Drug release from compressed tablets manufactured with a powder mixture of poly(ethylene oxide) (PEO), a drug, and magnesium stearate is presented. Several factors such as molecular weight, drug loading, drug solubility, the pH of the dissolution medium, and stirring rate are investigated. The drug release from the high molecular weight PEO tablets (MW = 2 x 10(6) and 4 x 10(6)) is governed by the swelling of the polymer rather than by the erosion of the polymer, leading to anomalous release kinetics. However, the drug release from the low molecular weight PEO (MW = 0.9 x 10(6)) is controlled primarily by the swelling/erosion of the polymer, resulting in front synchronization and a constant release rate. It is observed that drug loading and drug solubility do not influence the release of drugs from low molecular weight PEO tablets. The pH of the dissolution medium and the stirring rate do not affect the drug release regardless of the molecular weight of the PEO.

This review summarizes recent literature and some of our own results on aggregation behavior on water-soluble block copolymers belonging to three different classes viz. hydrophilic-hydrophobic (AB, ABA and BAB) block copolymers, double hydrophilic block copolymers (DHBCs) and ABC triblock copolymers. In the case of amphiphilic copolymers, special attention has been focussed on aggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers (Pluronics) and their aggregation in aqueous solutions at different temperatures as well as in the presence of various additives. Recent studies based on modern techniques viz. scattering (static and dynamic light scattering and small angle neutron scattering), spectral methods, e.g., fluorescence (static and time resolved), nuclear magnetic resonance and Fourier transform infrared spectroscopies, thermal methods e.g., differential scanning calorimetry and isothermal titration calorimetry, cryotransmission electron microscopy, ultrasonic absorption along with general physical properties like surface tension, viscosity and dye solubilization are summarized. For the DHBCs where one of the blocks is usually a polyion, complex formation by adding oppositely charged ions induces the formation of nanoaggregates. Characterization of such nanoaggregates of polyion complexes of DHBCs and their potential use for incorporation of ionic solutes in the micellar core are reviewed. The formation and characteristics of core-shell-corona micelles of ABC triblock copolymers and their applications as vehicles for controlled drug release are also discussed.

A hydrolyzable crosslinker (N,O-dimethacryloylhydroxylamine (MANHOMA)) was synthesized by a modified method and was characterized using 1H-NMR, FTIR, and melting point determination. Naltrexone-loaded nanoparticles were prepared by copolymerization of poly(ethylene glycol)1000 monomethyl ether mono methacrylate (PEO-MA), methyl methacrylate (MMA) and N,O-dimethacryloylhydroxylamine (MANHOMA) in 0.4% poly(vinyl alcohol) aqueous solution. The nanoparticles were characterized by FTIR, particle size determination and transmission electron microscope (TEM). The TEM photomicrographs of the nanoparticles show a crosslinked core surrounded by a ring formed by the polyethylene glycol tail of PEO-MA. The loading efficiency of the nanoparticles and in vitro drug availability from the nanoparticles were investigated. The naltrexone-loaded hydrolyzable crosslinked nanoparticles were able to sustain the release of naltrexone for different periods of time, depending on the monomer feed composition.

Polymer-ceramic composite electrolytes are emerging as a promising solution to deliver high ionic conductivity, optimal mechanical properties, and good safety for developing high-performance all-solid-state rechargeable batteries. Composite electrolytes have been prepared with cubic-phase Li7 La3 Zr2 O12 (LLZO) garnet and polyethylene oxide (PEO) and employed in symmetric lithium battery cells. By combining selective isotope labeling and high-resolution solid-state Li NMR, we are able to track Li ion pathways within LLZO-PEO composite electrolytes by monitoring the replacement of (7) Li in the composite electrolyte by (6) Li from the (6) Li metal electrodes during battery cycling. We have provided the first experimental evidence to show that Li ions favor the pathway through the LLZO ceramic phase instead of the PEO-LLZO interface or PEO. This approach can be widely applied to study ion pathways in ionic conductors and to provide useful insights for developing composite materials for energy storage and harvesting.

BACKGROUND

Phenethylisothiocyanate (PEITC) is produced by Brassica food plants. PEO is a PEITC Essential Oil containing >95% natural PEITC. PEITC is known to produce various health benefits but its effect in alleviation of ulcerative colitis signs is unknown.

