed by pi-conjugated polymers. Biological assays were performed considering four different cellular lines: two epithelial and two fibroblasts. On the other hand, the electroactivity of the three conducting systems was determined in physiological conditions. Results indicate that the three substrates behave as a cellular matrix, even though compatibility with cells is larger for PPy and the 3-layered system. Furthermore, the three polymeric systems are electro-compatible with the cellular monolayers.

We have investigated the evolutionary history of the 4q35 paralogous region, and of a sub-family of interspersed LSau repeats. In HSA, 4q35 duplications were localized at 1q12, 3p12.3, 4q35, 10q26, 20cen, whereas duplicons and interspersed LSau repeats simultaneously labeled the p arm of acrocentric chromosomes. A multi-site localization of 4q35-like sequences was also observed in PTR, GGO, PPY, HLA (Hominoidea) and PAN (Old World monkey), thus indicating that duplications of this region have occurred extensively in the two clades, which diverged at least 25 million years ago. In HSA, PTR and PAN, 4q35-derived duplicons co-localized with rDNA, whereas in GGO and PPY this association was partially lacking. In PAN, the single- and multi-site distribution of rDNA and paralogous sequences, respectively, indicates a different timing of sequence dispersal. The sub-family of interspersed LSau repeats showed a lesser dispersal than 4q35 duplications both in man and great apes. This finding suggests that duplications and repeated sequences have undergone different expansion/contraction events during evolution. The mechanisms underlying the dispersal of paralogous regions may be further derived through studies comparing the detailed structural organization of these genomic regions in man and primates.

We report that ionic liquids (ILs) can be observed by electron microscopy without any charging of the liquid. Based on this, we present an in situ electrochemical scanning electron microscopy (in situ ECSEM) system. The key technology that enables in situ ECSEM is that charges can be removed from an IL by grounding it with a Pt wire, even if the IL is in an insulating glass cell. As a first demonstration, we describe the redox reaction of a polypyrrole (PPy) film accompanied by changes in its thickness when it is polarized by the film-deposited Pt electrode in the IL. Furthermore, energy-dispersive X-ray fluorescence (EDX) analysis can be employed for the electrode polarized in the IL. The component analysis by EDX of PPy in an IL containing K+ as a marker, reveals doping of electrolyte cations into the PPy film upon the latter's reduction and dedoping of cations from the film upon oxidation.

BACKGROUND

Rituximab has been used in antineutrophil cytoplasmic antibody (ANCA)-associated vasculitis (AAV) since 2003. Our objective was to describe outcomes and adverse events following rituximab since that time in an inception cohort.

METHODS

Patients with AAV (diagnosed 1991-2012) who received rituximab (n = 120) were evaluated and incidence per person-year (PPY) with 95% confidence interval was calculated for relapse and infections. Time to remission and relapse by number of rituximab infusions given per treatment course (≤2 versus >2) and by ever having been exposed to cyclophosphamide were compared using Kaplan-Meier curves. Rituximab-treated patients were characterized in comparison with AAV patients treated with cyclophosphamide but not exposed to rituximab (n = 351) using Fisher's exact or rank tests.

RESULTS

Rituximab resulted in 86% achieving remission and 41% having a subsequent relapse in a median of 19 months (range 9-29). Time to remission and relapse were similar between rituximab infusion courses (≤2 versus >2; remission P = 0.86 and relapse P = 0.78, respectively). Incidence of relapse was 0.22 PPY (0.14, 0.31) and of severe infection was 0.12 PPY (0.08, 0.24). Time to relapse was shorter in those never exposed to cyclophosphamide (n = 20): 50% by 8 months versus 50% by 24 and 30 months for those with prior or concurrent exposure to cyclophosphamide (n = 100). Compared with those who never received rituximab, rituximab-treated patients were younger (P < 0.001), more likely to have granulomatosis with polyangiitis (P = 0.001) and had more upper airway (P = 0.01) and less kidney involvement (P = 0.007).

