The pH effect of pyrrole electropolymerization in the presence of glucose oxidase (GODx) on the performance and characteristic of galvanostatically fabricated glucose oxidase/polypyrrole (Ppy) biosensor is reported. Preparing the GODx/Ppy biosensors in 0.1 M KCl saline solution with various pH containing 0.05 M pyrrole monomer and 0.5 mg/ml GODx at 382 microA/cm2 current density for 100 mC/cm2 film thickness, both the galvanostatic responses and characteristics of these resulted biosensors were obtained. The results revealed that the galvanostatic glucose biosensor fabricated at neutral pH condition exhibited much higher sensitivity than those fabricated at lower or higher pH conditions, and had a good linearity form zero to 10 mM glucose with the sensitivity of 7 nA/mM. Finally, the long-term stability and the kinetic parameters, Michaelis constant and maximum current, of this biosensor were also reported.

Phosphorescent iridium(III) complexes have been attracting increasing attention in applications as luminescent chemosensors. However, no instance of an iridium(III) complex being used as a molecular logic gate has hitherto been reported. In the present study, two iridium(III) complexes, [Ir(ppy)(2)(PBT)] and [Ir(ppy)(2)(PBO)], have been synthesized (PBT, 2-(2-Hydroxyphenyl)-benzothiazole; PBO, 2-(2-hydroxyphenyl)-benzoxazole), and their chemical structures have been characterized by single-crystal X-ray analysis. Theoretical calculations and detailed studies of the photophysical and electrochemical properties of these two complexes have shown that the N^O ligands dominate their luminescence emission properties. Moreover, [Ir(ppy)(2)(PBT)], containing a sulfur atom in the N^O ligand, can serve as a highly selective chemodosimeter for Hg(2+) with ratiometric and naked-eye detection, which is associated with the dissociation of the N^O ligand PBT from the complex. Furthermore, complex [Ir(ppy)(2)(PBT)] has been further developed as an AND and INHIBIT logic gate with Hg(2+) and histidine as inputs.

Triblock copolymer of poly(ethylene glycol)-b-poly(2-dimethylaminoethyl methacrylate)-b-poly(pyrenylmethyl methacrylate) (PEG-b-PDMAEMA-b-PPy) has been developed for use as an ideal gene delivery system, which showed both high stability under physiological conditions and efficient gene release in a mimetic cancer environment. The siRNA release from this system without external stimulation was 16% in 1 h and then remained steady. However, the photo-triggered siRNA release was 78% within 1 h and was higher than 91% after 24 h. The remarkable contrast between the stability and release efficiency of these siRNA-condensed micelleplexes before and after photo-irradiation has been rationalized by the light- and pH-induced structural transitions of the triblock copolymer micelles. The negligible cytotoxicity, high cellular uptake efficiency, and remarkable knockdown efficiency shown in in vitro tests further revealed the promising potential of these triblock copolymer micelleplexes for use in stimuli-responsive gene therapy.

Precise quantitative measurement of viscosity at the subcellular level presents great challenges. Two-photon phosphorescence lifetime imaging microscopy (TPPLIM) can reflect micro-environmental changes of a chromophore in a quantitative manner. Phosphorescent iridium complexes are potential TPPLIM probes due to their rich photophysical properties including environment-sensitive long-lifetime emission and high two-photon absorption (TPA) properties. In this work, a series of iridium(iii) complexes containing rotatable groups are developed as mitochondria-targeting anticancer agents and quantitative viscosity probes. Among them, Ir6 ([Ir(ppy-CHO)₂(dppe)]PF₆; ppy-CHO: 4-(2-pyridyl)benzaldehyde; dppe: cis-1,2-bis(diphenylphosphino)ethene) shows satisfactory TPA properties and long lifetimes (up to 1 μs). The emission intensities and lifetimes of Ir6 are viscosity-dependent, which is mainly attributed to the configurational changes in the diphosphine ligand as proved by ¹H NMR spectra. Ir6 displays potent cytotoxicity, and mechanism investigations show that it can accumulate in mitochondria and induce apoptotic cell death. Moreover, Ir6 can induce mitochondrial dysfunction and monitor the changes in mitochondrial viscosity simultaneously in a real-time and quantitative manner via TPPLIM. Upon Ir6 treatment, a time-dependent increase in viscosity and heterogeneity is observed along with the loss of membrane potential in mitochondria. In summary, our work shows that multifunctional phosphorescent metal complexes can induce and precisely detect microenvironmental changes simultaneously at the subcellular level using TPPLIM, which may deepen the understanding of the cell death mechanisms induced by these metallocompounds.

