The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Twenty diclofenac sodium buccoadhesive discs containing Cp974p, polycarbophil, PEO, SCMC-medium viscosity (SCMC-MV), SCMC-ultrahigh viscosity (SCMC-UHV) or their combinations were prepared. These buccoadhesive discs were evaluated for release pattern, swelling capacity, surface pH, mucoadhesion performance, and in vitro permeation of diclofenac sodium through buccal membranes. In vivo testing of mucoadhesion time, strength of adhesion, irritation, bitterness due to drug swallowing and disc disintegration in the buccal cavity were also performed. Drug bioavailability of a selected diclofenac sodium buccoadhesive product was then compared with that of Voltarin 100 SR tablet. The percentage relative bioavailability of diclofenac sodium from the selected buccoadhesive disc 50 mg was found to be 141.31%.

The purpose of the study was to investigate the effect of drug solubility on polymer hydration and drug dissolution from modified release matrix tablets of polyethylene oxide (PEO). Different PEO matrix tablets were prepared using acetaminophen (ACE) and ibuprofen (IBU) as study compounds and Polyox WSR301 (PEO) as primary hydrophilic matrix polymer. Tablet dissolution was tested using the USP Apparatus II, and the hydration of PEO polymer during dissolution was recorded using a texture analyzer. Drug dissolution from the preparations was dependent upon drug solubility, hydrogel formation and polymer proportion in the preparation. Delayed drug release was attributed to the formation of hydrogel layer on the surface of the tablet and the penetration of water into matrix core through drug dissolution and diffusion. A multiple linear regression model could be used to describe the relationship among drug dissolution, polymer ratio, hydrogel formation and drug solubility; the mathematical correlation was also proven to be valid and adaptable to a series of study compounds. The developed methodology would be beneficial to formulation scientists in dosage form design and optimization.

Both dominant and recessive missense mutations were recently reported in the gene encoding the mitochondrial DNA polymerase gamma (POLG) in patients with progressive external ophthalmoplegia (PEO). The authors report on a patient homozygous for a recessive missense mutation in POLG who presented with a multisystem disorder without PEO. The most prominent features were myoclonus, seizure, and sensory ataxic neuropathy, so the clinical picture overlapped with the syndrome of myoclonus, epilepsy, and ragged red fibers (MERRF).

OBJECTIVE

We report here the clinical and genetic features of two new families with autosomal dominant progressive external ophthalmoplegia (adPEO).

METHODS

The examination of index patients included a detailed clinical characterisation, histological analysis of muscle biopsy specimens, and genetic testing of mitochondrial and nuclear DNA extracted from muscle and leucocytes.

RESULTS

Index patients in both families presented with PEO and developed other clinical disease manifestations, such as myopathy and cardiomyopathy (patient 1) and axonal neuropathy, diabetes mellitus, hearing loss, and myopathy (patient 2), later in the course of illness. Both patients had ragged red fibres on muscle histology. Southern blot of mtDNA from muscle of patient 2 showed multiple deletions. In this case, a novel heterozygous missense mutation F485L was identified in the nuclear encoded putative mitochondrial helicase Twinkle. The mutation co-segregated with the clinical phenotype in the family and was not detected in 150 control chromosomes. In the other index patient, sequencing of ANT1, C10orf2 (encoding for Twinkle), and POLG1 did not reveal pathogenic mutations.

CONCLUSIONS

Our cases illustrate the clinical variability of adPEO, add a novel pathogenic mutation in Twinkle (F485L) to the growing list of genetic abnormalities in adPEO, and reinforce the relevance of other yet unidentified genes in mtDNA maintenance and pathogenesis of adPEO.