RESULTS

In two efficacy studies (acute and chronic) oral administration of PEO was effective at remitting acute and chronic signs of ulcerative colitis (UC) in mice. Disease activity, histology and biochemical characteristics were measured in the treated animals and were compared with appropriate controls. PEO treatment significantly improved body weights and stool consistency as well as decreased intestinal bleeding. PEO treatment also reduced mucosal inflammation, depletion of goblet cells and infiltration of inflammatory cells. Attenuation of proinflammatory interleukin1beta production was observed in the colons of PEO-treated animals. Expression analyses were also carried out for immune function related genes, transcription factors and cytokines in lipopolysaccharide-activated mouse macrophage cells. PEO likely affects an intricate network of immune signaling genes including a novel concentration dependent reduction of total cellular Signal Transducer and Activator of Transcription 1 (STAT1) as well as nuclear phosphorylated-STAT1 (activated form of STAT1). A PEO-concentration dependent decrease of mRNA of C-X-C motif ligand 10 (a STAT1 responsive chemokine) and Interleukin 6 were also observed.

CONCLUSIONS

PEO might be a promising candidate to develop as a treatment for ulcerative colitis patients. The disease attenuation by PEO is likely associated with suppression of activation of STAT1 transcription and inhibition of pro-inflammatory cytokines.

Poloxamer 407 is a non-ionic polyethylene oxide (PEO)/polypropylene oxide (PPO) block copolymer, which exhibits reversible thermogelation properties. Poloxamer gel has attracted many applications for controlled release of therapeutic agents as well as in surgical interventions such as controlled vascular occlusion. We show that poloxamer gel can trigger the complement system, which is an integral part of innate immunity and its inadvertent activation can induce clinically significant anaphylaxis. Complement activation by the poloxamer gel is through the alternative pathway, but material transformations from gel to the solution state further incite complement through calcium-sensitive pathways, where a role for C1q and antibodies has been eliminated. Poloxamer addition to plasma/serum (at levels above its critical micelle concentration, cmc) induced formation of large and diffused structures, which may have been responsible for triggering complement. Since poloxamer 407 administration has been reported to cause significant changes in plasma cholesterol and triglyceride levels we further examined the role of lipoproteins in poloxamer-mediated complement activation. Our results show a protective role for elevated serum HDL, LDL and their predominant apolipoproteins (apoAI and apoB-100, respectively) on poloxamer-mediated complement activation. Electron microscopy investigations indicated formation of two distinct populations of new structures on mixing of poloxamer (at concentrations above its cmc) with human LDL, which could have played a significant role in regulating complement activation. These observations are in line with the suggested modulatory role of lipoproteins in host defence and inflammatory processes. A better understanding of block copolymer interaction with lipoproteins/apolipoproteins could improve the immune safety of surgical and therapeutic interventions requiring PEO/PPO block copolymers and may provide new insights for combinatorial design of multifunctional copolymers.

The adherence of three clinical isolates of Staphylococcus epidermidis to model polystyrene surfaces was studied in vitro using epifluorescent image analysis. A series of 16 Pluronic surfactants (A-B-A block copolymers where A is poly(ethylene oxide) (PEO) and B is poly(propylene oxide) (PPO)) were used as surface modifiers for the model polystyrene surfaces. Substantial reductions (up to 97%) in bacterial adhesion levels were achieved with all copolymers tested, irrespective of the PPO or PEO block lengths. It appears likely that such treatments create a sterically stabilized surface with adsorbed PEO chains, conferring nonspecific anti-adhesive properties which can limit bacterial attachment.

OBJECTIVE

To assess the potential of polymeric nanoparticles (NPs) to affect the genital distribution and local and systemic pharmacokinetics (PK) of the anti-HIV microbicide drug candidate dapivirine after vaginal delivery.

METHODS

Dapivirine-loaded, poly(ethylene oxide)-coated poly(epsilon-caprolactone) (PEO-PCL) NPs were prepared by a nanoprecipitation method. Genital distribution of NPs and their ability to modify the PK of dapivirine up to 24 h was assessed after vaginal instillation in a female mouse model. Also, the safety of NPs upon daily administration for 14 days was assessed by histological analysis and chemokine/cytokine content in vaginal lavages.