In this study, we fabricate ammonia sensors based on hybrid thin films of reduced graphene oxide (RGO) and conducting polymers using the Langmuir-Schaefer (LS) technique. The RGO is first prepared using hydrazine (Hy) and/or pyrrole (Py) as the reducing agents, and the resulting pyrrole-reduced RGO (Py-RGO) is then hybridized with polyaniline (PANI) and/or polypyrrole (PPy) by in-situ polymerization. The four different thin films of Hy-RGO, Py-RGO, Py-RGO/PANI, and Py-RGO/PPy are deposited on interdigitated microelectrodes by the LS techniques, and their structures are characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results of ammonia sensing experiments indicate that the Py-RGO/PANI film exhibits the highest sensor response of these four films, and that it exhibits high reproducibility, high linearity of concentration dependency, and a very low detection limit (0.2 ppm) both in N₂ and exhaled air environments. The current gas sensor, therefore, has potential for diagnostic purposes because it has the additional advantages of facile fabrication, ease of use at room temperature, and portability compared to conventional high-sensitivity ammonia sensors.

Urchin-like polypyrrole (U_PPy) nanoparticles with various diameters were fabricated using a dual-nozzle electrospray and vapor deposition polymerization (VDP). Metal oxide nanoneedle-decorated PPy (FePPy) particles were fabricated as starting materials for deposition of a PPy layer on the metal oxide surface. The FePPy particles were prepared by heating and stirring an aqueous solution of the metal precursor and electrosprayed PPy (E_PPy) particles with nucleated sites on the surface. U_PPys with a maximized surface area were then formed by soaking in an initiator solution followed by VPD. The U_PPy particles were evaluated in various hazardous chemical gas sensors at room temperature. Because of their larger surface area, U_PPy based chemiresistive sensors exhibited greater sensitivity and ca. 10-100 times higher minimum detectable levels (MDLs) of common analytes than pristine PPy particle-based sensors. For example, the MDL of NH₃ was approximately 0.01 ppm, which is better than that observed for other conducting polymer nanostructures. Our new fabrication methodology promises to be an effective approach for fabrication of hybrid nanostructures for future sensing technologies.

The synthesis of the two penta-pyridyl type ligands pyridine-2,6-diylbis(dipyridin-2-ylmethanol) (PPy, 1) and bis-2,2''-bipyridine-6-yl(pyridine-2-yl)methanol (aPPy, 2) is described. Both ligands coordinate rapidly to the 3d element cations Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Zn(II), thereby yielding complexes of the general composition [MBr(1)](+) and [MBr(2)](+), respectively. Further, the X-ray structures of selected complexes with ligands 1 and 2 are described. They show metal center dependent structural features and complexes with 2 exhibiting distinctly distorted octahedral geometries. Moreover, photocatalytic water reduction with [Co(II)Br(PPy)]Br (1c) and [Co(II)Br(aPPy)]Br (2c) as water reducing catalysts (WRC) was investigated. Both complexes showed catalytic activity in water when in presence of ascorbic acid as sacrificial electron donor and [Re(py)(bpy)(CO)3](+) (3) as photosensitizer (PS). Turnover numbers, TONs (H2/Co), up to 11,000 were achieved. Complex 2c was more active than 1c, whereas none of the other complexes showed any activity.