With the recent advent of nanotechnology for pharmaceutical applications, drug particle engineering is the focus of increasing interest as a viable approach for overcoming solubility limitations of poorly water-soluble drugs. Although these particle engineering techniques have been proven successful for enhancing the dissolution properties of many poorly water-soluble drugs, there are limitations associated with them such as particle aggregation, morphological instability, and poor wettability. The aim of this study was to demonstrate a processing technique in which hot-melt extrusion (HME) is utilized to overcome these limitations. Micronized particles of amorphous itraconazole (ITZ) stabilized with PVP or HPMC were produced and subsequently melt extruded with poloxamer 407 and PEO 200 M to deaggregate and disperse the particles into the hydrophilic polymer matrix. Differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy were used to demonstrate that the HME process did not alter the properties of the micronized particles. Dissolution testing conducted at sink conditions revealed that the dissolution rate of the micronized particles was improved by HME due to particle deaggregation and enhanced wetting. Supersaturation dissolution testing demonstrated that the ITZ-HPMC micronized particle extrudates provided superior supersaturation of ITZ compared to the ITZ-PVP micronized particle extrudates. Supersaturation dissolution testing incorporating a pH change (from pH 1.2 to 6.8 at 2 h) revealed that neither micronized particle extrudate formulation significantly reduced the rate of ITZ precipitation from supersaturated solution once pH was increased. Moreover, the two extrudate formulations performed very similarly when only considering dissolution testing from just before pH adjustment through the duration of testing at neutral pH. From oral dosing of rats, it was determined that the two extrudate formulations performed similarly in vivo as confirmed by their statistically equivalent AUC values. By correlating the results of supersaturation dissolution testing with pH change to the in vivo AUC, it appears that rapid precipitation of ITZ occurs upon entrance into the more neutral pH environment of the small intestine resulting in a brief opportunity for absorption. This suggests that perhaps the optimum formulation approach for ITZ is to control drug release so as to retard precipitation as pH is increased and extend the absorption window in the small intestine.

In this study, a new poly(lactic acid)-poly (ethylene oxide)-Arg-Gly-Asp (PLA-PEO-RGD) derivative was synthesized, and paclitaxel-loaded PLA-PEO-RGD micelles were prepared by this derivative. The solubility assay showed that micelles mixed with Pluronic F-68 as surfactant could increase the solubility of this hydrophobic paclitaxel in aqueous solution. The cell-binding assay showed that PLA-PEO-RGD micelle (IC(50) = 11.13 +/- 1.38 nmol/L) had about 3.6-fold higher integrin avidity than PLA-PEO-RGD conjugates (IC(50) = 40.33 +/- 3.12 nmol/L). The avidity of micelle was also higher than RGD4C peptide (IC(50) = 24.44 +/- 1.21 nmol/L). The in vitro drug release profile of drug-loaded PLA-PEO-RGD micelles exhibited initial burst release to 37% +/- 2% (w/w) during the first 12 h, and then the release rate became steady in a controlled release manner. Furthermore, treatment of the MDA-MB-435 breast cancer cell line with paclitaxel-loaded PLA-PEO-RGD micelles yielded cytotoxicities, with EC(50) values of approximately 30 mumol/L. The paclitaxel-loaded PLA-PEO-RGD micelles treated group showed the most dramatic tumor reduction in MDA-MB-435 tumor-bearing nude mice, and the final mean tumor load was 31 +/- 16 mm(3) (mean +/- SD; n = 8). (125)I-labeled micelles administration resulted in significant (p < 0.001) higher tumor uptake (2.68% +/- 0.14%, ID/g) of PLA-PEO-RGD micelles compared to PLA-PEO micelles (0.84% +/- 0.09%, ID/g) after 2.5 h postinjection. Biodistribution study showed the best blood clearance of PLA-PEO-RGD micelles after 4.5 h postinjection. The results of this study suggest that paclitaxel-loaded PLA-PEO-RGD micelles based on the specific recognition of alpha(V)beta(3) integrin represent a potential and powerful target delivery technology.