CONCLUSIONS

Rituximab is beneficial when prescribed outside of a trial setting. Response to treatment and relapse is similar regardless of infusion number. Rituximab without cyclophosphamide may result in a shorter time to relapse supporting combination of these therapies.

Porous nitrogen-doped carbon nanotubes (PNCNTs) with a high specific surface area (1765 m(2) g(-1)) and a large pore volume (1.28 cm(3) g(-1)) have been synthesized from a tubular polypyrrole (T-PPY). The inner diameter and wall thickness of the PNCNTs are about 55 nm and 22 nm, respectively. This material shows extremely promising properties for both supercapacitors and for encapsulating sulfur as a superior cathode material for high-performance lithium-sulfur (Li-S) batteries. At a current density of 0.5 A g(-1), PNCNT presents a high specific capacitance of 210 F g(-1), as well as excellent cycling stability at a current density of 2 A g(-1). When the S/PNCNT composite was tested as the cathode material for Li-S batteries, the initial discharge capacity was 1341 mA h g(-1) at a current rate of 1 C and, even after 50 cycles at the same rate, the high reversible capacity was retained at 933 mA h g(-1). The promising electrochemical energy-storage performance of the PNCNTs can be attributed to their excellent conductivity, large surface area, nitrogen doping, and unique pore-size distribution.

Through the use of [Ru(bpy)3Cl2] (bpy=2,2'-bipyridine) and [Ir(ppy)3] (ppy=phenylpyridine) as photocatalysts, we have achieved the first example of visible-light photocatalytic radical alkenylation of various α-carbonyl alkyl bromides and benzyl bromides to furnish α-vinyl carbonyls and allylbenzene derivatives, prominent structural elements of many bioactive molecules. Specifically, this transformation is regiospecific and can tolerate primary, secondary, and even tertiary alkyl halides that bear β-hydrides, which can be challenging with traditional palladium-catalyzed approaches. The key initiation step of this transformation is visible-light-induced single-electron reduction of C-Br bonds to generate alkyl radical species promoted by photocatalysts. The following carbon-carbon bond-forming step involves a radical addition step rather than a metal-mediated process, thereby avoiding the undesired β-hydride elimination side reaction. Moreover, we propose that the Ru and Ir photocatalysts play a dual role in the catalytic system: they absorb energy from the visible light to facilitate the reaction process and act as a medium of electron transfer to activate the alkyl halides more effectively. Overall, this photoredox catalysis method opens new synthetic opportunities for the efficient alkenylation of alkyl halides that contain β-hydrides under mild conditions.

A novel functionalized gold nanoparticle-polypyrrole-nanobiocomposite (PPy-FGNP-NBC) with large effective surface area was fabricated for electrical/pH dual stimuli-responsive local delivery of insulin. The fabrication method involves simple electrodeposition and immobilization processes without use of organic solvents. Release studies based on the nature of insulin-surface binding indicated that release was promoted for PPy-FGNP-NBC. Kinetics analysis showed that release of insulin strongly affected by applying external potential stimuli. Also, the insulin release was under influence of pH and was slowed down under lower pH. This pH-sensitivity was remarkably increased by applying potential. Based on in vitro release study under applied potential condition, insulin release in the artificial gastric juice is significantly slower than that in the artificial intestinal fluid. Circular dichroism analysis showed that insulin retained its original conformation during electrochemically stimulated release.

Background: Bladder cancer (BCa) has the highest incidence of aggressive malignant tumors in the urogenital system and is the ninth most common cancer worldwide. Immune function-related genes (IFRGs), which are plentiful in immune cells and the immune microenvironment (IME), have the potential to assess prognosis and predict the efficacy of immunotherapy. A complete and significant immunogenomic analysis based on abundant BCa genetic samples from The Cancer Genome Atlas (TCGA) will provide insight into the field.