RESULTS

PEO-PCL NPs (180-200 nm) were rapidly eliminated after administration but able to distribute throughout the vagina and lower uterus, and capable of tackling mucus and penetrate the epithelial lining. Nanocarriers modified the PK of dapivirine, with higher drug levels being recovered from vaginal lavages and vaginal/lower uterine tissues as compared to a drug suspension. Systemic drug exposure was reduced when NPs were used. Also, NPs were shown safe upon administration for 14 days.

CONCLUSIONS

Dapivirine-loaded PEO-PCL NPs were able to provide likely favorable genital drug levels, thus attesting the potential value of using this vaginal drug delivery nanosystem in the context of HIV prophylaxis.

In this study, temperature-responsive magnetite/polymer nanoparticles were developed from iron oxide nanoparticles and poly(ethyleneimine)-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer. The particles were characterized by TEM, XRD, DLS, VSM, FTIR, and TGA. A typical product has an approximately 20 nm magnetite core and an approximately 40 nm hydrodynamic diameter with a narrow size distribution and is superparamagnetic with large saturation magnetization (51.34 emu/g) at room temperature. The most attractive feature of the nanoparticles is their temperature-responsive volume-transition property. DLS results indicated that their average hydrodynamic diameter underwent a sharp decrease from 45 to 25 nm while evaluating the temperature from 20 to 35 degrees C. The temperature-dependent evolution of the C-O stretching band in the FTIR spectra of the aqueous nanoparticles solution revealed that thermo-induced self-assembly of the immobilized block copolymers occurred on the magnetite solid surfaces, which is accompanied by a conformational change from a fully extended state to a highly coiled state of the copolymer. Consequently, the copolymer shell could act as a temperature-controlled "gate" for the transit of guest substance. The uptake and release of both hydrophobic and hydrophilic model drugs were well controlled by switching the transient opening and closing of the polymer shell at different temperatures. A sustained release of about 3 days was achieved in simulated human body conditions. In primary mouse experiments, drug-entrapped magnetic nanoparticles showed good biocompatibility and effective therapy for spinal cord damage. Such intelligent magnetic nanoparticles are attractive candidates for widespread biomedical applications, particularly in controlled drug-targeting delivery.

Physical property studies of surfaces formed by chemisorption of polyethylene oxide (PEO) onto gold are reported. Such surfaces have potential as model materials for elucidation of the mechanism of resistance to protein adsorption by PEO surfaces. Thiolated monomethoxy poly(ethylene oxide) (PEO) was chemisorbed onto gold-coated silicon wafers under various conditions such that different surface chain densities were achieved. Chain density was varied by controlling PEO solubility (proximity to cloud-point conditions) as well as chemisorption time. Films prepared with PEO of molecular weight 750, 2000, and 5000 g/mol were studied. Chain densities determined in the dry state by ellipsometry were found to be in the range of 0.4-0.7, 0.33-0.58, and 0.12-0.30 chains/nm(2) for MW 750, 2000, and 5000 PEO, respectively. Chain density was found to decrease with increasing molecular weight and to increase as cloud-point conditions were approached. PEO-layer mass densities and chain densities were determined independently by neutron reflectometry. Under low-solubility conditions and for a 4-h chemisorption time, film mass and chain density values of 1.0 +/-0.3 g cm(-3) and 1.8 +/- 0.9 chains/nm(2) were found for MW 750 PEO, and 0.82 +/- 0.02 g cm(-3) and 0.23 +/- 0.07 chains/nm(2) for MW 5000 PEO. Ellipsometry data for these systems yielded graft densities of 0.63 +/- 0.13 and 0.30 +/- 0.02 chains/nm(2), respectively. Using the mass densities obtained from the neutron data in the ellipsometry calculations, chain densities of 0.6 +/- 0.3 and 0.25 +/- 0.02 chains/nm(2), respectively, were obtained for the MW 750 and 5000 films. The ellipsometry and neutron data for the MW 5000 system are thus in agreement within experimental error. In general, the chain-density values are much higher than those corresponding to layers of unperturbed random coil PEO ("mushrooms"), suggesting that the PEO layers are in the brush regime with the chains in an extended conformation.