Novel poly(ethylene oxide)-graft-doxorubicin (PEO-g-DOX) prodrugs with DOX covalently conjugated to PEO via a pH-sensitive hydrazone bond were developed. PEO-g-DOX conjugates could be readily prepared in the following steps: (i) anionic ring-opening copolymerization of ethylene oxide (EO) and allyl glycidyl ether (AGE) afforded functional PEO with controlled molecular weights, low polydispersities, and multiple pendant double bonds (PEO-g-allyl); (ii) conjugation of PEO-g-allyl with methyl mercaptoacetate, followed by treating with hydrazine hydrate, quantitatively transformed allyl into hydrazide groups (PEO-g-hydrazide); and (iii) DOX was covalently immobilized to PEO-g-hydrazide via acid-labile hydrazone bonds (PEO-g-DOX). Here on the basis of PEO-g-allyl(4.4) (M(n GPC) = 22 400, PDI = 1.19) and PEO-g-allyl(7.1) (M(n GPC) = 15 300, PDI = 1.16, the subscription refers to number of allyl groups per chain) two freely water-soluble PEO-g-DOX prodrugs with 2.9 and 3.6 DOX per molecule (denoted as PEO-g-DOX(2.9) and PEO-g-DOX(3.6), corresponding to drug loading content of 5.6 and 9.0 wt %, respectively) were obtained. The in vitro release studies confirmed much faster release of DOX at pH 5.0 and 6.0 than at pH 7.4. For example, approximately 16, 52, and 61% of drug were released in 22 h, and 23, 83, and 92% of drug were released in 120 h from PEO-g-DOX(2.9) at pH 7.4, 6.0 and 5.0, respectively. Notably, confocal laser scanning microscope (CLSM) observations revealed that DOX was released and delivered into the nuclei of RAW 264.7 cells following 24 h of incubation. MTT assays demonstrated that PEO-g-DOX(2.9) had pronounced cytotoxic effects to RAW 264.7, HeLa, and 4T1 breast tumor cells with IC(50) values of about 26.5, 42.5, and 32.0 μg DOX equiv/mL, whereas the corresponding polymer carrier PEO-g-hydrazide(4.4) was nontoxic. The In Vivo pharmacokinetics and biodistribution studies in mice showed that PEO-g-DOX(2.9) prodrugs had significantly prolonged circulation time and enhanced drug accumulation in the tumor as compared with free DOX. We are convinced that endosomal pH-activatable PEO-g-DOX prodrugs have tremendous potential for targeted cancer therapy.

The potential for base poly(ethylene glycol) graft poly(acrylic acid) PEG-g-PA copolymers and surface-modified PEG-g-PA materials to inhibit random protein fouling and bacterial adhesion are investigated. PEG-g-PA co-polymers were synthesized that inhibited non-specific protein and cellular adhesion. PEG-g-PA co-polymers were then covalently modified with either cell adhesion peptides (YRGDS, YEILDV) or fragments of antibodies to monocyte/macrophage integrin receptors (Anti-VLA4, Anti-beta1, Anti-beta2, and Anti-CD64) known to enhance macrophage adhesion and, perhaps, modulate their activation. Materials produced in this work were characterized using: hydrophobicity by contact angle; angle-resolved X-ray Photoelectron Spectroscopy to confirm the presence of PEG in the bulk material and the surface; degree of hydration; differential scanning calorimetry; and thermal gravimetric analysis. To evaluate the non-fouling efficacy of the various modified surfaces, three proteins, human serum albumin, human fibronectin (Fraction I) and human immunoglobulin were 125I labeled. Samples of base PEG-g-PA and PEG-g-PA, modified with various peptides, were exposed to solutions containing either 2 or 200 microg/ml of one of the labeled proteins at 37 degrees C for 24 h. PEG-g-PA substrata modified with directly bound peptides exhibited protein adsorption that varied depending upon the surface bounded peptide. PEG-g-PA modified with peptides linked by linear PEG tethers reduced protein adsorption at 24 h by approximately 45% in comparison to PEG-g-PA. Peptides linked by way of StarPEO and StarlikePEO tethers further decreased protein adsorption in comparison to PEG-g-PA. The ability of peptide:PEOtethers to inhibit protein adsorption appeared to be a function of type and surface coverage of the PEO tether and not influenced by the amount or molecular structure the tethered peptide. Peptides directly coupled to the PEG-g-PA increased the amount of protein fouling relative to controls and there appeared to be some dependency of the amount of protein adsorption on which peptide was tethered. Two 14C-labeled pathogens, Staphylococcus epidermidis and Pseudomonas aeruginosa, were used to quantify the degree of bacterial adhesion using two types of laminar flow cell chambers; one that provided invasive sampling of the target substrata and one that provided non-invasive microscopic surveillance of adhering bacterial cells. Attachment of both species to PEG-g-PA and peptide-modified PEG-g-PA was reduced compared to the basic poly(acrylic acid). Presence of peptides on the surface, whether directly bound or bound by the PEO tether did not influence adhesion of P. aeruginosa relative to controls. S. epidermidis adhesion rates increased slightly for those materials where peptides were directly bound to the surface but were reduced relative to base PEG-g-PA when peptides were bound by PEO tethers. All PEG-g-PA surfaces modified with fragments of monoclonal antibodies dramatically enhanced bacterial initial adhesion rates and maximum extent of attachment.