Composites of nanocellulose and the conductive polymer polypyrrole (PPy) are presented as candidates for a new generation of haemodialysis membranes. The composites may combine active ion exchange with passive ultrafiltration, and the large surface area (about 80 m(2) g(-1)) could potentially provide compact dialysers. Herein, the haemocompatibility of the novel membranes and the feasibility of effectively removing small uraemic toxins by potential-controlled ion exchange were studied. The thrombogenic properties of the composites were improved by applying a stable heparin coating. In terms of platelet adhesion and thrombin generation, the composites were comparable with haemocompatible polymer polysulphone, and regarding complement activation, the composites were more biocompatible than commercially available membranes. It was possible to extract phosphate and oxalate ions from solutions with physiological pH and the same tonicity as that of the blood. The exchange capacity of the materials was found to be 600 ± 26 and 706 ± 31 μmol g(-1) in a 0.1 M solution (pH 7.4) and in an isotonic solution of phosphate, respectively. The corresponding values with oxalate were 523 ± 5 in a 0.1 M solution (pH 7.4) and 610 ± 1 μmol g(-1) in an isotonic solution. The heparinized PPy-cellulose composite is consequently a promising haemodialysis material, with respect to both potential-controlled extraction of small uraemic toxins and haemocompatibility.

Clinical and experimental studies have established eosinophilia as a sign of allergic disorders. Activation of eosinophils in the airways is believed to cause epithelial tissue injury, contraction of airway smooth muscle and increased bronchial responsiveness. As part of the search for new antiasthmatic agents produced by medicinal plants, the effects of 270 standardized medicinal plant extracts on cytokine-activated A549 human lung epithelial cells were evaluated. After several rounds of activity-guided screening, the new natural compound, 1H,8H-Pyrano[3,4-c]pyran-1,8-dione (PPY), was isolated from Vitex rotundifolia L. To elucidate the mechanism by which the anti-asthmatic responses of PPY occurred in vitro, lung epithelial cells (A549 cell) were stimulated with TNF-alpha, IL-4 and IL-1beta to induce the expression of chemokines and adhesion molecules involved in eosinophil chemotaxis. PPY treatments reduced the expression of eotaxin, IL-8, IL-16 and VCAM-1 mRNA significantly. Additionally, PPY reduced eotaxin secretion in a dose-dependent manner and significantly inhibited eosinophil migration toward A549 medium. In addition, PPY treatment suppressed the phosphorylation of p65 and ERK1/2, suggesting that it can inhibit the MAPK/NF-KB pathway. To clarify the anti-inflammatory and antiasthmatic effects of PPY in vivo, we examined the influence of PPY on the development of pulmonary eosinophilic inflammation in a murine model of asthma. To accomplish this, mice were sensitized and challenged with ovalbumin (OVA) and then examined for the following typical asthmatic reactions: an increase in the number of eosinophils in BALF; the presence of Th2 cytokines such as IL-4 and IL-5 in the BALF; the presence of allergen-specific IgE in the serum; and a marked influx of inflammatory cells into the lung. Taken together, our results revealed that PPY exerts profound inhibitory effects on the accumulation of eosinophils into the airways while reducing the levels of IL-4, IL-5, and IL-13 in the BALF. Therefore, these results suggest that PPY may be useful as a new therapeutic drug for the treatment of allergic asthma.

In this paper, a hierarchical NiCo2S4@polypyrrole core-shell heterostructure nanotube array on Ni foam (NiCo2S4@PPy/NF) was successfully developed as a bind-free electrode for supercapacitors. NiCo2S4@PPy-50/NF obtained under 50 s PPy electrodeposition shows a low charge-transfer resistance (0.31 Ω) and a high area specific capacitance of 9.781 F/cm(2) at a current density of 5 mA/cm(2), which is two times higher than that of pristine NiCo2S4/NF (4.255 F/cm(2)). Furthermore, an asymmetric supercapacitor was assembled using NiCo2S4@PPy-50/NF as positive electrode and activated carbon (AC) as negative electrode. The resulting NiCo2S4@PPy-50/NF//AC device exhibits a high energy density of 34.62 Wh/kg at a power density of 120.19 W/kg with good cycling performance (80.64% of the initial capacitance retention at 50 mA/cm(2) over 2500 cycles). The superior electrochemical performance can be attributed to the combined contribution of both component and unique core-shell heterostructure. The results demonstrate that the NiCo2S4@PPy-50 core-shell heterostructure nanotube array is promising as electrode material for supercapacitors in energy storage.