Polymer vesicles with diameters of ca. 100-600 nm and bearing benzaldehyde functionalities within the vesicular walls were constructed through self-assembly of an amphiphilic block copolymer PEO(45)-b-PVBA(26) in water. The reactivity of the benzaldehyde functionalities was verified by cross-linking the polymersomes and also by a one-pot cross-linking and functionalization approach to further render the vesicles fluorescent, each via reductive amination. In vitro studies found these labeled nanostructures to undergo cell association.

Scaffolds from poly(ethylene oxide) and poly(butylene terephthalate), PEOT/PBT, with a PEO molecular weight of 1,000 and a PEOT content of 70 weight% (1000PEOT70PBT30) were prepared by leaching salt particles (425-500 microm). Scaffolds of 73.5, 80.6 and 85.0% porosity were treated with a CO(2) gas plasma and seeded with rat bone marrow stromal cells (BMSCs). After in vitro culture for 7 days (d) in an osteogenic medium the scaffolds were subcutaneously implanted for 4 weeks in nude mice. Poly(D, L-lactide) (PDLLA) and biphasic calcium phosphate (BCP) scaffolds were included as references. After 4 weeks (wks) all scaffolds showed ectopic formation of bone and bone marrow. For the scaffolds of different porosities, no significant differences were observed in the relative amounts of bone (7-9%) and bone marrow (6-11%) formed, even though micro computed tomography (mu-CT) data showed considerable differences in accessible pore volume and surface area. 1000PEOT70PBT30 scaffolds with a porosity of 85% could not maintain their original shape in vivo. Surprisingly, 1000PEOT70PBT30 scaffolds with a porosity of 73.5% showed cartilage formation. This cartilage formation is most likely due to poorly accessible pores in the scaffolds, as was observed in histological sections. mu-CT data showed a considerably smaller accessible pore volume (as a fraction of the total volume) than in 1000PEOT70PBT30 scaffolds of 80.6 and 85.0% porosity. BMSC seeded PDLLA (83.5% porosity) and BCP scaffolds (29% porosity) always showed considerably more bone and bone marrow formation (bone marrow formation is approximately 40%) and less fibrous tissue ingrowth than the 1000PEOT70PBT30 scaffolds. The scaffold material itself can be of great influence. In more hydrophobic and rigid scaffolds like the PDLLA or BCP scaffolds, the accessibility of the pore structure is more likely to be preserved under the prevailing physiological conditions than in the case of hydrophilic 1000PEOT70PBT30 scaffolds. Scaffolds prepared from other PEOT/PBT polymer compositions, might prove to be more suited.

The advent of solid-state polymer electrolytes for application in lithium batteries took place more than four decades ago when the ability of polyethylene oxide (PEO) to dissolve suitable lithium salts was demonstrated. Since then, many modifications of this basic system have been proposed and tested, involving the addition of conventional, carbonate-based electrolytes, low molecular weight polymers, ceramic fillers, and others. This Review focuses on ternary polymer electrolytes, that is, ion-conducting systems consisting of a polymer incorporating two salts, one bearing the lithium cation and the other introducing additional anions capable of plasticizing the polymer chains. Assessing the state of the research field of solid-state, ternary polymer electrolytes, while giving background on the whole field of polymer electrolytes, this Review is expected to stimulate new thoughts and ideas on the challenges and opportunities of lithium-metal batteries.

Transient rheological properties and mucoadhesion of hydrogels composed of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO, or Pluronic) block copolymers and poly(acrylic acid) were explored. Nine Pluronic copolymers ranging in nominal molecular weight and PPO/PEO content were grafted to PAA through C-C bonds, with or without the use of divinyl cross-linker, ethylene glycol dimethacrylate (EGDMA). The hydrogel elasticity increased with the PPO content in the copolymers, as well as in the presence of EGDMA. Tensile tests were conducted to measure the fracture strength and the work of adhesion between the hydrogels and rat intestinal tissue. The fracture strength was proportional to the gel pseudoequilibrium modulus and depended on the nominal length of the PPO segments in the parent Pluronic copolymer. The work of mucoadhesion and gel cohesion declined with the loss angle measured in oscillatory shear experiments. The length of the PEO segments in Pluronic affected the work of adhesion. Applications of the Pluronic-PAA gels as vehicles in oral drug delivery are discussed. The longest Pluronic copolymers bonded to PAA resulted in copolymeric gels with strongest mucoadhesive properties.