This study focused on the occurrence and behaviour in wastewater and surface waters of several phenolic endocrine disrupting compounds (EDCs) including parabens, alkylphenolic compounds, phenylphenol (PhP) and bisphenol A (BPA). Analytical procedures using solid-phase-extraction and LC-MS/MS techniques were applied to samples of influents and effluents of wastewater treatment plants (WWTPs) discharging into the Glatt River (Switzerland) as well as to river water samples. A mass flow analysis provided insight into the main sources and the fate of these contaminants during different weather conditions. Concentrations in influents were in the low microg/L range for most analytes. Removal of parabens in the WWTPs was mostly above 99%. Nonylphenol polyethoxylates (A(9)PEO) removal amounted to 98%, but in some cases nonylphenoxy acetic acid (A(9)PEC) or nonylphenols (NP) were formed. In effluents, concentrations were highest for the A(9)PEC, A(9)PEO and NP. Concentrations in river water were in the high ng/L range for alkylphenolic compounds and in the low ng/L range for BPA, PhP and the parabens. During the sampling period, in which several rain events occurred, both water flows and mass flows varied strongly. Mass flows in WWTP effluents and in the river increased with increasing water flows for most compounds indicating that higher water flows do not lead necessarily to a proportional dilution of the pollutants. Throughout the low water flow period, mass flows predicted from the known inputs were similar to the actual mass flows at the end of the river for most analytes. For none of the EDCs, significant in-stream removal could be observed. In the periods with high water flows, mass flows in the river were much higher than can be explained by the initially defined sources. Discharge of untreated wastewater influent into the river was assessed as an additional source. Adding this source improved the mass balance for some, but not all of the analytes.

PEO-PPO-PEO/PEG shell cross-linked nanocapsules encapsulating an oil phase in their nanoreservoir structure was developed as a target-specific carrier for a water-insoluble drug, paclitaxel. Oil-encapsulating PEO-PPO-PEO/PEG composite nanocapsules were synthesized by dissolving an oil (Lipiodol) and an amine-reactive PEO-PPO-PEO derivative in dichloromethane and subsequently dispersing in an aqueous solution containing amine-functionalized six-arm-branched poly(ethylene glycol) by ultrasonication. The resultant shell cross-linked nanocapsules had a unique core/shell architecture with an average size of 110.7 +/- 9.9 nm at 37 degrees C, as determined by dynamic light scattering and transmission electron microscopy. Paclitaxel could be effectively solubilized in the inner Lipiodol phase surrounded by a cross-linked PEO-PPO-PEO/PEG shell layer. The paclitaxel-loaded nanocapsules were further conjugated with folic acid to achieve folate receptor targeted delivery. Confocal microscopy and flow cytometric analysis revealed that folate-mediated targeting significantly enhanced the cellular uptake and apoptotic effect against folate receptor overexpressing cancer cells. The present study suggested that these novel nanomaterials encapsulating an oil reservoir could be potentially applied for cancer cell targeted delivery of various water-insoluble therapeutic and diagnostic agents.

Much difficulty has been encountered in manipulating small-scale materials, such as submicron colloidal particles and macromolecules (e.g., DNA and proteins), in microfluidic devices since diffusion processes due to thermal (Brownian) motion become more pronounced with decreasing particle size. Here, we present a novel approach for the continuous focusing of such small-scale materials. First, we successfully focused fluorescent submicron polystyrene (PS) beads along equilibrium positions in microchannels through the addition of a small amount water-soluble polymer [500 ppm poly(ethylene oxide) (PEO)]. Lateral migration velocity significantly depends upon the viscoelastic effect (Weissenberg number: Wi) and the aspect ratio of particle size to channel height (a/h). Interestingly, focusing using viscoelastic flows was also observed for flexible DNA molecules (λ-DNA and T4-DNA), which have radii of gyration (R(g)) of approximately 0.69 μm and 1.5 μm, respectively. This small-scale material manipulation using medium viscoelasticity will contribute to the design of nanoparticle separation and genomic mapping devices.