Seaweeds have beneficial nutritional and medicinal properties. Several studies have examined the polysaccharides found in the extracts of Porphyra yezoensis (PPY), although the effects of particular proteins have not been reported, and peptides from the marine alga PPY function in antitumor cell signaling, although the precise mechanism is not well understood. Apoptosis plays an important role in cell death, which affects cell proliferation. Generally, regulation of apoptosis requires participation of the p53 and Bcl-2 family by the mammalian target of rapamycin (mTOR) pathway, which is activated in a variety of malignant cancers. Autophagy is another signaling pathway that leads to degradation of cellular components by lysosomal activity, and the relationship between autophagy and cancer has been of interest for several years. The present study investigated mTOR pathway activation in MCF-7 cells treated with 500 ng PPY for 24 h by assessing LC3 as a monitor of autophagy. We observed that the p53/NF-κB and mTOR pathways were affected by PPY, which contributes to our understanding of the functional relationship between the Bcl-2 family and mTOR under apoptotic conditions in MCF-7 cells.

The development of high-surface-area carbon electrodes with a defined pore size distribution and the incorporation of pseudo-active materials to optimize the overall capacitance and conductivity without destroying the stability are at present important research areas. Composite electrodes of carbon nano-onions (CNOs) and polypyrrole (Ppy) were fabricated to improve the specific capacitance of a supercapacitor. The carbon nanostructures were uniformly coated with Ppy by chemical polymerization or by electrochemical potentiostatic deposition to form homogenous composites or bilayers. The materials were characterized by transmission- and scanning electron microscopy, differential thermogravimetric analyses, FTIR spectroscopy, piezoelectric microgravimetry, and cyclic voltammetry. The composites show higher mechanical and electrochemical stabilities, with high specific capacitances of up to about 800 F g(-1) for the CNOs/SDS/Ppy composites (chemical synthesis) and about 1300 F g(-1) for the CNOs/Ppy bilayer (electrochemical deposition).

A simple and regiospecific aminohydroxylation of olefins by photoredox catalysis has been developed. N-protected 1-aminopyridinium salts are the key compounds and serve as amidyl radical precursors by the action of Ir photocatalysts, fac-[Ir(ppy)3] and [Ir(ppy)2 (dtbbpy)](PF6) (ppy=2-pyridylphenyl, dtbbpy=4,4'-di-tert-butyl-2,2'-bipyridine). The present photocatalytic system allows for synthesis of vicinal aminoalcohol derivatives from olefins with various functional groups under mild reaction conditions with easy handling.

Polythiophene (PTh) and polypyrrole (PPy) as sorbent phases for solid phase microextraction (SPME) were applied in order to extract the multi-resistant Staphylococcus aureus (MRSA) antibiotic drugs (linezolid and daptomycin) from whole blood followed by high performance liquid chromatography (HPLC) determination with UV detection. Relative standard deviations (RSDs) of in vitro and pseudo in vivo measurements performed in whole blood were in the range of 4.58-15.91% and 6.09-17.33% for linezolid and daptomycin, respectively. Determination coefficients (R(2)) were in range of 0.9884-0.9945 and 0.9807-0.9818 for linezolid and daptomycin, respectively. This study proved better adsorption capacity of PTh SPME coating compared to PPy coating for both, linezolid and daptomycin.