Targeted uptake of nanoscale controlled release polymer micelles encapsulated with drugs represents a potential powerful therapeutic technology. Herein we reported the development of anti-HIF-1alpha antibody-conjugated unimolecular polymer nano micelles filled with Paclitaxel for cancer targeting therapy. Pluronic triblock copolymers(Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), PEO-block-PPO-block-PEO) P123 were functionalized with terminal carboxylic groups, and were characterized by infrared (IR) spectroscopy, nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), and differential scanning calorimetric (DSC). The amphiphilic copolymer nano micelles encapsulated with Paclitaxel were fabricated by self-assembly means, and then were conjugated with anti-HIF-1alpha antibody, the resultant anti-HIF-1alpha conjugated nano micelles filled with PTX (anti-HIF-1alpha-NMs-PTX nanocomposites) were characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM), and incubated with stomach cancer MGC-803 cells and HDF fibroblast cells, these treated cells were analyzed by MTT and cell-ELISA. The nanocomposites composed of anti-HIF-1alpha conjugated nano micelles filled with CdTe quantum dots were also prepared, and incubated with stomach cancer MGC-803 cells and HDF fibroblast cells for 24 h, then were observed by fluorescent microscope. Results showed that the anti-HIF-1alpha-NMs-PTX nanocomposites were successfully prepared, bound with stomach cancer MGC-803 cells specifically, were internalized, and released PTX inside cancer cells, and selectively killed cancer cells. In conclusion, unique anti-HIF-1alpha antibody-conjugated nano micelles filled with Paclitaxel can target and selectively kill cancer cells with over-expression of HIF-1alpha, and has great potential in clinical tumor targeting imaging and therapy.

We report herein biotin-streptavidin-mediated aggregation studies of long gold nanorods. We have previously demonstrated end-to-end linkages of gold nanorods driven by the biotin-streptavidin interaction (Caswell et al. J. Am. Chem. Soc. 2003, 125, 13914). In that report, the specific binding of biotin disulfide to the gold nanorod edges was achieved due to the preferred binding of thiol molecules to the Au[111] surface (gold nanorod ends) as opposed to the gold nanorod side faces. This led to the end-end linkage of gold nanorods upon subsequent addition of streptavidin. In this report we demonstrate a simple procedure to biotinylate the entire gold nanorod surface and subsequently form a 3-D assembly by addition of streptavidin. Gold nanorods were synthesized by the three-step seeding protocol documented in our previous articles. The surface of gold nanorods was further modified by a layer of a weak polyelectrolyte, poly(acrylic acid), PAA. A biotin molecule which has an amine group at one end (biotin-PEO-amine) was anchored to the carboxylic acid group of the polyelectrolyte using the well-known carbodiimide chemistry. This process biotinylates the entire gold nanorod surface. Addition of streptavidin further leads to aggregation of gold nanorods. A closer look at the aggregates reveals a preferential side-to-side assembly of gold nanorods. The gold nanorods were characterized at each stage by UV-vis spectroscopy, light scattering, and transmission electron microscopy (TEM) measurements.

Considerable interest has arisen in precision fabrication of cell bearing scaffolds and structures by free form fabrication. Gelatin is an ideal material for creating cell entrapping constructs, yet its application in free form fabrication remains challenging. We demonstrate the use of gelatin, crosslinked with microbial transglutaminase (mTgase), as a material to print cell bearing hydrogels for both 2-dimensional (2-D) precision patterns and 3-dimensional (3-D) constructs. The precision patterning was attained with 3 % gelatin and 2 % high molecular weight poly (ethylene oxide) (PEO) whereas 3-D constructs were obtained using a 5 % gelatin solution. These hydrogels, referred to as "bioinks" supported entrapped cell growth, allowing cell spreading and proliferation for both HEK293 cells and Human Umbilical Vein Endothelial Cells (HUVECs). These bioinks were shown to be dispensable by robotic precision, forming patterns and constructs that were insoluble and of suitable stiffness to endure post gelation handling. The two bioinks were further characterized for fabrication parameters and mechanical properties.