In this study QDs were encapsulated in carboxylated PluronicF127 (F127COOH) triblock polymeric micelles and conjugated with anti-mesothelin antibody for the purpose of alleviating potential toxicity, enhancing the stability and improving targeting efficiency of CdTe/ZnS quantum dots (QDs) in tumors. The amphiphilic triblock polymer of F127COOH contains hydrophilic carboxylated poly(ethylene oxide) (PEO) and hydrophobic poly(propylene oxide) (PPO) units. After encapsulating QDs into carboxylated F127 (F127COOH-QD) micelles, the particles were conjugated with anti-mesothelin antibodies to allow targeting of cancerous areas. The size of the monodispersed spherical QD-containing micelles was determined to be ∼120 nm by dynamic light scattering (DLS). The critical micelle concentration (CMC) was estimated to be 4.7 × 10(-7) M. In an in vitro study, the anti-methoselin antibody conjugated F127COOH (Me-F127COOH-QD) nanomicelles showed negligible cytotoxicity to pancreatic cancer cells (Panc-1). Confocal microscopy demonstrated that the Me-F127COOH-QD nanomicelles were taken up more efficiently by Panc-1 cells, due to antibody mediated targeting. An in vivo imaging study showed that Me-F127COOH-QD nanomicelles accumulated at the pancreatic tumor site 15 min after intravenous injection. In addition, the low in vivo toxicity of the nanomicellar formulation was evaluated by pathological assays. These results suggest that anti-mesothein antibody conjugated carboxylated F127 nanomicelles may serve as a promising nanoscale platform for early human pancreatic cancer detection and targeted drug delivery.

Star-block copolymer based on PBLG as the hydrophobic part and PEO as the hydrophilic one (as abbreviated GEG) was synthesized and characterized. Polymeric micelle was prepared by the diafiltration method. From the measurement of photon correlation spectroscopy, the nanoparticle sizes of GEG-1, GEG-2 and GEG-3 were 106.5+/-59.2, 43.8+/-0.7 and 13.5+/-1.0 nm in number average, respectively, indicating of the formation of polymeric micelle. Also, the nanoparticle sizes were dependent on the PBLG chain length, i.e. the more PBLG content in the copolymer, the larger the particle size. From the observation of transmission electron microscope(TEM), GEG-2 block copolymer had almost spherical shapes with size range about 20-70 nm, that was similar to particle size measurement. Fluorescence spectroscopy measurement indicated that GEG block copolymers associated in water to form polymeric micelles and critical micelle concentration (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymer. Characteristic peaks of the protons of the benzyl group in the PBLG and the methylene protons adjacent to the benzyl group of the PBLG segment in the GEG-2 nanoparticles appeared in 7.2 approximately 7.4 and 5.0 approximately 5.2 ppm, respectively, and disappeared in D(2)O, indicating the restricted motions of these protons within the micellar core and the very rigid structure of the PBLG core in the GEG polymeric micelles. Release of ADR from the polymeric micelles in vitro was slower in longer PBLG chain length and higher loading contents of ADR.

BACKGROUND

Postsurgical epidural adhesions and fibrosis after surgery for lumbar disc herniation are a consequence of normal wound healing. The presence of fibrosis renders reoperations risky, and in some patients fibrosis may lead to nerve root tethering.

OBJECTIVE

One approach to minimizing the risk of developing epidural adhesions is to provide a barrier between the dural membrane and the healing connective tissues. The purpose of these studies was to evaluate such a barrier device.

METHODS

In vivo investigation in an animal model at a university laboratory.

METHODS

Rabbit.

METHODS

Gross and histomorphic evaluation.

METHODS

Barriers comprised of carboxymethylcellulose (CMC) and polyethylene oxide (PEO) (Oxiplex; FzioMed, Inc., San Luis Obispo, CA) were studied as devices to reduce epidural adhesion formation in rabbit laminotomy and laminectomy models. The barriers tested were either a gel alone (gel) or a gel covered with a film (gel/film combination). Two laminotomy or laminectomy sites (depending on the surgical method) were created in each rabbit at L4 and L6. One site was treated with a CMC/PEO gel, or CMC/PEO gel/film combination, and the other site served as a surgical control. Two surgical models that differed in the extent of adhesion formation at untreated injury sites and the method of injury generation were used.

RESULTS

Model A, which did not incorporate dural abrasion, resulted in up to 40% adhesion-free laminectomy sites in controls. Model B, which did incorporate abrasion of the dural membrane, resulted in less than 10% adhesion-free laminotomy sites in controls. Compositions of CMC/PEO gels (2.5% to 10% PEO) and films (22.5% PEO) were tested in both models. Efficacy parameters included measuring the number of sites free of epidural fibrosis and reduction in the severity of fibrosis (adhesions). Both gels and gel/film combinations consistently reduced the frequency and the extent of epidural fibrosis in both models. Gels of CMC/PEO containing a higher content of PEO (10%) and a higher molecular weight of PEO (4.4 mD) were most effective in Model B and resulted in up to 84% laminotomy sites with minimal or no epidural fibrosis, whereas controls exhibited over 90% of the sites with epidural fibrosis. Histological evaluation of the surgical sites indicated that the reduction of epidural fibrosis was accompanied by normal bone healing. In addition, these experiments demonstrated that the gel/film combination provided no additional benefit to that obtained by the gel alone.