The exponential growth in published studies on phosphorescent metal complexes has been triggered by their utilization in optoelectronics, solar energy conversion, and biological labeling applications. Very recent breakthroughs in organic photoredox transformations have further increased the research efforts dedicated to discerning the inner workings and structure-property relationships of these chromophores. Initially, the principal focus was on the Ru(II)-tris-diimine complex family. However, the limited photostability and lack of luminescence tunability discovered in these complexes prompted a broadening of the research to include 5d transition metal ions. The resulting increase in ligand field splitting prevents the population of antibonding eg* orbitals and widens the energy range available for color tuning. Particular attention was given to Ir(III), and its cyclometalated, cationic complexes have now replaced Ru(II) in the vast majority of applications. At the start, this Account documents the initial efforts dedicated to the color tuning of these complexes for their application in light emitting electrochemical cells, an easy to fabricate single-layer organic light emitting device (OLED). Systematic modifications of the ligand sphere of [Ir(ppy)2bpy]+ (ppy: 2-phenylpyridine, bpy: 2,2'-bipyridine) with electron withdrawing and donating substituents allowed access to complexes with luminescence emission maxima throughout the visible spectrum exhibiting room temperature excited state lifetimes ranging from nanoseconds to dozens of microseconds and quantum yields up to 15 times that of [Ru(bpy)3]2+. The diverse photophysical properties were also beneficial when using these Ir(III) complexes for driving solar fuel-producing reactions. For instance, photocatalytic water-reduction systems were explored to gain access to efficient water splitting systems. For this purpose, a variety of water reduction catalysts were paired with libraries of Ir(III) photosensitizers in high-throughput photoreactors. This parallelized approach allowed exploration of the interplay between the diverse photophysical properties of the Ir compounds and the electron-accepting catalysts. Further work enhanced and simplified the critical electron transfer processes between these two species through the use of bridging functional groups installed on the photosensitizer. Later, a novel approach summarized in this Account explores the possibility of using Zn metal as a solar fuel. Structure-activity relationships of the light-driven reduction of Zn2+ to Zn metal are described. DFT calculations along with cyclic voltammetry were utilized to gain clear insights into the complexes' electronic structures responsible for the effective photochemical properties observed in these dyes. While [Ir(ppy)2bpy]+ and its derivatives were found to be much more photostable than the Ru(II)-tris-diimine complex family, mass spectrometry indicated that the bpy ligand still photodissociated under extensive illumination. An interesting new approach involved the substitution of the bidentate 2,2'-bipyridine with a stronger chelating terpyridine ligand. This approach leaves room for one 2-phenylpyridine ligand and a third, anionic ligand, either Cl- or CN-. This Account reviews the effect of structural modifications on the photophysical properties of these [Ir(tpy)(ppy)X]+ complexes and corroborates the findings with the results obtained through DFT modeling. These complexes found application in photocatalytic CO2 reductions as well as a solvent tolerant light-absorber for the photogeneration of hydrogen. It was also documented that the robustness of these dyes in photoredox processes supersedes those of the commercially available [Ir(ppy)2(dtbbpy)]PF6 and [Ir(dF(CF3)ppy)2(dtbbpy)]PF6 complexes pioneered in the Bernhard laboratory.

A functionalized nylon6/polypyrrole core-shell nanofibers mat (PA6/PPy NFM) was prepared via situ polymerization on nylon6 electrospun nanofibers mat (PA6 NFM) template and used as an adsorbent to remove atrazine from aqueous solutions. The core-shell structure of PA6/PPy NFM can be clearly proved under scanning electron microscope (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The effects of initial solution pH and ionic strength, as well as the comparison of the adsorption capacity of functionalized (PA6/PPy NFM) and non-functionalized (PA6 NFM) adsorbent, were examined to reveal the possible adsorption mechanism. The results indicated that π-π interaction and electrostatic interaction should play a key role in the adsorption process. The kinetics and thermodynamics studies also further elucidated the detailed adsorption characteristics of atrazine removal by PA6/PPy NFM. The adsorption of atrazine could be well described by the pseudo-second-order equation. The adsorption equilibrium data was well fitted with the Freundlich isotherm model with a maximum adsorption capacity value of 14.8 mg/g. In addition, the increase of adsorption rate caused by a temperature increase could be felicitously explained by the endothermic reaction. The desorption results showed that the adsorption capacity remained almost unchanged after six adsorption/desorption cycles. These results suggest that PA6/PPy NFM could be employed as an efficient adsorbent for removing atrazine from contaminated water sources.