A facile approach to synthesize and incorporate metal nanoparticles (NPs) into electrospun polymer nanofibers (NFs) wherein the electrospinning polymer acts as both a reducing agent for the metal salt precursor, as well as a protecting and templating agent for the ensuing NPs, is reported. Such a true one-step process at ambient conditions and free of organic solvents is demonstrated using a system comprising AgNO(3) and poly(ethylene oxide) (PEO) at electrospinnable molecular weights of 600, 1000, or 2000 kDa. The PEO transforms Ag(+) into AgNPs, a phenomenon that has not been previously possible at PEO molecular weights less than 20 kDa without the addition of a separate reducing agent and stabilizer or the application of heat. Results from X-ray photoelectron spectroscopy and UV-Vis absorption spectrophotometry analyses support the formation of pseudo-crown ethers in high molecular weight PEO as the mechanism in the development of NPs. The AgNPs reduce fiber diameter and enhance fiber quality (reduced beading) due to increased electrical conductivity. Interestingly, several of the NFs exhibit AgNP-localized nanochain formation and protrusion from the NF surface that can be attributed to the combined effect of applied electrical field on the polymer and the differences between the electrical conductivity and polarizability of the polymer and metal NPs.

A novel glucose-responsive hydrogel system based on dynamic covalent chemistry and inclusion complexation was described. Hydrogels are formed by simply mixing the solutions of three components: poly(ethylene oxide)-b-poly vinyl alcohol (PEO-b-PVA) diblock polymer, α-cyclodextrin (α-CD) and phenylboronic acid (PBA)-terminated PEO crosslinker. Dynamic covalent bonds between PVA and PBA provide sugar-responsive crosslinking, and the inclusion complexation between PEO and α-CD can promote hydrogel formation and enhance hydrogel stability. The ratios of the three components have a remarkable effect on the gelation time and the mechanical properties of the final gels. In rheological measurements, the hydrogels are demonstrated to possess solid-like behaviour and good structural recovery ability after yielding. The sugar-responsiveness of the hydrogels was examined by protein loading and release experiments, and the results indicate that this property is also dependent on the compositions of the gels; at a proper component ratio, a new glucose-responsive hydrogel system operating at physiological pH can be obtained. The combination of good biocompatibility of the three components and the easy preparation of hydrogels with tunable glucose-responsiveness may enable an alternative design of hydrogel systems that finds potential applications in biomedical and pharmaceutical fields, such as treatment of diabetes.

Prevention strategies such as the development of microbicides are thought to be valuable in the fight against HIV/AIDS. Despite recent achievements, there is still a long road ahead in the field, particularly at the level of drug formulation. Drug nanocarriers based on polymers may be useful in enhancing local drug delivery while limiting systemic exposure. We prepared differently surface-engineered poly(ε-caprolactone) (PCL) nanoparticles (NPs) and tested their ability to modulate the permeability and retention of dapivirine in cell monolayers and pig vaginal and rectal mucosa. NPs coated with poly(ethylene oxide) (PEO) were shown able to reduce permeability across monolayers/tissues, while modification of nanosystems with cetyl trimethylammonium bromide (CTAB) enhanced transport. In the case of coating NPs with sodium lauryl sulfate (SLS), dapivirine permeability was unchanged. All NPs increased monolayer/tissue drug retention as compared to unformulated dapivirine. This fact was associated, at least partially, to the ability of NPs to be taken up by cells or penetrate mucosal tissue. Cell and tissue toxicity was also affected differently by NPs: PEO modification decreased the in vitro (but not ex vivo) toxicity of dapivirine, while higher toxicity was generally observed for NPs coated with SLS or CTAB. Overall, presented results support that PCL nanoparticles are capable of modulating drug permeability and retention in cell monolayers and mucosal tissues relevant for vaginal and rectal delivery of microbicides. In particular, PEO-modified dapivirine-loaded PCL NPs may be advantageous in increasing drug residence at epithelial cell lines/mucosal tissues, which may potentially increase the efficacy of microbicide drugs.