Results: A total of 57 differentially expressed IFRGs were significantly associated with the clinical outcomes of patients with BCa. Functional enrichment analysis showed that these genes actively participated in the KEGG pathway of human cytomegalovirus infection. Based on the IFRGs (CALR, MMP9, PAEP, RBP7, STAT1, CACYBP, ANHAK, RAC3, SLIT2, EDNRA, IGF1, NAMPT, NTF3, PPY, ADRB2 and SH3BP2), the risk scores were calculated to predict survival and reveal the relationships with age, sex, grade, staging, T-stage, N-stage, and M-stage. Interestingly, IFRG-based risk scores (IRRSs) reflected the infiltration of several types of immune cells. The expression of CACYBP was more significant in grade 3, T3 and T4 stages than in earlier grades and T-stages.

Conclusion: Our results highlighted some sIFRGs with remarkable clinical relevance, showed the driving factors of the immune repertoire, and illustrated the significance of IFRG-based individual immune features in the identification, monitoring, and prognosis of patients with BCa.

Methods: Based on the TCGA dataset, we integrated the expression profiles of IFRGs and overall survival (OS) in 430 patients with BCa. Differentially expressed IFRGs and survival-related IFRGs (sIFRGs) were highlighted by calculating the difference algorithm and COX regression analysis in patients with BCa. Based on computational biology, the potential molecular mechanisms and characteristics of these IFRGs were also explored. Using multivariate Cox analysis, new risk scores based on immune-related genes were developed. The expression of CACYBP was verified by qPCR, western blot and immunohistochemistry. The relations between CACYBP and clinical features were proven by immunohistochemistry.

Keywords: CACYBP; bladder cancer; immunogen; prognosis; risk score.

A facile co-electrodeposition method has been developed to fabricate reduced graphene oxide/polypyrrole (rGO/PPy) composite films, with sodium dodecyl benzene sulfonate as both a surfactant and supporting electrolyte in the precursor solution. The introduction of rGO into the PPy films forms porous structure and enhances the conductivity across the film, leading to superior electrochemical performance. By controlling the deposition time and rGO concentration, the highest area capacitance can reach 411 mF/cm2 (0.2 mA/cm2) for rGO/PPy films, whereas optimized specific capacitance is as high as 361 F/g (0.2 mA/cm2). All of the composite films exhibit excellent rate capability (at least 175 F/g at the current density of 12 mA/cm2) compared with pure PPy film (only 12 F/g at the current density of 12 mA/cm2). The rGO/PPy composite exhibits excellent cycling stability that maintains 104% of its initial capacitance after cycling for 2000 cycles and 80% for 5000 cycles. The two-electrode solid-state supercapacitor (SC) based on rGO/PPy composite electrodes demonstrates good rate performance, excellent cycling stability, as well as a high area capacitance of 222 mF/cm2. The solid-state planar SC based on the rGO/PPy composite exhibits an area capacitance of 9.4 mF/cm2, demonstrating great potential for fabrication of microsupercapacitors.

The monodispersed spindle-like polypyrrole hollow nanocapsules (PPy HNCs) as the multifunctional platforms for combining chemotherapy with photothermal therapy for cancer cells are reported. Whereas the hollow cavity of nanocapsules can be used to load the anticancer drug (i.e., doxorubicin) for chemotherapy, the PPy shells can convert NIR light into heat for photothermal therapy. The release of the drug from the spindle-like PPy HNCs is pH-sensitive and near-infrared (NIR) light-enhanced. More importantly, the spindle-like PPy HNCs can penetrate cells more rapidly and efficiently in comparison with the spherical PPy HNCs. Both in vitro and in vivo experiments demonstrated that the combination of DOX-loaded spindle-like PPy HNCs and NIR light provide a highly effective and feasible chemo-photothermal therapy cancer method with a synergistic effect. Owing to their high photothermal conversion efficiency, large hollow cavity, and good biocompatibility, the spindle-like PPy HNCs could be used as a promising new cancer drug-nanocarrier and photothermal agent for localized tumorous chemo-photothermal therapy.