BACKGROUND

Indoor residual spraying of insecticide (IRS) is a key intervention for reducing the burden of malaria in Africa. However, data on the impact of IRS on malaria in pregnancy and birth outcomes is limited.

METHODS

An observational study was conducted within a trial of intermittent preventive therapy during pregnancy in Tororo, Uganda. Women were enrolled at 12-20 weeks of gestation between June and October 2014, provided with insecticide-treated bed nets, and followed through delivery. From December 2014 to February 2015, carbamate-containing IRS was implemented in Tororo district for the first time. Exact spray dates were collected for each household. The exposure of interest was the proportion of time during a woman's pregnancy under protection of IRS, with three categories of protection defined: no IRS protection, >0-20 % IRS protection, and 20-43 % IRS protection. Outcomes assessed included malaria incidence and parasite prevalence during pregnancy, placental malaria, low birth weight (LBW), pre-term delivery, and fetal/neonatal deaths.

RESULTS

Of 289 women followed, 134 had no IRS protection during pregnancy, 90 had >0-20 % IRS protection, and 65 had >20-43 % protection. During pregnancy, malaria incidence (0.49 vs 0.10 episodes ppy, P = 0.02) and parasite prevalence (20.0 vs 8.9 %, P < 0.001) were both significantly lower after IRS. At the time of delivery, the prevalence of placental parasitaemia was significantly higher in women with no IRS protection (16.8 %) compared to women with 0-20 % (1.1 %, P = 0.001) or >20-43 % IRS protection (1.6 %, P = 0.006). Compared to women with no IRS protection, those with >20-43 % IRS protection had a lower risk of LBW (20.9 vs 3.1 %, P = 0.002), pre-term birth (17.2 vs 1.5 %, P = 0.006), and fetal/neonatal deaths (7.5 vs 0 %, P = 0.03).

CONCLUSIONS

In this setting, IRS was temporally associated with lower malaria parasite prevalence during pregnancy and at delivery, and improved birth outcomes. IRS may represent an important tool for combating malaria in pregnancy and for improving birth outcomes in malaria-endemic settings. Trial Registration Current Controlled Trials Identifier NCT02163447.

The intrinsic properties and application potential of nanocolloids are mainly determined by size, shape, composition, and structure. In this case, a novel glucose biosensor was developed by using the chitosan-polypyrrole (CS-PPy) nanocomposites as special modified materials that coating onto the surface of glassy carbon electrode (GCE). The CS-PPy nanocomposites were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), respectively. Moreover, the interaction of CS-PPy nanocomposites with glucose oxidase (GOD) was also investigated by the combined studies with Fourier transform infrared spectroscopy (FTIR) and circular dichroism spectroscopy (CD). Due to the conductivity of polypyrrole (PPy), good biocompatibility of CS, and advantages of nanoparticles, CS-PPy nanocomposites were chosen and designed to modify the GCE for the retention of GOD's biological activity and the vantage of electron transfer between GOD and electrodes. The GOD biosensor exhibited a fast amperometric response (5s) to glucose, a good linear current-time relation over a wide range of glucose concentrations from 5.00×10(-4) to 1.47×10(-1)M, and a low detection limit of 1.55×10(-5)M. The GOD biosensor modified with CS-PPy nanocomposites will have essential meaning and practical application in future that attributed to the simple method of fabrication and good performance.