We present the formation of collagen-binding mixed micelles and their potential suitability to deliver therapeutic drugs to the vessel wall. We modified poly(ethylene oxide)-bl-poly(propylene oxide)-bl-poly(ethylene oxide) (Pluronic F-127) to display sulfate groups on the terminus of the PEO block to act as a heparin mimics and bind to collagen in the extracellular matrix. This functionalized macroamphiphile was incorporated into a mixed micelle with poly(propylene sulfide)-bl-poly(ethylene oxide), a macroamphiphile that demonstrates improved micellar stability relative to Pluronic F-127 micelles. The mixed micelles were examined using analytical ultracentrifugation, dynamic light scattering, transmission electron microscopy, and measures of the critical micellar concentration using surface tensiometry. Encapsulation and in vitro release of Sirolimus, an immunosuppressant drug of interest in coronary artery treatment, was considered as an example. Mixed micelles with the sulfate functionality demonstrated enhanced binding to collagen I coated surfaces, suggestive of the potential for binding to the extracellular milieu.

Spirulina is a microalga which offers biological functions highly favorable for tissue engineering. Highly porous scaffolds can be produced by electrospinning containing biomass of Spirulina. The goal of this contribution was therefore to establish spinning conditions allowing to produce well defined nanofibers with diameters down to about 100 nm and to produce nanofibers with various concentration of the biomass for subsequent studies in tissue engineering applications. The experimental results reveal that the blend system PEO/biomass is behaved surprisingly well in electrospinning. Very thin bead-free nanofibers with diameters of about 110 nm can be produced for different biomass contents of up to 67 wt.% of the nanofibers and for PEO concentrations in the spinning solution well below 4 wt.%. These results suggest to us the use of the biomass containing nanofibers as extracellular matrices for stem cell culture and future treatment of spinal chord injury.

Smart polymeric micelles (PMs) are of practical interest as nanocarriers for the encapsulation and controlled release of hydrophobic drugs. Two hydrophobic drugs, naturally-based curcumin (Cur) and synthetic 5-fluorouracil (5-FU), were loaded into the PMs formed by a well-defined pH-sensitive poly(2-vinyl pyridine)-b-poly(ethylene oxide) (P2VP₉₀-b-PEO₃₉₈) block copolymer. The influence of the drug loading on the micellar sizes was investigated by dynamic light scattering (DLS) and it appears that the size of the PMs increases from around 60 to 100 nm when Cur is loaded. On the contrary, the loading of the 5-FU has a smaller effect on the micellar sizes. This difference can be attributed to higher molar mass of Cur with respect to 5-FU but also to higher loading efficiency of Cur, 6.4%, compared to that of 5-FU, 5.8%. In vitro drug release was studied at pH 2, 6.8, and 7.4, and it was observed that the pH controls the release of both drugs. At pH 2, where the P2VP sequences from the "frozen-in" micellar core are protonated, the drug release efficiencies exceed 90%. Moreover, it was demonstrated, by in vitro assays, that these PMs are hemocompatible and biocompatible. Furthermore, the PMs protect the Cur against the photo-degradation, whereas the non-ionic PEO corona limits the adsorption of bovine serum albumin (BSA) protein on the surface. This study demonstrates that these pH-sensitive PMs are suitable for practical utilization as human-safe and smart, injectable drug delivery systems.

Keywords: 5-fluorouracil; biocompatible; curcumin; hemocompatible; pH-sensitive micelles; poly(2-vinyl pyridine)-b-poly(ethylene oxide).

Electrospinning hydrophilic nanofiber mats that deliver hydrophobic agents would enable the development of new therapeutic wound dressings. However, the correlation between precursor solution properties and nanofiber morphology for polymer solutions electrospun with or without hydrophobic oils has not yet been demonstrated. Here, cinnamaldehyde (CIN) and hydrocinnamic alcohol (H-CIN) were electrospun in chitosan (CS)/poly(ethylene oxide) (PEO) nanofiber mats as a function of CS molecular weight and degree of acetylation (DA). Viscosity stress sweeps determined how the oils affected solution viscosity and chain entanglement (Ce) concentration. Experimentally, the maximum polymer:oil mass ratio electrospun was 1:3 and 1:6 for CS/PEO:CIN and:H-CIN, respectively; a higher chitosan DA increased the incorporation of H-CIN only. The correlations determined for electrospinning plant-derived oils could potentially be applied to other hydrophobic molecules, thus broadening the delivery of therapeutics from electrospun nanofiber mats.