CONCLUSIONS

Gels of CMC/PEO reduced epidural fibrosis and did not impair normal heal ing.

PEO-PPO-PEO triblock copolymers have opposing effects on lipid membrane integrity: they can behave either as membrane sealants or as membrane permeabilizers. To gain insights into their biomembrane activities, the fundamental interactions between a series of PEO-based polymers and phospholipid vesicles were investigated. Specifically, the effect of copolymer hydrophobicity on its ability to prevent liposomes from peroxidation was evaluated, and partitioning free energy and coefficient involved in the interactions were derived. Our results show that the high degree of hydrophilicity is a key feature of the copolymers that can effectively protect liposomes from peroxidation and the protective effect of the copolymers stems from their adsorption at the membrane surface without penetrating into the bilayer core. The origin of this protective effect induced by polymer absorption is attributed to the retardation of membrane hydration dynamics, which is further illustrated in the accompanying study on dynamic nuclear polarization (DNP)-derived hydration dynamics (Cheng, C.-Y.; Wang, J.-Y.; Kausik, R.; Lee, K. Y. C.; Han S. Biomacromolecules, 2012, DOI: 10.1021/bm300848c).

Single deletions of mitochondrial DNA (mtDNA) are associated with three major clinical conditions: Kearns-Sayre syndrome, a multisystem disorder; Pearson syndrome (PS), a disorder of the hematopoietic system; and progressive external ophthalmoplegia (PEO), primarily affecting the ocular muscles. Typically, single mtDNA deletions are sporadic events, since the mothers, siblings, and offspring of affected individuals are unaffected. We studied a woman who presented with PEO, ptosis, and weakness of pharyngeal, facial, neck, and limb muscles. She had two unaffected children, but another of her children, an infant son, had sideroblastic anemia, was diagnosed with PS, and died at age 1 year. Morphological analysis of a muscle biopsy sample from the mother showed cytochrome c oxidase-negative ragged-red fibers-a typical pattern in patients with mtDNA deletions. Southern blot analysis using multiple restriction endonucleases and probed with multiple mtDNA fragments showed that both the mother and her infant son harbored an identical 5,355-bp single deletion in mtDNA, without flanking direct repeats. The deletion was the only abnormal species of mtDNA identified in both patients, and there was no evidence for duplications. We conclude that, although the vast majority of single large-scale deletions in mtDNA are sporadic, in rare cases, single deletions can be transmitted through the germline.

Poly(ethylene oxide)-block-poly(epsilon-caprolactone) (PEO-b-PCL) and newly developed poly(ethylene oxide)-block-poly(alpha-benzyl carboxylate epsilon-caprolactone) (PEO-b-PBCL) micelles were evaluated for the solubilization and delivery of cucurbitacin I and B, poorly water soluble inhibitors of signal transducer and activator of transcription 3 (STAT3). Encapsulation of cucurbitacins in PEO-b-PCL and PEO-b-PBCL by co-solvent evaporation technique resulted in polymeric micelles <90 nm in diameter. The aqueous solubility of both derivatives increased from less than 0.05 mg/mL in the absence of the copolymer to around 0.30-0.44 and 0.65-0.68 mg/mL in the presence of 5000-5000 and 5000-24,000 PEO-b-PCL micelles, respectively. Maximum cucurbitacin solubilization was achieved with PEO-b-PBCL micelles for both derivatives. PEO-b-PCL micelles having longer PCL block were found to be more efficient in sustaining the rate of release for cucurbitacins. The anti-cancer and STAT3 inhibitory activity of polymeric micellar cucurbitacins were comparable with free drugs in B16.F10 melanoma cell line in vitro. Intratumoral injection of 1 mg/kg/day cucurbitacin I resulted in the regression of established B16.F10 mouse melanoma tumors in vivo. In comparison to free cucurbitacin I, PEO-b-PBCL micellar cucurbitacin I was found to provide comparable anti-cancer effects against B16.F10 tumors and limit drug levels in animal serum while maintaining high drug levels in tumor following intratumoral administration. The results indicate the potential of polymeric micelles as suitable vehicles for the delivery of cucurbitacin- I and B.