Luminescent cyclometalated rhodium(III) and iridium(III) complexes of the general formula [M(ppy) 2(N (wedge)N)][PF 6], with N (wedge)N = Hcmbpy = 4-carboxy-4'-methyl-2,2'-bipyridine and M = Rh ( 1), Ir ( 2) and N (wedge)N = H 2dcbpy = 4,4'-dicarboxy-2,2'-bipyridine and M = Rh ( 3), Ir ( 4), were prepared in high yields and fully characterized. The X-ray molecular structure of the monocarboxylic iridium complex [Ir(ppy) 2(Hcmbpy)][PF 6] ( 2) was also determined. The photophysical properties of these compounds were studied and showed that the photoluminescence of rhodium complexes 1 and 3 and iridium complexes 2 and 4 originates from intraligand charge-transfer (ILCT) and metal-to-ligand charge-transfer/ligand-centered MLCT/LC excited states, respectively. For comparison purposes, the mono- and dicarboxylic acid ruthenium complexes [Ru(DIP) 2(Hcmbpy)][Cl] 2 ( 5) and [Ru(DIP) 2(H 2dcbpy)][Cl] 2 ( 6), where DIP = 4,7-diphenyl-1,10-phenanthroline, were also prepared, whose emission is MLCT in nature. Comparison of the photophysical behavior of these rhodium(III), iridium(III), and ruthenium(II) complexes reveals the influence of the carboxylic groups that affect in different ways the ILCT, MLCT, and LC states.

Control of stem cell behaviors at solid biointerfaces is critical for stem-cell-based regeneration and generally achieved by engineering chemical composition, topography, and stiffness. However, the influence of dynamic stimuli at the nanoscale from solid biointerfaces on stem cell fate remains unclear. Herein, we show that electrochemical switching of a polypyrrole (Ppy) array between nanotubes and nanotips can alter surface adhesion, which can strongly influence mechanotransduction activation and guide differentiation of mesenchymal stem cells (MSCs). The Ppy array, prepared via template-free electrochemical polymerization, can be reversibly switched between highly adhesive hydrophobic nanotubes and poorly adhesive hydrophilic nanotips through an electrochemical oxidation/reduction process, resulting in dynamic attachment and detachment to MSCs at the nanoscale. Multicyclic attachment/detachment of the Ppy array to MSCs can activate intracellular mechanotransduction and osteogenic differentiation independent of surface stiffness and chemical induction. This smart surface, permitting transduction of nanoscaled dynamic physical inputs into biological outputs, provides an alternative to classical cell culture substrates for regulating stem cell fate commitment. This study represents a general strategy to explore nanoscaled interactions between stem cells and stimuli-responsive surfaces.

A novel O-butyryl chitosan (OBCS)-grafted polypyrrole (PPy) film was described. The immobilization was accomplished by photocrosslinking the OBCS onto PPy films under ultraviolet light irradiation. The surfaces of OBCS-grafted PPy film were characterized by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and electron spectroscopy for chemical analysis (ESCA). The blood compatibility of the OBCS-grafted PPy film was evaluated by platelet-rich plasma (PRP) contacting experiments and protein adsorption experiments in vitro. These results have demonstrated that the surface with immobilized OBCS shows much less platelet adhesive and fibrinogen adsorption compared to the control surface. The bulk conductivity values of PPy films were measured by a modified four-probe method. The composite films have both good blood compatibility and high electrical conductivity that make them suitable for using as potential biomaterials, such as electrically conducting blood vessel and functionally haemocompatible substrate of biosensor used directly in whole blood.

Two-dimensional (2D) nanostructure patterns have extensive applications in photonic devices, nanoelectronics, electrochemical devices, biosensors, catalysts and high-density magnetic recording devices. It remains a challenge to develop low-cost, high-throughput, high-resolution techniques for the fabrication of large-area (wafer-scale) 2D nanostructure array patterns with controlled feature size, shape and pitch. The present work has demonstrated a low-cost, high-throughput, high-resolution approach for the fabrication of large-area, high-quality nanostructure array patterns by nanosphere lithography combined with electroplating. The gold hemisphere array pattern obtained is capable of functioning as a nanoelectrode array (NEA) in which the gold hemispheres act as individual electrodes that are separated with an insulating polypyrrole (PPY) film. Cyclic voltammetry measurement has shown a sigmoid-shaped voltammogram, which is characteristic of electrochemical characteristics of a nanoelectrode array. NEAs are expected to find extensive applications in fundamental electrochemistry studies and electrochemical devices.