Paris polyphylla Smith var. yunnanensis (Franch.) Hand.-Mazz (PPY) was a frequently used herbal medicine in pharmaceutical field and different provenances might affect the clinical efficacy. Tracing the geographical origin was an important portion for PPY authentication and quality assessment. Present study was compared low-, mid- and high-level data fusion methodology for geographical traceability of PPY samples (161 batches) combined with multivariate classification methods such as support vector machine gird search (SVM-GS) and random forest (RF) on the basis of Fourier transform mid-infrared (FT-MIR) and ultraviolet-visible (UV-Vis) spectra. Compared with the low- and mid-level data fusion strategy results basing on SVM-GS algorithm, result of high-level data fusion method (calculated by RF) was more satisfying. Result of RF basing on high-level data fusion strategy showed that merely two samples were misclassified and one sample was multiple assigned after voting with fuzzy set theory. Values of specificity, sensitivity, and accuracy rates were exceeded 0.91, 0.99 and 90.91%, for each class respectively, satisfying results of these were shown in training and test sets for high-level data fusion method. This feasible result indicated that the RF algorithm could establish a reliable and good performance model in geographical traceability on the basis of high-level data fusion strategy. Combination of high-level data fusion and RF algorithm could consider as a good choice for establishing a discrimination multivariate model for origins identification of PPY samples.

The electrically conducting polymer polypyrrole (PPy) was electrochemically deposited onto Pt microelectrodes on a polyimide (PI) substrate. Pre-modification of the PI surface with a self-assembled monolayer of octadecyltrichlorosilane-induced anisotropic lateral growth of PPy along the PI surface and enhanced adhesive strength of the PPy film. The lateral growth of PPy film around the electrode anchored the whole film to the substrate. External stimulation of cultured cardiac myocytes was carried out using the PPy-coated microelectrode. The myocytes on the microelectrode substrate were electrically conjugated to form a sheet, and showed synchronized beating upon stimulation. The threshold charge for effective stimulation of a 0.8 cm(2) sheet of myocytes was around 0.2 microC, roughly corresponding to a membrane depolarization of 250 mV.

Polypyrrole (PPy) is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We embedded PPy into poly(lactic acid) (PLA) nanofibers via electrospinning and fabricated a PLA/PPy nanofibrous scaffold containing 15% PPy with sustained conductivity and aligned topography. There was good biocompatibility between the scaffold and human umbilical cord mesenchymal stem cells as well as Schwann cells. Additionally, the direction of cell elongation on the scaffold was parallel to the direction of fibers. Our findings suggest that the aligned PLA/PPy nanofibrous scaffold is a promising biomaterial for peripheral nerve regeneration.

Hybrid helical magnetic microrobots are achieved by sequential electrodeposition of a CoNi alloy and PPy inside a photoresist template patterned by 3D laser lithography. A controlled actuation of the microrobots by a rotating magnetic field is demonstrated in a fluidic environment.

A new amperometric uric acid biosensor was developed by immobilizing uricase by a glutaraldehyde crosslinking procedure on polyaniline-polypyrrole (pani-ppy) composite film on the surface of a platinum electrode. Determination of uric acid was performed by the oxidation of enzymatically generated H₂O₂ at 0.4 V vs. Ag/AgCl. The linear working range of the biosensor was 2.5×10-6 - 8.5×10-5 M and the response time was about 70 s. The effects of pH, temperature were investigated and optimum parameters were found to be 9.0, 55 oC, respectively. The stability and reproducibility of the enzyme electrode have been also studied.

Neuronal activities play critical roles in both neurogenesis and neural regeneration. In that sense, electrically conductive and biocompatible biomaterial scaffolds can be applied in various applications of neural tissue engineering. In this study, we fabricated a novel biomaterial for neural tissue engineering applications by coating electrospun poly(lactic acid) (PLA) nanofibers with a conducting polymer, polypyrole (PPy), via admicellar polymerization. Optimal conditions for polymerization and preparation of PPy-coated electrospun PLA nanofibers were obtained by comparing results from scanning electron microscopy, X-ray photoelectron spectrometer, and surface conductivity tests. In vitro cell culture experiments showed that PPy-coated electrospun PLA fibrous scaffold is not toxic. The scaffold could support attachment and migration of neural progenitor cells. Neurons derived from progenitor exhibited long neurite outgrowth under electrical stimulation. Our study concluded that PPy-coated electrospun PLA fibers had a good biocompatibility with neural progenitor cells and may serve as a promising material for controlling progenitor cell behaviors and enhancing neural repair.