The mechanisms involved in the inhibition of protein adsorption by polyethylene oxide (PEO) are not completely understood, but it is believed that PEO chain length, chain density and chain conformation all play a role. In this work, surfaces formed by chemisorption of PEO-thiol to gold were investigated: the effects of PEO chain density, chain length (600, 750, 2000 and 5000 MW) and end-group (-OH, -OCH3) on protein adsorption from plasma are reported. Similar to previous single protein adsorption studies (L.D. Unsworth et al., Langmuir 2005;21:1036-41) it was found that, of the different surfaces investigated, PEO layers formed from solutions near the cloud point adsorbed the lowest amount of fibrinogen from plasma. Layers of hydroxyl-terminated PEO of MW 600 formed under these low solubility conditions showed almost complete suppression (versus controls) of the Vroman effect, with 20+/-1 ng/cm2 adsorbed fibrinogen at the Vroman peak and 6.7+/-0.6 ng/cm2 at higher plasma concentration. By comparison, Vroman peak adsorption was 70+/-20 and 50+/-3 ng/cm2, respectively, for 750-OCH3 and 2000-OCH3 layers formed under low solubility conditions; adsorption on these surfaces at higher plasma concentration was 16+/-9 and 12+/-3 ng/cm2. Thus in addition to the effect of solution conditions noted previously, the results of this study also suggest a chain end group effect which inhibits fibrinogen adsorption to, and/or facilitates displacement from, hydroxyl terminated PEO layers. Fibrinogen adsorption from plasma was not significantly different for surfaces prepared with PEO of molecular weight 750 and 2000 when the chain density was the same ( approximately 0.5 chains/nm2) supporting the conclusion that chain density may be the key property for suppression of protein adsorption. The proteins eluted from the surfaces after contact with plasma were investigated by SDS-PAGE and immunoblotting. A number of proteins were detected on the various surfaces including fibrinogen, albumin, C3 and apolipoprotein A-I. The blot responses were zero or weak for all four proteins of the contact system; some complement activation was observed on all of the surfaces studied.

Aqueous suspensions of mixtures of the rodlike virus tobacco mosaic virus (TMV) with globular macromolecules such as polyethylene oxide (PEO) or bovine serum albumin (BSA) phase separate and exhibit rich and strikingly similar phase behavior. Isotropic, nematic, lamellar, and crystalline phases are observed as a function of the concentration of the constituents and ionic strength. The observed phase behavior is considered to arise from attractions between the two particles induced by the presence of BSA or PEO. For the TMV/BSA mixtures, the BSA adsorbs to the TMV and bridging of the BSA between TMV produces the attractions. For TMV/PEO mixtures, attractions are entropically driven via excluded volume effects known alternatively as the "depletion interaction" or "macromolecular crowding."

Tyrosine hydroxylase (TH), the initial and rate-limiting enzyme in the biosynthesis of the neurotransmitter dopamine, is inactivated by peroxynitrite. The sites of peroxynitrite-induced tyrosine nitration in TH have been identified by matrix-assisted laser desorption time-of-flight mass spectrometry and tyrosine-scanning mutagenesis. V8 proteolytic fragments of nitrated TH were analyzed by matrix-assisted laser desorption time-of-flight mass spectrometry. A peptide of 3135.4 daltons, corresponding to residues V410-E436 of TH, showed peroxynitrite-induced mass shifts of +45, +90, and +135 daltons, reflecting nitration of one, two, or three tyrosines, respectively. These modifications were not evident in untreated TH. The tyrosine residues (positions 423, 428, and 432) within this peptide were mutated to phenylalanine to confirm the site(s) of nitration and assess the effects of mutation on TH activity. Single mutants expressed wild-type levels of TH catalytic activity and were inactivated by peroxynitrite while showing reduced (30-60%) levels of nitration. The double mutants Y423F,Y428F, Y423F,Y432F, and Y428F,Y432F showed trace amounts of tyrosine nitration (7-30% of control) after exposure to peroxynitrite, and the triple mutant Y423F,Y428F,Y432F was not a substrate for nitration, yet peroxynitrite significantly reduced the activity of each. When all tyrosine mutants were probed with PEO-maleimide activated biotin, a thiol-reactive reagent that specifically labels reduced cysteine residues in proteins, it was evident that peroxynitrite resulted in cysteine oxidation. These studies identify residues Tyr(423), Tyr(428), and Tyr(432) as the sites of peroxynitrite-induced nitration in TH. No single tyrosine residue appears to be critical for TH catalytic function, and tyrosine nitration is neither necessary nor sufficient for peroxynitrite-induced inactivation. The loss of TH catalytic activity caused by peroxynitrite is associated instead with oxidation of cysteine residues.