It is reported for the first time that direct electron-transfer processes between a polypyrrole (PPY) entrapped quinohemoprotein alcohol dehydrogenase from Gluconobacter sp. 33 (QH-ADH) and a platinum electrode take place via the conducting-polymer network. The cooperative action of the enzyme-integrated prosthetic groups--pyrroloquinoline-quinone and hemes--is assumed to allow this electron-transfer pathway from the enzyme's active site to the conducting-polymer backbone. A hypothetical model of the electron transfer is proposed which is supported by the influence of various parameters, such as, e.g., ionic strength and nature of the buffer salts. This unusual electron-transfer pathway leads to an accentuated increase of the K M app value (102 mM) and hence to a significantly increased linear detection range of an ethanol sensor based on this enzyme.

Many processes in living cells have electrochemical characteristics that are suitable for measurement by potentiometric biosensors. Potentiometric biosensors allow non-invasive, real time monitoring of the extracellular environment changes by measuring the potential at cell/sensor interface. This can be used as an indicator for overall cell cytotoxicity. The present work employs a potentiometric sensor array to investigate the cytotoxicity of hydroquinone to cultured mammalian V79 cells. Various electrode substrates (Au, PPy-HQ and PPy-PS) used for cell growth were designed and characterized. The controllable release of hydroquinone from PPy substrates was studied. Our results showed that hydroquinone exposure affected cell proliferation and delayed cell growth and attachment in a dose-dependent manner. Additionally, we have shown that exposure of V79 cells to hydroquinone at low doses (i.e. 5 microM) for more than 15 h allows V79 cells to gain enhanced adaptability to survive exposure to high toxic HQ doses afterwards. Compared with traditional methods, the potentiometric biosensor not only provides non-invasive and real time monitoring of the cellular reactions but also is more sensitive for in vitro cytotoxicity study. By real time and non-invasive monitoring of the extracellular potential in vitro, the potentiometric sensor system represents a promising biosensor system for drug discovery.

An emitter electrode with an electroactive poly(pyrrole) (PPy) polymer film coating was constructed for use in electrospray ionization mass spectrometry (ESI-MS). The PPy film acted as a surface-attached redox buffer limiting the interfacial potential of the emitter electrode. While extensive oxidation of selected analytes (reserpine and amodiaquine) was observed in positive ion mode ESI using a bare metal (gold) emitter electrode, the oxidation was suppressed for these same analytes when using the PPy-coated electrode. A semi-quantitative relationship between the rate of oxidation observed and the interfacial potential of the emitter electrode was shown. The redox buffer capacity, and therefore the lifetime of the redox buffering effect, correlated with the oxidation potential of the analyte and with the magnitude of the film charge capacity. Online reduction of the PPy polymer layer using negative ion mode ESI between analyte injections was shown to successfully restore the redox buffering capacity of the polymer film to its initial state.

Iridium(III) complexes with intense phosphorescence in solution have been widely applied in organic light-emitting diodes, chemosensors and bioimaging. However, little attention has been paid to iridium(III) complexes showing weak phosphorescence in solution and enhanced phosphorescence emission in the solid state (EPESS). In the present study, two β-diketonate ligands with different degrees of conjugation, 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HL1) and 1-phenyl-3-methyl-4-phenylacetyl-5-pyrazolone (HL2), have been synthesized to be used as ancillary ligands for two iridium(III) complexes, Ir(ppy)(2)(L1) and Ir(ppy)(2)(L2) (Hppy = 2-phenylpyridine). The two complexes have been characterized by single-crystal X-ray crystallography, (1)H NMR and elemental analysis. Interestingly, Ir(ppy)(2)(L1) is EPESS-active whereas Ir(ppy)(2)(L2) exhibits moderately intense emission both in solution and as a neat film, indicating that the degree of conjugation of the β-diketone ligands determines the EPESS-activity. The single-crystal X-ray analysis has indicated that there are π-π interactions between the adjacent ppy ligands in Ir(ppy)(2)(L1) but not in Ir(ppy)(2)(L2). Finally, EPESS-active Ir(ppy)(2)(L1) has been successfully embedded in polymer nanoparticles and used as a luminescent label in bioimaging.

Four iridium(III)-containing coordination polymers 1-4 using Ir(ppy)(2)(H(2)dcbpy)PF(6) (L-H(2), ppy = 2-phenylpyridine, H(2)dcbpy = 4,4'-dicarboxy-2,2'-bipyridine) as the bridging ligand, [ZnL(2)]·3DMF·5H(2)O (1), [CdL(2)(H(2)O)(2)]·3DMF·6H(2)O (2), [CoL(2)(H(2)O)(2)]·2DMF·8H(2)O (3) and [NiL(2)(H(2)O)(2)]·3DMF·6H(2)O (4), have been synthesized and structurally characterized. The emissions from 1-4 are ascribed to a metal-to-ligand charge transfer transition (MLCT). The absolute emission quantum yields for 1-4 in single crystals were measured in air to be 0.274, 0.193, 0.001 and 0.002, respectively. The noteworthy oxygen-sensing properties of 1-4 as well as L-H(2) in a single crystal were also evaluated. The Stern-Volmer quenching constant, K(SV) values, of 1-4 and L-H(2) can be deduced to be 0.834, 2.820, 1.328, 1.111 and 2.476, respectively. The results show promising K(SV) values (e.g.2) that are competitive or even larger than those of many known Ir-complexes. Moreover, the short response time (e.g. compound 2) and recovery times toward oxygen of 1-4 have been measured in their single crystal forms. The reversibility experiments for 1-4 were carried out for seven repeated cycles. As a result, >75% recovery of intensity for 1 and 2 on each cycle demonstrates a high degree of reproducibility during the sensing process. It should be noted that iridium(III)-containing coordination polymers with high emission intensity and notable oxygen sensing properties are obscure, especially in the single crystal form. This, in combination with its fine reversibility, leads to success in single crystal oxygen recognition based on photoluminescence imaging. The detection limit could be 0.50% for gaseous oxygen. Moreover, the temperature effect of compound 2 in a single crystal upon application as an oxygen sensor was expected.

Starvation inhibits and refeeding stimulates transcription of the malic enzyme gene in chick liver. DNA between -320 and +72 base pairs (bp) is DNase I-hypersensitive in hepatic nuclei from fed but not starved chicks (Ma, X. J., and Goodridge, A. G. (1992) Nucleic Acids Res. 20, 4997-5002). A polypyrimidine/polypurine (PPY/PPU) tract lies within the DNase I-hypersensitive region. In hepatocytes transiently transfected with plasmids containing triiodothyronine response elements and a minimal promoter from the malic enzyme gene linked to the chloramphenicol acetyltransferase gene, deletion of the PPY/PPU tract inhibited chloramphenicol acetyltransferase activity by about 90% with or without triiodothyronine. Fine mapping of S1 nuclease-sensitive sites suggests that the PPY/PPU tract can assume different isoforms of non-B-DNA, some of which may be triplex structures. The PPY/PPU tract contains specific binding sites for single- and double-stranded DNA binding proteins and, with 8 bp 3' of the tract, can function as a promoter. A (CT)7 repeat binds single-stranded DNA-binding protein and is essential for promoter activity. Two C-rich elements bind single-stranded DNA-binding proteins and may mediate inhibition of promoter function. The single- and double-stranded DNA-binding proteins that interact with the PPY/PPU tract may regulate transcription of the malic enzyme gene.