Organically modified aluminosilicate mesostructures were synthesized from two metal alkoxides with the use of poly(isoprene-b-ethyleneoxide) block copolymers (PI-b-PEO) as the structure-directing molecules. By increasing the fraction of the inorganic precursors with respect to the polymer, morphologies expected from the phase diagrams of diblock copolymers were obtained. The length scale of the microstructures and the state of alignment were varied using concepts known from the study of block copolymers. These results suggest that the use of higher molecular weight block copolymer mesophases instead of conventional low-molecular weight surfactants may provide a simple, easily controlled pathway for the preparation of various silica-type mesostructures that extends the accessible length scale of these structures by about an order of magnitude.

Poly(ethylene oxide) (PEO)-brushes are generally recognized as protein-repellent surfaces, and although a role in discouraging microbial adhesion has been established for some strains and species, no study exists on the effects of PEO-brushes on a large variety of bacterial and yeast strains. In this paper, a PEO-brush has been covalently attached to glass and silica by reaction in a polymer melt. Subsequently, the presence of a PEO-brush was demonstrated using contact angle measurements, X-ray photoelectron spectroscopy and ellipsometry. For five bacterial (Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus salivarius, Escherichia coli and Pseudomonas aeruginosa) and two yeast strains (Candida albicans and Candida tropicalis), adhesion to PEO-brushes was compared with adhesion to bare glass in a parallel plate flow chamber. The initial deposition rates of Sta. epidermidis, Sta. aureus and Str. salivarius to glass were relatively high, between 2400 and 2600 cm(-2) s(-1), while E. coli and P. aeruginosa deposited much more slowly. The initial deposition rates of the yeasts to glass were 144 and 444 cm(-2) s(-1) for C. albicans GB 1/2 and C. tropicalis GB 9/9, respectively. Coating of the glass surface with a PEO-brush yielded more than 98 % reduction in bacterial adhesion, although for the more hydrophobic P. aeruginosa a smaller reduction was observed. For both yeast species adhesion suppression was less effective than for the bacteria and here too the more hydrophobic C. tropicalis showed less reduction than the more hydrophilic C. albicans. The PEO-brush had a thickness of 22 nm in water, as inferred from ellipsometry. Assuming that on bare glass the adhered micro-organisms are positioned only a few nanometers away from the surface and that the brush keeps them at a distance of 22 nm, it is calculated that the brush yields a sevenfold attenuation of the Lifshitz-Van der Waals attraction to the surface between the micro-organisms and the surface. Decreased Lifshitz-van der Waals attraction may be responsible for the suppression of the microbial adhesion observed.

Thermospermine, a structural isomer of spermine, is produced through the action of ACAULIS5 (ACL5) and suppresses xylem differentiation in Arabidopsis thaliana. To elucidate the molecular basis of the function of thermospermine, we screened chemical libraries for compounds that can modulate xylem differentiation in the acl5 mutant, which is deficient in thermospermine and shows a severe dwarf phenotype associated with excessive proliferation of xylem vessels. We found that the isooctyl ester of a synthetic auxin, 2,4-D, remarkably enhanced xylem vessel differentiation in acl5 seedlings. 2,4-D, 2,4-D analogs and IAA analogs, including 4-chloro IAA (4-Cl-IAA) and IAA ethyl ester, also enhanced xylem vessel formation, while IAA alone had little or no obvious effect on xylem differentiation. These effects of auxin analogs were observed only in the acl5 mutant but not in the wild type, and were suppressed by the anti-auxin, p-chlorophenoxyisobutyric acid (PCIB) and α-(phenyl ethyl-2-one)-IAA (PEO-IAA), and also by thermospermine. Furthermore, the suppressor of acaulis51-d (sac51-d) mutation, which causes SAC51 overexpression in the absence of thermospermine and suppresses the dwarf phenotype of acl5, also suppressed the effect of auxin analogs in acl5. These results suggest that the auxin signaling that promotes xylem differentiation is normally limited by SAC51-mediated thermospermine signaling but can be continually stimulated by exogenous auxin analogs in the absence of thermospermine. The opposite action between thermospermine and auxin may fine-tune the timing and spatial pattern of xylem differentiation.